Erwin V. Zaretsky, P.E.
1. Carter, T.L. and Zaretsky, E.V.: “Rolling-Contact Fatigue Life of a Crystallized Glass Ceramic,” NASA TN D-259, 1960.
2. Carter, T.L., Zaretsky, E.V. and Anderson, W.J.: “Effect of Hardness and Other Mechanical Properties on Rolling-Contact Fatigue,” NASA TN D-270, 1960.
3. Zaretsky, E.V. and Anderson, W.J.: “Relation Between Rolling-Contact Fatigue Life and Mechanical Properties for Several Aircraft Bearing Steels,” Trans. ASTM, Vol. 60, 1960, pp. 627-649.
4. Zaretsky, E.V. and Anderson, W.J.: “Rolling Contact Fatigue Studies with Four Tool Steels and a Crystallized Glass Ceramic,” Trans. ASME, J. Basic Engr., Vol. 83, Ser. D, No. 4, 1961, pp. 603-612.
5. Harrell, S. and Zaretsky, E.V.: “Electron and Light Microscopy Techniques Suitable for Studying Fatigue Damage in a Crystallized Glass Ceramic,” NASA TN D-1161, 1961.
6. Anderson, W.J. and Zaretsky, E.V.: “Effect of Several Operating and Processing Variables on Rolling Fatigue,” Rolling Contact Phenomena, J. B. Bidwell, ed., Elsevier Publishing Co., Amsterdam, Holland, 1962. (Presented at Symposium on Aspects of Rolling Contact Phenomena, General Motors Research Laboratories, Warren, MI, Oct. 1960.)
7. Zaretsky, E.V., Anderson, W. J. and Parker, R. J.: “The Effect of Contact Angle on Rolling-Contact Fatigue and Bearing Load Capacity,” ASLE Trans., Vol. 5, No. 1, 1962, pp. 210-219.
8. Zaretsky, E.V., Anderson, W. J., and Parker, R. J.: “The Effect of Nine Lubricants on Rolling-Contact Fatigue Life,” NASA TN D-1404, 1962.
9. Zaretsky, E.V., Sibley, L.G., and Anderson, W. J.: “The Role of Elastohydrodynamic Lubrication in Rolling-Contact Fatigue,” Trans. ASME, J. Basic Engr., Vol. 85, Ser. D, No. 3, pp. 439-450, 1963.
10. Harrell, S. and Zaretsky, E.V.: “A Microscopic Examination of the Rolling-Contact Fatigue Process in a Crystallized-Glass Ceramic,” NASA TN D-2082, 1963.
11. Parker, R. J., Grisaffe, S. J., and Zaretsky, E.V.: “Surface Failure of Alumina Balls Due to Repeated Stresses Applied in Rolling-Contact at Temperatures to 2000oF,” NASA TN D-2274, 1964.
12. Parker, R. J., Grisaffe, S. J., and Zaretsky, E.V.: “Surface Failure of Titanium Carbide Cermet and Silicon Carbide Balls Due to Repeated Stresses Applied in Rolling Contact at Temperatures to 2000oF,” NASA TN D-2459, 1964.
13. Zaretsky, E.V., Parker, R. J., and Anderson, W. J.: “Effect of Component Differential Hardness on Rolling-Contact Fatigue and Load Capacity,” NASA TN D-2640, 1965.
14. Zaretsky, E.V., Parker, R. J., Anderson, W. J., and Miller, S.T.: “Effect of Component Differential Hardness on Residual Stress and Rolling-Contact Fatigue,” NASA TN D-2664, 1965.
15. Miller, S.T., Parker, R. J., and Zaretsky, E.V.: “Apparatus for Studying Ball Spinning Friction,” NASA TN D-2796, 1965.
16. Parker, R. J., Grisaffe, S. J., and Zaretsky, E.V.: “Rolling-Contact Studies with Four Refractory Materials to 2000oF,’ ASLE Trans., Vol. 8, No. 3, 1965, pp. 208-216
17. Zaretsky, E.V., Parker, R. J., Anderson, W. J., and Reichard, D. W.: “Bearing Life and Failure Distribution as Affected by Actual Component Differential Hardness,” NASA TN D-3101, 1965.
18. Parker, R. J., Zaretsky, E.V., and Anderson, W. J.: “Rolling-Contact Lubrication Studies with Polyphenyl Ethers at Reduced Pressures,” NASA TN D_3130, 1965.
19. Bisson, E.E., Anderson, W. J., Johnson, R. L., Zaretsky, E.V., and Ludwig, L. P.: “Lubricants, Bearings and Seals,” NASA SP-5053, 1965.
20. Parker, R. J., Zaretsky, E.V., and Anderson, W. J.: “A Review of Ball Motion in an Angular Contact Ball Bearing,” NASA TM X052207, 1966. (Presentation ASME Lubrication Symposium, New Orleans, June 1966.)
21. Zaretsky, E.V., and Anderson, W.J.: “Material Properties and Processing Variables and Their Effect on Rolling-Element Fatigue,” NASA TM X-52227, 1966. (Presentation at Dartmouth College in Hanover, New Hampshire, Bearing Conference, September 1966.)
22. Zaretsky, E.V.: “The Changing Technology of Rolling-Element Bearings,” Machine Design, Vol. 38, No. 24, October 13, 1966, pp. 205-223.
23. Zaretsky, E.V., Scibbe, H. W., and Brewe, D. E.: “Studies of Low and High Temperature Cage Materials,” Bearing and Seal Design in Nuclear Power Machinery, R. A. Burton, ed, ASME, NY, NY, 1967, pp. 33-51.
24. Zaretsky, E.V., Parker, R. J., and Anderson, W. J.: “Component Hardness Differences and Their Effect on Bearing Life,” Trans. ASME, J. Lubr. Tech., Vol. 89, No. 1, 1967, pp. 47-62.
25. Scibbe, H. W., Parker, R. J., and Zaretsky, E.V.: “Rolling-Contact Fatigue Life of SAE 52100 Steel Hollow Balls,” NASA TN D-3832. 1967.
26. Zaretsky, E.V., and Anderson, W. J.: “Evaluation of High-Temperature Bearing Cage Materials,” NASA TN D-3821, 1967.
27. Parker, R. J., Bamberger, E. N., and Zaretsky, E.V.: “Bearing Torque and Fatigue Life Studies with Several Lubricants for Use in Range 500o to 700oF,” NASA TN D-3948, 1967.
28. Zaretsky, E.V., and Anderson, W.J.: “Preliminary Determination of Temperature Limitations of Ester, Ether, and Hydrocarbon Base Lubricants in 25-mm Bore Ball Bearings,” NASA TN D-4146, 1967.
29. Parker, R. J., Bamberger, E. N., and Zaretsky, E.V.: “Evaluation of Lubricants for High Temperature Ball Bearing Applications,” Trans. ASME, J. Lubr. Tech., Vol. 90, No. 1, 1968, pp. 106-112.
30. Parker, R. J., Zaretsky, E.V., and Anderson, W. J.: “Spinning Friction Coefficients with Three Lubricants,” Trans. ASME, J. Lubr. Tech., Vol. 90, No. 1, 1968, pp. 330-331.
31. Reichard, D. W., Parker, R. J., and Zaretsky, E.V.: “Residual Stress and Subsurface Hardness Changes Induced During Rolling Contact,” NASA TN D-4456, 1968.
32. Reichard, D. W., Parker, R. J., and Zaretsky, E.V.: “Reduced-Pressure Environment Effects on Rolling-Element Fatigue Life with Super-Refined Mineral Oil Lubricant,” NASA TN D-4348, 1968.
33. Zaretsky, E.V., and Anderson, W.J.: “EHD Lubrication,” Machine Design, Vol. 40, No. 26, Nov. 7, 1968, pp. 167-173.
34. Parker, R. J., and Zaretsky, E.V.: “Rolling-Element Fatigue Life of Ausformed M-50 Steel Balls,” NASA TN D-4954, 1968.
35. Dietrich, M. W., Parker, R. J., and Zaretsky, E.V.: “Effect of Ball Race Conformity on Spinning Friction,” NASA TN D-4669, 1968.
36. Reichard, D. W., Parker, R. J., and Zaretsky, E.V.: “Studies of Rolling-Element Lubrication and Fatigue Life in a Reduced Pressure Environment,” ASLE Trans., Vol. 11, No. 3, 1968, pp. 275-280.
37. Anderson, W. J., and Zaretsky, E.V.: “Rolling-Element Bearings,” Machine Design, Vol. 40, No. 14, June 13, 1968, pp. 22-39. (Also reprinted Vol. 42, No. 15, June 18, 1970, pp. 21-37)
38. Bamberger, E. N., Zaretsky, E.V., and Anderson, W. J.: “Fatigue Life of 120-mm Bore Ball Bearings at 600oF with Fluorocarbon, Polyphenyl Ether, and Synthetic Synthetic Paraffinic Base Lubricants,” NASA TN D-4850, 1968.
39. Dietrich, M. W., Parker, R. J., Zaretsky, E.V., and Anderson, W. J.: “Contact Conformity Effects on Spinning Torque and Friction,” Trans. ASME, J. Lubr. Tech., Vol. 91, No. 2, 1969, pp. 308-313.
40. Zaretsky, E.V., Parker, R. J., and Anderson, W. J.: “A Study of Residual Stress Induced During Rolling,” Trans. ASME, J. Lubr. Tech.,Vol. 91, No. 2, 1969, pp. 314-319.
41. Parker, R. J., and Zaretsky, E.V.: “Effect of Oxygen Concentration on the Performance of Synthetic Oils in Short Term Bearing Tests from 400o to 500oF,” NASA TN D-5152, 1969.
42. Parker, R. J., and Zaretsky, E.V.: “Effect of Oxygen Concentration on an Advanced Ester Lubricant in Bearing Tests at 400o to 450oF,” NASA TN D-5262, 1969.
43. Parker, R. J., and Zaretsky, E.V.: “Effect of Oxygen Concentration on Synthetic Paraffinic and Advanced Ester Base Lubricants in Bearing Tests at 400o to 450oF,” NASA TM X-52556, 1969. (Paper Presented at ASME Spring Lubrication Symposium, June 1969.)
44. Zaretsky, E.V., Anderson, W. J., and Bamberger, E. N.: “Rolling-Element Bearing Life from 400o to 600oF,” NASA TN D-5002, 1969.
45. Townsend, D. P., Dietrich, M. W., and Zaretsky, E.V.: “Speed Effects on Ball Spinning Torque,” NASA TN D-5527, 1969.
46. Dietrich, M. W., Townsend, D. P., and Zaretsky, E.V.: “Rolling-Element Lubrication with Fluorinated Polyether at Cryogenic Temperature (160o to 410o R), NASA TN D-5566, 1969.
47. Allen, C. W., Townsend, D. P., and Zaretsky, E.V.: “Elastohydrodynamic Lubrication of a Spinning Ball in a Nonconforming Groove,” Trans. ASME, J. Lubr. Tech., Vol. 92, No. 1, 1970, pp. 89-96.
48. Zaretsky, E.V., and Anderson, W.J.: “Effect of Materials – General Background,” Interdisciplinary Approach to the Lubrication of Concentrated Contacts, Ku, P.M., ed., NASA SP-237, 1970, pp. 379-408.
49. Zaretsky, E.V., and Ludwig, L.P.: “Advancements in Bearings, Seals and Lubricants, Aircraft Propulsion,” NASA SP-259, 1970, pp. 421-463.
50. Bamberger, E. N., Zaretsky, E.V., and Anderson, W. J.: “Effect of Three Advanced Lubricants on High-Temperature Bearing Life,” Trans. ASME, J. Lubr. Tech., Vol. 92, No. 1, 1970, pp. 23-33.
51. Townsend, D. P., and Zaretsky, E.V.: “Effects of Antiwear and Extreme Pressure Additives in a Synthetic Paraffinic Lubricant on Ball Spinning Torque,” NASA TN D-5820, 1970.
52. Allen, C. W., and Zaretsky, E.V.: “Microasperity Models for Elastohydrodynamic Lubrication of a Spinning Ball on a Flat Surface,” NASA TN D-6009, 1970.
53. Zaretsky, E.V.: “Antiwear and EP Additive Effects During Rolling and Spinning Contact with a Synthesized Hydrocarbon Oil,” NASA TM X-52391, 1971. (Presented at Conference on Chemical Effects of Bearing Surfaces, Univ. of Swansea, Wales, January 1971.)
54. Dietrich, M. W., Townsend, D. P., and Zaretsky, E.V.: “Effect of Contact Angle on Rolling Element Fatigue Life with at Fluorinated Ether Lubricant at a Cryogenic Temperature of 170K (305oR),” NASA TN D-6367, 1971.
55. Dietrich, M. W., Townsend, D. P., and Zaretsky, E.V.: “Rolling-Element Fatigue and Lubrication with Fluorinated Polyethers at Cryogenic Temperatures,” Trans. ASME, J. Lubr. Tech., Vol. 93, No. 3, 1971, pp. 364-370. (NASA TMX-52863)
56. Bamberger, E. N. and Zaretsky, E.V.: “Fatigue Lives at 600oF of 120-mm Bore Ball Bearings of AISI M-50, AISI M-1, and WB-49 Steels,” NASA TN D-6156, 1971.
57. Parker, R. J., Zaretsky, E.V., and Dietrich, M. W.: “Rolling-Element Fatigue Lives of Four M-Series Steels and AISI 52100 at 150oF,” NASA TN D-6156, 1971.
58. Parker, R. J., Zaretsky, E.V., and Dietrich, M. W.: “Rolling-Element Fatigue Lives of AISI T-1, AISI M-42, AISI 52100 and Halmo at 150oF,” NASA TN D-6169, 1971.
59. Zaretsky, E.V., et al: Life Adjustment Factors for Ball and Roller Bearings, ASME, New York, New York, 1971.
60. Scibbe, H. W., and Zaretsky, E.V.: “Advanced Design Concepts for High-Speed Bearings,” ASME Paper 71-DE-50, 1971.
61. Parker, R. J. and Zaretsky, E.V.: “Rolling-Element Fatigue Lives of Through-Hardened Materials,” Trans. ASME, J. Lubr. Tech., Vol. 44, No. 2, 1972, pp. 165-173.
62. Zaretsky, E.V. and Bamberger, E. N.: “Advanced Airbreathing Engine Lubricants Study with a Tetraester Fluid and a Synthetic Paraffinic Oil at 442K (425oF),” NASA TN D-6771, 1972.
63. Parker, R. J. and Zaretsky, E.V.: “Reevaluation of the Stress-Life Relation in Rolling-Element Bearings,” NASA TN D-6745, 1972.
64. Chevalier, J. L., and Zaretsky, E.V.: “Effect of Carbide Size, Area, and Density on Rolling-Element Fatigue,” NASA TN D-6835, 1972.
65. Parker, R. J. and Zaretsky, E.V.: “Effect of Residual Stresses Induced by Prestressing on Rolling-Element Fatigue Life,” NASA TN D-6995, 1972.
66. Allen, C. W., Townsend, D. P., and Zaretsky, E.V.: “Comparison of Conventional and Microasperity Elastohydrodynamic Lubrication of a Ball Spinning on a Nonconforming Groove,” NASA TN D-6761, 1972.
67. Zaretsky, E. V, et al.: “How to Apply Life Adjustment Factors to Ball and Roller Bearings,” ASME Paper 72-DE-29, 1972.
68. Chevalier, J. L., Dietrich, M. W. and Zaretsky, E.V.: “Short-Term Hot Hardness Characteristics of Rolling-Element Steels,” NASA TN D-6632, 1972.
69. Dietrich, M. W., Parker, R. J., and Zaretsky. E.V.: “Comparative Lubrication Studies of OH-58A Tail Rotor drive Shaft Bearings,” NASA TMX-68118, 1972. Proc., Product Assurance Symposium, Assurance Technologies in Action for RAM and RISE, American Ordinance Association, 1972, pp. 368-394.
70. Parker, R. J. and Zaretsky, E.V.: “Rolling-Element Fatigue Life of Silicon Nitride Balls – Preliminary Test Results,” NASA TMX-68174, 1972.
71. Chevalier, J. L., Zaretsky, E.V., and Parker, R. J.: “A New Criterion for Predicting Rolling-Element Fatigue Lives of Through-Hardened Steels,” Trans. ASME, J. Lubr. Tech., Vol. 95, No. 3, 1973, pp. 287-293.
72. Loewenthal, S. H. and Zaretsky, E.V.: “Elastohydrodynamic Analysis Using a Power Law Pressure-Viscosity Relation,” NASA TN D-7121, 1973.
73. Townsend, D. P., Chevalier, J. L., and Zaretsky, E.V.: “Pitting Fatigue Characteristics of AISI M-50 and Super Nitralloy Spur Gears,” NASA TN D-7261, 1973.
74. Allen, C. W., Townsend, D. P., and Zaretsky, E.V.: “New Generalized Rheological Model for Lubrication of a Ball Spinning in a Nonconforming Grove,” NASA TN D-7280, 1973.
75. Townsend, D. P., Allen, C. W., and Zaretsky, E.V.: “Friction Losses in a Lubricated Thrust Loaded Cageless Angular-Contact Bearing,” NASA TN D-7356, 1973.
76. Parker, R. J., and Zaretsky, E.V.: “Effect of Lubricant Extreme Pressure Additives on Rolling-Element Fatigue Life,” NASA TN D-7383, 1973.
77. Loewenthal, S. H., Parker, R. J., and Zaretsky, E.V.: “Elastohydrodynamic Film Thickness Formula Base on X-Ray Measurements with a Synthetic Paraffinic Oil,” NASA TN D-7502, 1973.
78. Townsend, D.P., and Zaretsky, E.V.: “Effect of Tip Relief of Endurance characteristics of Super Nitralloy (5Ni-2A1) and AISI M-50 Spur Gears,” NASA TN D-7535, 1974.
79. Parker, R. J., and Zaretsky, E.V.: “Rolling-Element Fatigue Life of Silicon Nitride Balls,” NASA TN D-7794, 1974.
80. Loewenthal, S. H., Parker, R. J., and Zaretsky, E.V.: “Correlation of Elastohydrodynamic Film Thickness Measurements for Fluorocarbon, Type II Ester, and Polyphenyl Ether Lubricants,” NASA TN D-7825, 1974.
81. Zaretsky, E.V., Bamberger, E. N., and Signer, H.: “Operating Characteristics of120-mm Bore Ball Bearings at 3×106DN,” NASA TN D-7837, 1974.
82. Parker, R. J., Zaretsky, E.V., and Bamberger, E. N.: “Evaluation of Load-Life Relation with Ball Bearings at 500oF,” Trans. ASME, J. Lubr. Tech., Vol. 96, No. 3, 1974, pp. 391-398.
83. Loewenthal, S. H., Parker, R. J., and Zaretsky, E.V.: “Elastohydrodynamic Film Thickness Model for Heavily Loaded Contacts,” Trans. ASME, J. Lubr. Tech., Vol. 96, No. 3, 1974, pp. 472-481.
84. Signer, H., Bamberger, E. N., and Zaretsky, E.V.: “Parametric Study of the Lubrication of Thrust Loaded 120-mm Bore Ball Bearings to 3 Million DN,” Trans. ASME, J. Lubr. Tech., Vol. 96, No. 3, 1974, pp. 515-526.
85. Townsend, D. P., Allen, C. W., and Zaretsky, E.V.: “Study of Ball Bearing Torque Under Elastohydrodynamic Lubrication,” Trans. ASME, J. Lubr. Tech., Vol. 96, No. 4, 1974, pp. 561-571.
86. Townsend, D.P. and Zaretsky, E.V.: “A Life Study of AISI M-50 and Super Nitralloy Spur Gears with and Without Tip Relief,” Trans. ASME, J. Lubr. Tech., Vol. 96, No. 4, 1974, pp. 583-590.
87. Anderson, W.J. and Zaretsky, E.V.: “Rolling-Element Bearings – A Review of the State-of-the-Art,” Proc., The Tribology Workshop; Ling, F. F.; ed., National Science Foundation, 1974, pp. 233-325.
88. Bamberger, E. N., Zaretsky, E.V., and Signer, H.: “Effect of Speed and Load on Ultra-High-Speed Ball Bearings,” NASA TN D-7870, 1974.
89. Dietrich, M. W. and Zaretsky, E.V.: “Effect of Viscosity on Rolling-Element Fatigue Life at Cryogenic Temperature with Fluorinated Ether Lubricants,” NASA TN D-7953, 1975.
90. R. J. Parker and Zaretsky, E.V.: “Fatigue Life of High-Speed Ball Bearings with Silicon Nitride Balls,” Trans. ASME, J. Lubr. Tech., Vol. 97, No. 3, 1975, pp. 350-357.
91. Townsend, D. P., Bamberger, E. N. and Zaretsky, E.V.: “Comparison of Pitting Fatigue Lives of Ausforged and Standard Forged AISI M-50 Spur Gears with AISI 9310 Gears,” NASA TN D-8030, 1974.
92. Coy, J. J., Townsend, D. P., and Zaretsky, E.V.: “Analysis of Dynamic Capacity of Low-Contact Ratio Spur Gears Using Lundberg-Palmgren Theory,” NASA TN D-8029, 1975.
93. Coy, J. J. and Zaretsky, E.V.: “Life Analysis of Helical Gear Sets Using Lundberg-Palmgren Theory,” NASA TN D-8045, 1975.
94. Anderson, N. E. and Zaretsky, E.V.: “Short Term Hot Hardness Characteristics of Five Case Hardened Steel,” NASA TN D-8031, 1975.
95. Townsend, D. P., Bamberger, E. N., and Zaretsky, E.V.: “A Life Study of Ausforged Standard Forged and Standard Machined AISI M-50 Spur Gears,” Trans. ASME, J. Lubr. Tech., Vol. 98, No. 3, 1976, pp. 418-425.
96. Coy, J. J., Townsend, D.P., and Zaretsky, E.V.: “Dynamic Capacity and Surface Fatigue Life for Spur and Helical Gears,” Trans. ASME, J. Lubr. Tech., Vol. 98, No. 2, 1976, pp. 267-276. (NASA TMX-71743)
97. Zaretsky, E.V., Signer, H., and Bamberger, E. N.: “Operating Limitations of High-Speed Jet-Lubricated Ball Bearings,” Trans. ASME, J. Lubr. Tech., Vol. 98, No. 1, 1976, pp. 32-39.
98. Parker, R. J., Zaretsky, E.V., and Chen, S. M.: “Evaluation of Ball and Roller Bearings Restored by Grinding,” NASA TMX-73440, 1976. Proc., Joint Army-NASA Seminar, Bearing Restoration by Grinding, AVSCOM, St. Louis, Mo., USAAVSCOM-TR-76-27, May 1976, pp. 24-58.
99. Coy, J. J., Loewenthal, S. H., and Zaretsky, E.V.: “Fatigue Life Analysis for Traction Drives with Application to a Toroidal Type Geometry,” NASA TN D-8362, 1976.
100. Bamberger, E. N., Zaretsky, E.V., and Signer, H.: “Endurance and Failure Characteristics of Main-Shaft Jet Engine Bearings at 3X106 DN,” Trans. ASME, J. Lubr. Tech., Vol. 98, No. 4, 1976, pp. 580-585.
101. Coy, J. J., Zaretsky, E.V., and Signer, H.: “Life Analysis of Refurbished and Restored Bearings,” NASA TN D-8486, 1977.
102. Townsend, D.P., Zaretsky, E.V. and Anderson, N. E.: “Comparison of Modified VASCO X-2 with AISI 9310_Preliminary Report,” NASA TMX-73649, April 1977.
103. Townsend, D. P., Coy, J. J., and Zaretsky, E.V.: “Experimental and Analytical Load-Life Relation for AISI 9310 Steel Spur Gears,” Trans. ASME, J. Mech. Design, Vol. 100, No. 1, 1978, pp. 54-60.
104. Coe, H. H. and Zaretsky, E.V.: “Predicted and Experimental Performance of Jet Lubricated 120-mm Bore Ball Bearings to 2.5 Million DN,” NASA TP-1196, May 1978.
105. Parker, R. J. and Zaretsky, E.V.: “Rolling-Element Fatigue Life of AISI M-50 and 18-4-1 Balls,” NASA TP-1202, April 1978.
106. Townsend, D. P., Parker, R. J., and Zaretsky, E.V.: “Evaluation of CBS 600 Carburized Steel as a Gear Material,” NASA TP 1390, January 1979.
107. Zaretsky, E.V., Townsend, D. P., and Coy, J. J.: “NASA Gear Research and Its Probable Effect on Rotorcraft Transmission Design,” NASA TM-79292, 1979. Proc., Specialists’ Mtg. on Helicopter Propulsion Systems, American Helicopter Society, HPS-7, November 1979.
108. Townsend, D. P. and Zaretsky, E.V.: “Comparison of Modified VASCO X-2 and AISI 9310 as Gear Steels,” NASA TP 1731, Nov. 1980.
109. Townsend, D. P. and Zaretsky, E.V.: “Endurance and Failure Characteristics of Modified VASCO X-2, CBS and AISI 9310 Spur Gears,” Trans. ASME, J. Mech. Design, Vol. 103, No. 2, April 1981, pp. 506-515. (NASA TM 81421)
110. Coy, J. J. and Zaretsky, E.V.: “Some Limitations in Applying Classical EHD Film Thickness Formulae to a High-Speed Bearing,” Trans. ASME, J. Lubr. Tech., Vol. 103, No. 2, April 1981, pp. 295-304.
111. Zaretsky, E.V., Parker, R. J., and Anderson, W. J.: “NASA Five-Ball Fatigue Tester – Over 20 Years of Research,” Rolling Contact Fatigue Testing of Bearing Steels, J. J. C. Hoo, ed., ASTM STP 771, 1982, pp. 5-45. (Presented in Phoenix, Arizona, May 1981.)
112. Zaretsky, E.V.: “Advances in High-Speed Rolling-Element Bearings,” Proc. Sixteenth Israel Conference of Mechanical Engineering, 1982, Israel Journal of Technology, Vol. 20, 1982, pp. 3-16 (NASA TM 82910) (Presented at Israel Mechanical Engineers Conference, Haifa, Israel, July 1982.)
113. Townsend, D. P., and Zaretsky, E.V.: “Effects of Shot Peening on Surface Fatigue Life on Carburized and Hardened AISI 9310 Spur Gears,” NASA TP 2047, August 1982.
114. Zaretsky, E.V.: “Development of High-Speed Rolling-Element Bearings _-A Historical and Technical Perspective,” SKF Technical Forum, SKF Publication 3318E, Nieuwegan, Netherlands, 1983, pp. 42-53 (NASA TM 82884). (Presented at the SKF Seventy-Fifth Anniversary Celebration Meeting, Nieuwegan, Netherlands, June, 1982.)
115. Zaretsky, E.V., Coy, J. J., and Townsend, D. P.: “NASA Transmission Research and Its Probable Effects on Helicopter Transmission Design,” NASA TM 83389, 1983. (Presented at the Thirty-Ninth Annual Forum of the American Helicopter Society, St. Louis, Missouri, May 9-11, 1983.)
116. Litvin, F. L., Goldrich, R. N., Coy, J. J., and Zaretsky, E.V.: “Precision of Spiral Bevel Gears’,” Trans. ASME, J. Mech. Design, Vol. 105, No. 3, 1983, pp. 310-316. (NASA TM 82887)
117. Litvin, F. L., Goldrich, R. N., Coy, J. J., and Zaretsky, E.V.: “Kinematic Precision of Gear Trains,” Trans. ASME, J. Mech. Design, Vol. 105, No. 3, 1983, pp. 317-326. (NASA TM 83888).
118. Zaretsky, E.V.: “NASA Transmission System Technology Program,” Advanced Power Transmission Technology, G. K. Fischer, ed., NASA CP-2210, 1983, pp. 15-33.
119. Coy, J. J., Townsend, D. P., and Zaretsky, E.V.: “An Update on the Life Analysis of Spur Gears,” Advanced Power Transmission Technology, G. K. Fischer, ed., NASA CP-2210, 1983, pp. 421-433.
120. Loewenthal, S. H., and Zaretsky, E.V.: “Traction Drives,” Section 34, Mechanical Design and Systems Handbook, H.A. Rothbart, ed., 2nd Edition, McGraw_Hill Book Company, 1985, pp. 34.l-34.56 (NASA RP ll54).
121. Coy, J. J., Townsend, D. P., and Zaretsky, E.V.: “Gearing,” Section 38, Mechanical Design and Systems Handbook, Rothbart, H.A., ed., 2nd Edition, McGraw-Hill Book Company, 1985, pp. 38.l-38.89. (NASA RP ll52) (Republished Mechanical Design Handbook, Rothbart, H.A., ed., McGraw-Hill Book Company, 1996, pp. 27.l-38.96.)
122. Townsend, D. P., and Zaretsky, E.V.: “Effect of Five Lubricants on the Life of AISI 9310 Spur Gears,” NASA TP 24l9, Jan. l985.
123. Coe, H. H., and Zaretsky, E.V.: “Effect of Speed and Press Fits on Fatigue Life of Roller Bearing Inner-Race Contact,” NASA TP 2496, July l985.
124. Loewenthal, S. H., Parker, R. J., Zaretsky, E. V., and Scibbe, H. W.: “Operating Characteristics of a 0.87 kW-hr Flywheel Energy Storage Module,” Proc., 20th Intersociety Energy Conversion Engineering Conf., l985, pp. l64-l74. (also SAE Paper 8590l8, Aug. l985)
125. Zaretsky, E. V.: “Design and Lubrication of High-Speed Rolling-Element Bearings,” NASA TM 87l07, l985. (Presented at Original Equipment Manufacturing Design Conference, Philadelphia, PA., Sept. 9-ll, l985.)
126. Zaretsky, E. V., Schuller, F. T., and Coe, H. H.: “Lubrication and Performance of High-Speed Rolling-Element Bearings,” Lubrication Engr., Vol. 4l, No. 2, Dec. l985, pp. 725-732. (NASA TM 86958)
127. Townsend, D. P., Zaretsky, E.V., and Scibbe, H. W.: “Lubricant and Additive Effects on Spur Gear Surface Fatigue Life,” Trans. ASME, J. Tribology, Vol. l08, No. 3, July l986, pp. 468-477. (NASA TM 87044)
128. Zaretsky, E. V.: “Lubricant Effects on Bearing Life,” Proc. OEM Design ‘86 Conference, N.Y., N.Y., Dec. 9-ll, l986. (NASA TM 88875)
129. Zaretsky, E. V.: “Fatigue Criterion to System Design, Life, and Reliability,” Trans. AIAA, J. Propulsion and Power. Vol. 3, No. l, Jan.-Feb., l987, pp. 76-83. (NASA TM 870l) (Presented at AIAA, SAE and ASME Twenty-first Joint Prop. Conf., Monterey, CA, July 8-l0, l985.)
130. Coe, H. H. and Zaretsky, E. V.: “Effect of Interference Fits on Roller Bearing Fatigue Life,” ASLE Trans., Vol. 30, No. 2, Apr. l987, pp. l3l-l40.
131. Zaretsky, E. V.: “Effects of Surface Removal on Rolling-Element Fatigue,” Proc. International Conference on Tribology, Lubrication and Wear; 50 Year On, IMechE, London, England, July l-3, l987, pp. 829-838. (NASA TM 88871)
132. Zaretsky, E. V.: “Selection of Rolling-Element Bearing Steels for Long-Life Application,” Effect of Steel Manufacturing Processes on the Quality of Bearing Steels, J. J. C. Hoo, ed., ASTM STP 987, l988, pp. 5-43. (Presented in Phoenix, Arizona, Nov. 4-6, l986.) (NASA TM 8888l)
133. Zaretsky, E. V.: “Ceramic Bearings for Use in Gas Turbine Engines,” Trans. ASME, J. Engr. for Gas Turbines and Power, Vol. 111, No. 1, 1989, pp. 146-157. (NASA TM 100288) (Presented in Gas Turbine and Aeroengine Congress and Exposition, Amsterdam, The Netherlands, June 5-9, l988.)
134. Zaretsky, E. V., Smith, T. E., and August, R.: “Life and Reliability of Rotating Disks,” Proc. Lewis Structures Technology – l988, Vol. 3, NASA CP 3003, 1988 pp. 3-27l – 3-284
135. Zaretsky, E. V., Smith, T. E., and August, R.: “Effect of Design Variables, Temperature Gradients and Speed on Life and Reliability of a Rotating Disk,” Trans. ASME, J. Vibr., Acoustics, Stress & Reliability in Design, Vol. 111, No. 3, 1989, pp. 311-317. (NASA TM 88883) (Presented in Honolulu, Hawaii, March 22-27, 1987.)
136. Zaretsky, E. V.: “Bearing and Gear Steels for Aerospace Applications,” Advanced Materials in Aerospace Applications, ASM International, 1990, pp. AIV 1-15.
137. Zaretsky, E. V.: “Bearing Elastodhydrodynamic Lubrication: A Complex Calculation Made Simple,” Power Transmission Design, Vol. 32, No. 6, Penton Publ., June 1990, pp. 30-35. (also NASA TM 102575)
138. Zaretsky, E. V.: “Liquid Lubrication in Space,” Tribology International, Vol. 23, No. 2, Butterworth Press, April 1990, pp. 74-93. (NASA RP 1240)
139. Zaretsky, E. V. and August, R.: “Closed Form Solution for Hoop Stress in a Ball-Race Contact,” Advanced Earth-to-Orbit Prop. Tech., R. J. Richmond and S. T. Wu, eds., Vol. 2, NASA CP-3092, 1990, pp. 387-399. (Presented in Huntsville, Alabama, May 15-17, 1990, 1990 Conference on Advanced Earth-to-Orbit Prop. Tech.)
140. Holland, F. A., Jr. and Zaretsky, E. V.: “Investigation of Weibull Statistics in Fracture Analysis of Cast Aluminum,” Trans. ASME, J. Mechanical Design, Vol. 112, No. 3, June 1990, pp. 246-254. (NASA TM 102000)
141. Needelman, W. M. and Zaretsky, E. V.: “New Equations Show Oil Filtration Effect on Bearing Life,” Power Transmission Design, Vol. 33, No. 8, Penton Publ., 1991, pp. 65-68.
142. Zaretsky, E. V., ed, STLE Life Factors for Rolling Bearings, STLE SP-34, STLE, Park Ridge, IL., 1992.
143. Moyer, C. A., and Zaretsky, E. V.: “Failure Modes Related to Bearing Life,” Chap. 2, STLE Life Factors for Rolling Bearings, Zaretsky, E. V., ed, STLE SP-34, STLE, Park Ridge, IL., 1992, pp. 47-69.
144. Anderson, W. J., Bamberger, E. N., Poole, W. E., Thom, R. L., and Zaretsky,E. V.: “Materials and Processing,” Chap. 3, STLE Life Factors for Rolling Bearings, Zaretsky, E. V., ed, STLE SP-34, STLE, Park Ridge, IL., 1992, pp. 71-128.
145. Boness, R. J., Coe, H. H., McKenzie, M. R., Moyer, C. A., Poplawski, J. V., Rumbarger, J. H., and Zaretsky, E. V.: “Bearing Load,” Chap. 4, STLE Life Factors for Rolling Bearings, Zaretsky, E. V., ed, STLE SP-34, STLE, Park Ridge, IL., 1992, pp. 129-181.
146. Chetta, G. E., Hosang, G. W., Needelman, W. M., Kannel, J. W., and Zaretsky,E. V.: “Lubrication,” Chap. 5, STLE Life Factors for Rolling Bearings, Zaretsky, E. V., ed, STLE SP-34, STLE, Park Ridge, IL., 1992, pp. 183-231.
147. Zaretsky, E. V., “Application of Life Factors,” Chap. 6, STLE Life Factors for Rolling Bearings, E. V. Zaretsky, ed, STLE SP-34, STLE, Park Ridge, IL., 1992, pp. 233-298.
148. Zaretsky, E. V.: “Fatigue Criterion to System Design, Life and Reliability – A Primer,” NASA TM 106022, 1992. (Presented at Workshop on Computational Methods for Failure Analysis and Life Prediction, Hampton, VA, October 14 – 15, 1992)
149. August, R., and Zaretsky, E. V.: “Incorporating Finite Element Analysis into Component Life and Reliability,” Trans. ASME, J. Mechanical Design, Vol. 115, No. 4, Dec. 1993, pp. 706-710.
150. Zaretsky, E. V.: “Modeling the Future with Metal-Matrix Composites,” Machine Design, Vol. 66, No. 5, March 7, 1994, pp. 124-132.
151. Zaretsky, E. V.: “Design for Life, Plan for Death,” Machine Design, Vol. 66, No.15, Aug. 8, 1994, pp. 55-59.
152 Holland, F. A. and Zaretsky, E. V.: “Comparison of Weibull Strength Parameters from Flexure and Spin Tests of Brittle Materials,” Trans. ASME, J. Mechanical Design, Vol. 116, No .4, Dec. 1994, pp. 973-979.
153. Zaretsky, E. V.: “New Life Factors Zero-In on Accurate Bearing Life Predictions,” Power Transmission Design, Penton Publ., Mar. 1996, pp. 45-48.
154. Zaretsky, E. V., ed.: MMC Life System Development (Phase I)-A NASA/Pratt & Whitney Life Prediction Cooperative Program, NASA RP 1361, Nov. 1996.
155. Zaretsky, E. V., and deLaneuville, R. E.: “Overview of MMC Life System Development (Phase I), Chap. 1, MMC Life System Development (Phase I)-A NASA/Pratt & Whitney Life Prediction Cooperative Program, NASA RP 1361, Nov. 1996, pp.1-13.
156. Holland, F. A., Jr., Zaretsky, E. V., and Melis, M.E.: “Probabilistic Failure Prediction of SCS-6/Ti-15-3 MMC Ring, Chap. 7, MMC Life System Development (Phase I)-A NASA/Pratt & Whitney Life Prediction Cooperative Program, NASA RP 1361, Nov. 1996, pp. 75-84. (also published in Trans. ASME, J. Mechanical Design, Vol. 140, No. 4, Dec. 1998, pp. 714-720.)
157. Zaretsky, E. V., Poplawski, J. V., and Peters, S. M.: “Comparison of Life Theories for Rolling-Element Bearings,” STLE Tribology Transactions, Vol. 39, No. 2, 1996, pp.237-248, 501-503. (also NASA TM 106585)
158. Zaretsky, E. V., Coe, H. H., and August, R.: “Effect of Hoop Stress on Ball Bearing Life Prediction,” STLE Tribology Transactions, Vol. 40, No. 1, 1997, pp. 91-101.
159. Zaretsky, E. V., ed., Tribology for Aerospace Applications, STLE, Park Ridge, IL., 1997.
160. Loomis, W. R., Fusaro, R. L., and Zaretsky, E. V.: “Liquid Lubricants,” Chap. 4, Tribology for Aerospace Applications, E. V. Zaretsky, ed., STLE, Park Ridge, IL., 1997, pp. 137-168.
161 Zaretsky, E. V.: “Rolling Bearing and Gear Lubrication,” Chap. 6, Tribology for Aerospace Applications, E. V. Zaretsky, ed., STLE, Park Ridge, IL., 1997, pp. 207-324.
162. Zaretsky, E. V.: “Rolling Bearing and Gear Materials,” Chap. 7, Tribology for Aerospace Applications, E. V. Zaretsky, ed., STLE, Park Ridge, IL., 1997, pp. 325-451.
163. Zaretsky, E. V.: “A. Palmgren Revisited – A Basis for Bearing Life Prediction,” Lubrication Engineering, Jour. STLE, Vol. 54, No. 2, Feb., 1998, pp. 18 – 24. (Presented at 52nd STLE Annual Meeting, Kansas City, MO, May 18 –22, 1997)(also NASA TM 107440)
164. Zaretsky, E. V.: “An Overview – NASA LeRC Structures Programs,” NASA TM – 1998 –206237, March 1998. (Presented at Workshop on National Structures Programs jointly sponsored by AIAA Structures Technical Committee, University of Virginia’s for Advanced Computational Technology, and NASA, Kissimmee, FL, April 6, 1997)
165. Pinel, S. I., Signer, H. R., and Zaretsky, E. V.: “Design and Operating Characteristics of High-Speed, Small-Bore Ball Bearings,” STLE Tribology Trans, Vol. 41, No. 4, 1998, pp. 423- 434. (Presented at 1997 International Tribology Conference and Exposition, London, Great Britain, Sept. 9 –12, 1997; 53rd STLE Annual Meeting, Detroit, MI., May 17 –20, 1998) (also NASA/TM-1998-206981)
166. Zaretsky, E. V.: “Quest for the 3 Million DN Bearing – A History,” Technical Review, No. 67, NTN, Osaka, Japan, Nov. 1998, pp. 7 –19.
167. Melis, M. E., Zaretsky, E. V., and August, R.: “Probabilistic Analysis of Aircraft Gas Turbine Disk Life and Reliability” Jour. of Propulsion and Power, Trans. AIAA, Vol. 15, No. 5, Sept. – Oct., 1999. (Presented at 1997 AIAA Structures, Dynamics and Materials Conference, Orlando, FL, April 7 – 11, 1997) (also NASA/TM-1999-107436)
168. Zaretsky, E. V., Poplawski, J. V., and Miller, C. R.: “Rolling Bearing Life Prediction – Past, Present, and Future,” in Proc. of the International Tribology Conf. Nagasaki, 2000, Vol. 1, Japanese Society of Tribologists, Tokyo, Japan, 2001, pp. 101 –107. (Presented at International Tribology Conference Nagasaki, 2000, Nagasaki, Japan, Oct. 29 – Nov. 2, 2000) (also NASA/TM – 2000-210529)
169. Hendricks, R. C., and Zaretsky, E. V.: “Design of Critical Components” in Proc. of 2000 NASA Seal/Secondary Air System Workshop, Cleveland, OH, Oct. 25 -26, 2000, NASA CP-2001-211208, 2001, pp. 29 – 32.
170. Pinel, S. I., Signer, H. R., and Zaretsky, E. V.: “Design and Operating Characteristics of High-Speed, Small-Bore Cylindrical Roller Bearings,” STLE Tribology Trans, Vol. 44, No. 1, 2001, pp. 70 – 78. (Presented at 55th STLE Annual Meeting, Nashville, TN, May 7 –11, 2000) (also NASA/TM – 2000-209778)
171. Pinel, S. I., Signer, H. R., and Zaretsky, E. V.: “Comparison Between Oil-Mist and Oil-Jet Lubrication of High-Speed, Small Bore, Angular-Contact Ball Bearings,” STLE Tribology Trans., Vol. 44, No. 3, 2001, pp. 327-338. (Presented at 56th STLE Annual Meeting, Orlando, FL, May 20 –21, 2001) (also NASA/TM—2001-210462)
172. Poplawski, J. V., Zaretsky, E. V., and Peters, S. M.: “Effect of Roller Profile on Cylindrical Roller Bearing Life Prediction – Part I: Comparison of Bearing Life Theories,” STLE Tribology Trans., Vol. 44, No. 3, 2001, pp. 339 – 350. (Presented at 55th STLE Annual Meeting, Nashville, TN, May 7 –11, 2000) (also NASA/TM – 2000-210368)
173. Poplawski, J. V., Zaretsky, E. V., and Peters, S. M.: “Effect of Roller Profile on Cylindrical Roller Bearing Life Prediction – Part II: Comparison of Roller Profiles,” STLE Tribology Trans., Vol. 44, No. 3, 2001, pp. 417 – 427. (Presented at 55th STLE Annual Meeting, Nashville, TN, May 7 –11, 2000) (also NASA/TM – 2000-210368)
174. Zaretsky, E. V., Hendricks, R. C., and Soditus, S.: “Weibull-Based Design Methodology for Rotating Aircraft Engine Structures,” International Jour. Rotating Machinery, Vol. 9, pp. 313-325, 2003 (also in Proc. of the Ninth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-9), Honolulu, Hawaii, Paper No. DD-ABS-082 (Presented Feb. 10-14, 2002) (also NASA/TM—2002-211348)
175. Vlcek, B. L., Hendricks, R. C., and Zaretsky, E. V.: “Predictive Failure of Cylindrical Coatings Using Weibull Analysis,” ,” in Proc. of the Ninth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-9),Honolulu, Hawaii, Paper No. DD-ABS-082 (Presented Feb. 10-14, 2002) (also NASA/TM—2002-211348)
176. Vlcek, B. L., Hendricks, R. C., Zaretsky, E. V, and Savage, M.: “Comparative Fatigue Lives of Rubber and PVC Wiper Cylindrical Coatings,” STLE Tribology Trans., Vol. 46, No. 1, 2003 (Presented at 57th STLE Annual Meeting, Houston, Texas, May 19-23, 2002) (also NASA/TM – 2002 – 211819)
177. Zaretsky, E. V., Hendricks, R. C., and Soditus, S. M.: “Effect of Individual Component Life Distribution on Engine Life Prediction,” Symposium on the Probabilistic Aspects of Life Prediction, ASTM STP 1450, W. S. Johnson and B. M. Hillberry, Eds., ASTM International, West Conshohocken, PA (Paper presented Nov. 6-7, 2002, Miami Beach, Florida) (also NASA/TM–2003-212532)
178. Vlcek, B. L., Hendricks, R. C., and Zaretsky, E. V.: “Determination of Rolling-Element Fatigue Life from Computer Generated Bearing Tests,” STLE Tribology Trans., Vol. 46, No. 3, 2003, pp. 479 – 493 (Presented at 58th STLE Annual Meeting, New York City, New York, April28 – May 1, 2003) (also NASA/TM—2003-212186)
179. Hendricks, R. C., Steinetz, B. M., Zaretsky, E. V., Athavale, M. M. Athavale, A. J.: “Reviewing Turbomachinery Sealing and Secondary Flows,Part C: Powerstream Component Support Issues,” Proc. International Symposiumon Stability Control of Rotating Machinery, 2003, pp. 67-91 (Presented at ISCORMA-2, Gdansk, Poland, Aug. 4-8, 2003) (also NASA/ TM – 2004-211991/PART3)
180. Vlcek, B. L., Hendricks, R. C., and Zaretsky, E. V.: “Monte Carlo Simulation of Sudden Death Bearing Testing,” STLE Tribology Trans., Vol. 47, No. 2, 2004, pp. 188-199. (Presented at STLE/ASME Tribology Conference, Ponte Vedra Beach, Florida, Oct. 26-29, 2003) (also NASA/TM—2003-212506)
181. Zaretsky, E. V., and Branzai, E. V.: “Effect of Rolling Bearing Refurbishment and Restoration on Bearing Life and Reliability,” STLE Tribology Trans., Vol. 48, No. 1, 2005, pp. 32-44. (Presented at 59th STLE Annual Meeting, Toronto, Canada, May 17-20, 2004) (also NASA/TM – 2005-212966)
182. Zaretsky, E. V., Vlcek, B. L., and Hendricks, R. C.: “Effect of Silicon Nitride Balls and Rollers on Rolling Bearing Life,” STLE Tribology Trans., Vol. 48, No. 3, 2005, pp. 425-435. (Presented at 60th STLE Annual Meeting, Las Vegas, Nevada, May 15-19, 2005) (also NASA/TM – 2005-212966)
183. Zaretsky, E. V. “Effects of Design and Operating Variables on Bearing Life and Reliability – A Sensitivity Study,” International Symposium – 2005 on “Reliability Data Bank for Mechanical Materials and Components – Part 2, Meiji University Academic Frontier, 2005, Japan (Presented June 3, 2005, Meiji University, Institute of Science and Technology)
184. Zaretsky, E. V., Poplawski, J. V., and Root, L. E., Re-Examination of Ball-Race Conformity Effects on Ball Bearing Life, (Paper presented at STLE 60th Annual Meeting, May 15 – 19, 2005, Las Vegas, NV) (Paper submitted to Tribology Transactions and proposed NASA TM)
185. Zaretsky, E. V., Lewicki, D. G., Savage, M., and Vlcek, B. L., “Determination of Turboprop Reduction Gearbox System Fatigue Life and Reliability from Computer Generated Tests,” Paper No. WTC2005-63187 (Paper presented at World Tribology Congress III, Sept. 12-16, 2005, Washington, DC) (Paper submitted to Tribology Transactions and proposed NASA TM)
186. Vlcek, B. L., Hendricks, R. C., Zaretsky, E. V., and Parker, J. “Experimental Determination of Fatigue Lives of Rotating Aluminum Alloys using Weibull Analysis,” Paper No. 125-ISROMAC-11, Proc. ISROMAC-11. (Paper presented at 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, Feb. 26 – Mar. 2, 2006). (Paper to be submitted for technical society journal publication and proposed NASA TM)
187. Zaretsky, E. V., Poplawski, J. V., and Root, L. E., “Relation between Hertz Stress – Life Exponent, Ball-Race Conformity and Ball bearing Life,” (Paper presented to STLE 61st Annual Meeting, May 11 – 12, 2006, Calgary, Canada) ) (Paper submitted to Tribology Transactions and proposed NASA TM)
188. Zaretsky, E. V., “Design of Oil Lubricated Machine Components for Life and Reliability,” Invited paper to be presented at 7th International Symposium INSYCONT 2006, “New Achievements in Tribology” ENERGY AND ENVIROMENTAL ASPECTS OF TRIBOLOGY, Polish Society of Tribology and University of Science and Technology, Cracow, Poland, Sept. 14 – 16, 2006. (Proposed NASA TM, 2006)
189. Zaretsky, E. V. and Branzai, E. V., “Model Specification for Rework of Aircraft Engine, Power Transmission, and Accessory/Auxiliary Ball and Roller Bearings,” (Proposed NASA RP, 2006) (Status: Submitted for final FAA review.)
