| Year |
Reference |
| 1958 |
R.C. Hendricks, R.C. Ehlers, J.C. Humphrey, “Evaluation of Three Injectors in a 2400-Pound-Thrust Rocket Engine Using Liquid Oxygen and Liquid Ammonia,” NACA RM-E-58B25. |
| 1959 |
R.C. Hendricks, R.C., Ehlers, R.W. Graham, “Evaluation of Injector Principles in a 2400-Pound-Thrust Rocket Engine Using Liquid Oxygen and Liquid Ammonia,” NASA Memo 12-11-58E, January 1959. |
| 1960 |
R.W. Graham, R.C. Hendricks, Y.Y. Hsu, R. Friedman, “Experimental Heat Transfer and Pressure Drop of Film Boiling Liquid Hydrogen Flowing Through a Heated Tube, “ Advances in Cryogenic Engineering, 1960, vol. 6, paper H–4, pp. 517–524. |
| 1961 |
R.C. Hendricks, R.W. Graham, Y.Y. Hsu, A.A. Medieros, “Correlation of Hydrogen Heat Transfer in Boiling and Supercritical Pressure States,” the Propellants, Combustion and Liquid Rockets Conference, American Rocket Society, Palm Beach, FL, April 26–28, 1961, E-1248. |
| 1961 |
R.C. Hendricks, R.W. Graham, Y.Y. Hsu, R. Friedman, “Experimental Heat Transfer and Pressure Drop of Liquid Hydrogen Flowing Through a Heated Tube,” May 1961, NASA TND–765, E-976. |
| 1962 |
R.C. Hendricks, R.W. Graham, Y.Y. Hsu, A. Medeiros, “Correlation of Hydrogen Heat Transfer in Boiling and Supercritical Pressure States,” ARS Journal, February 1962, vol. 32, no. 2, pp. 244–252. |
| 1963 |
R.C. Hendricks, F. Simon, “Heat Transfer to Hydrogen Flowing in a Curved Tube,” ASME Multi-Phase Flow Symposium Winter Annual Meeting, Philadelphia, PA, November 1963, NASA TM-50302, E-2270. (Draft.) |
| 1963 |
R.C. Hendricks, R.W. Graham, “A Study of the Effect of Multi-G Accelerations on Nucleate-Boiling Ebullition,” May 1963, NASA TN D-1196, E-1467. |
| 1964 |
R.J. Simoneau, R.C. Hendricks, “A Simple Equation for Correlating Turbulent Heat Transfer to a Gas,” ASME Paper 64–HT–36, AIChE-ASME Heat Transfer Conference and Products Show, Cleveland, OH, August 9–12, 1964. |
| 1964 |
R.C. Hendricks, R.W. Graham, R.C. Ehlers, “An Experimental Study of the Pool Heating of Liquid Hydrogen in the Subcritical and Supercritical Pressure Regimes Over a Range of Accelerations,” Cryogenic Engineering Conference, University of Pennsylvania, Philadelphia, PA, August 17–21, 1964. |
| 1964 |
R.J. Simoneau, R.C. Hendricks, “A Simple Equation for Correlating Turbulent Heat Transfer to a Gas,” AIChE-ASME Heat Transfer Conference and Products Show, Cleveland, OH, August 9–12, 1964, NASA TM X-52011, E-2510. |
| 1964 |
R.C. Hendricks, R.W. Graham, R.C. Ehlers, “An Experimental Study of the Pool Heating of Liquid Hydrogen in the Subcritical and Supercritical Pressure Regimes Over a Range of Accelerations,” Cryogenic Engineering Conference, University of Pennsylvania, Philadelphia, PA, August 17–21, 1964, NASA TM X-52039, E-1985. |
| 1964 |
R.C. Hendricks, R.R. Sharp, “Initiation of Cooling Due to Bubble Growth on a Heating Surface,” NASA TN D-2230, April 1964. |
| 1964 |
R.C. Hendricks, J.A. Schlumberger-Carlile, M.P. Proctor, M.J. Braun, “Brush Seals,” Tony-2, Tech Brief 2, (truncated version.) |
| 1965 |
R.C. Hendricks, Y.Y. Hsu, “Analysis of Near-Critical Hydrogen Heat Transfer Data,” E-2451. (Draft.) |
| 1965 |
R.W. Graham, R.C. Hendricks, R.C. Ehlers, “Analytical and Experimental Study of Pool Heating of Liquid Hydrogen Over a Range of Accelerations,” February 1965, NASA TN D-1883, E-1985. (Technical Film Supplement C-224 available on request.) |
| 1965 |
R.C. Hendricks, R.J. Simoneau, R. Friedman, “Heat-Transfer Characteristics of Cryogenic Hydrogen From 1000 to 2500 PSIA Flowing Upward in Uniformly Heated Straight Tubes,” September 1965, NASA TN D-2977, E-3035. |
| 1966 |
R.C. Hendricks, R.W. Graham, Y.Y. Hsu, R. Friedman, “Experimental Heat-Transfer Results for Cryogenic Hydrogen Flowing in Tubes at Subcritical and Supercritical Pressures to 800 Pounds per Square Inch Absolute,” March 1966, NASA TN D-3095, E-2451. |
| 1966 |
K.J. Baumeister, R.C. Hendricks, T.D. Hamill, “Metastable Leidenfrost States” , NASA TN D-3226, E-3320. (Technical Film Supplement C-244 available on request.) |
| 1967 |
R.W. Graham, R.C. Hendricks, “Assessment of Convection, Conduction, and Evaporation in Nucleate Boiling,” May 1967, NASA TN D- 3943, E-3226. (Motion Picture C-252 available on request.) |
| 1967 |
Y.-Y. Hsu, G.R. Cowgill, R.C. Hendricks, “Mist-Flow Heat Transfer Using Single-Phase Variable-Property Approach,” December 1967, NASA TN D-4149, E-3576. |
| 1968 |
R.C. Hendricks, K.J. Baumeister, “Lighting in Cryogenic and Noncryogenic Fluids,” December 1968, NASA TM X-1654, E-4487. (Film Supplement C-260 available on request.) |
| 1969 |
R.C. Hendricks, R.J. Simoneau, R.V. Smith, “Survey of Heat Transfer to Near-Critical Fluids,” 1969 Cryogenic Eng. Conf., Los Angeles, CA, paper G-1, Advances in Cryogenic Engineering, vol. 15, pp. 197–237. |
| 1969 |
R.C. Hendricks, K.J. Baumeister, “Film Boiling From Submerged Spheres,” NASA TN D-5124, E-4478. (Film Supplement C-263 available on request.) |
| 1970 |
R.C. Hendricks, K.J. Baumeister, “Similarity and Curvature Effects in Pool Film Boiling,” reprint, 4th Intl Heat Transfer Conference, Versailles, France, September 1970, Elsevier Publishing Company |
| 1970 |
R.C. Hendricks, “Film Boiling Transition Temperature for Tissue Cooled with Liquid Nitrogen,” ASME Winter Meeting, November 29–December 3, 1970, New York, NY, 70-WA/HT-16. |
| 1970 |
R.C. Hendricks, “Similarity and Curvature Effects in Pool Film Boiling With Emphasis on Small Spheres,” rough draft of Technical Note which was never published, contains hand drawn figures not contained in that paper, E-5112. |
| 1970 |
R.W. Graham, R.C. Hendricks, R.J. Simoneau, “A Survey of Heat Transfer to Low Temperature Fluids,” Seminar Proceedings—Space Institute, University of Tennessee, January 1970, K.D. Frost, Editor. |
| 1970 |
R.C. Hendricks, K.J. Baumeister, “ Similarity and Curvature Effects in Pool Film Boiling With Emphaisis on Small Spheres,” proposed for presentation at Fourth International Heat Transfer Conference, Versailles, Paris. France, August 31–September 5, 1970, NASA TM X-52652, E-5112. |
| 1970 |
R.C. Hendricks, K.J. Baumeister, “Liquid or Solid on Liquid in Leidenfrost Film Boiling,” Cryogenic Engineering Conference, Boulder, Colorado, June 17–19, 1970, NASA TM X-52783, E-4109. (See also Advances in Cryogenic Engineering, K.D. Timmerhaus, Ed.) |
| 1970 |
R.C. Hendricks, S.A. Ohm, “Critical Levitation LOCII for Spheres on Cryogenic Fluids,” 1970 Cryogenic Engineering Conference, Boulder, CO, June 17–19, 1970. NASA TM X-52804. (See Advances in Cryogenic Engineering, K.K. Timmerhaus, Editor.) |
| 1970 |
K.J. Pew, R.C. Hendricks, R.J. Simoneau, “NTWO—A Nitrogen Properties Package,” 1970 Cryogenic Engineering Conference, Boulder, CO, June 17–19, 1970. NASA TM X-52814. (See Advances in Cryogenic Engineering, K.K. Timmerhaus, Editor.) |
| 1970 |
R.C. Hendricks, “Film Boiling Transition Temperature for Tissue Cooled with Liquid Nitrogen,” Presented at ASME Winter Annual Meeting, NY, November 29-December 3, 1970, NASA TM X-52878, E-5871. |
| 1970 |
R.C. Hendricks, K.J. Baumeister, “Heat Transfer and Levitation of a Sphere in Leidenfrost Boiling,” TN D-5694, E-4109. |
| 1970 |
R.C. Hendricks, R.J. Simoneau, R.V. Smith, “Survey of Heat Transfer to Near-Critical Fluids,” TN D- 5886, E-5084. |
| 1971 |
R.C. Hendricks, A. Baron, “Prediction of the Thermal Conductivity Anomaly of Simple Substances in the Critical Region,” 12th National Heat Transfer Conference, Tulsa, OK, August 15–18, 1971, Paper 71-HT-28 |
| 1971 |
R.C. Hendricks, S.A. Ohm, “Liquid/Solid on Evaporative Fluid Metastable Leidenfrost States,“ proposed for presentation at the 13th International Congress of Refrigeration, National Academy of Sciences–National Research Council, Washington, DC, August 27-September 3, 1971, TM X-67897, E-6505. |
| 1971 |
R.C. Hendricks, S.A. Ohm, “Liquid/Solid on Evaporative Fluid Metastable Leidenfrost States, “13th International Congress of Refrigeration, National Academy of Sciences–National Research Council, Washington, DC, August 27–September 3, 1971, paper 1.27. |
| 1971 |
R.C. Hendricks, “Film Boiling From Spheres—A Comparison of Theory and Data at Standard and Reduced Gravity,” NASA TM X-2344, corrected copy, August 1971. |
| 1971 |
R.C. Hendricks, A. Baron, “Prediction of the Thermal Conductivity Anomaly of Simple Substances in the Critical Region,” 12th National Heat Transfer Conference, Tulsa, OK, August 15–18, 1971, NASA TM X-52955. |
| 1971 |
R.J. Simoneau, R.E. Henry, R.C. Hendricks, R. Watterson, “Two-Phase Critical Discharge of High Pressure Liquid Nitrogen,” 13th International Congress of Refrigeration, Washington, DC, August 27–September 3, 1971, NASA TM X-67863. (See also Proceedings of the XII Congress of Refrigeration—Commission I, Paper 1.42.) |
| 1971 |
R.C. Hendricks, A. Baron, I. Peller, K.J. Pew, “GASP—A Computer Code for Calculating the Thermodynamic and Transport Properties for Eight Fluids—Helium, Methane, Neon, Nitrogen, Carbon Monoxide, Oxygen, Argon, Carbon Dioxide,” 13th International Congress of Refrigeration, Washington, DC, August 27–September 3, 1964, National Academy of Science and National Research Council, NASA TM X-67895. (See also Proceedings of XIII Congress, paper 1.46.) |
| 1972 |
R.C. Hendricks, “Construction of Polysphere Interfaces,” Open Forum Presentation with Handouts and Motion Picture Film, ASME Winter Annual Meeting, NY, 1972. |
| 1972 |
R.C. Hendricks, R.J. Simoneau, R.C. Ehlers, “Choked Flow of Fluid Nitrogen with Emphasis on the Thermodynamic Critical Region,” NASA TM X-68107. |
| 1972 |
R.C. Hendricks, I.C. Peller, A.K. Baron, “Joule-Thomson Inversion Curves and Related Coefficients for Several Simple Fluids,” NASA TN D-6807. |
| 1973 |
R.C. Hendricks, R.J. Simoneau, Y.Y. Hsu, “A Visual Study of Radial Inward Choked Flow of Liquid Nitrogen,” different version of paper 27 of the Cryogenic Engineering Conf, Atlanta, GA, August 8–10,1973. |
| 1973 |
R.C. Hendricks, R.J. Simoneau, Y.Y. Hsu, “A Visual Study of Radial Inward Choked Flow of Liquid Nitrogen,” Cryogenic Engineering Conference, Georgia Institute of Technology, August 8–10, 1973, Advances in Cryogenic Engineering, K.D. Timmerhaus, Editor. vol. 20, paper J-2, pp. 370–382. |
| 1973 |
R.C. Hendricks, “Visual Study of Radial Inward Choked Flow of Liquid Nitrogen,” NASA LeRC TISD C-302, (film supplement). |
| 1973 |
R.C. Hendricks, R.J. Simoneau, “Application of the Principle of Corresponding States to Two-Phase Choked Flow,” 74th National Meeting of the AIChE, New Orleans, LA, March 11–15, 1973, NASA TM X-68193. |
| 1973 |
R.C. Hendricks, I.C. Peller, A.K. Baron, “WASP—A Flexible Fortran IV Computer Code for Calculating Water and Steam Properties,” November 1973, NASA TN D-7391. |
| 1974 |
R.C. Hendricks, I.C. Peller, A.K. Baron, “Computer Program for Calculating Water and Steam Properties,” November 1974, NASA Tech Brief B74-10123. |
| 1974 |
R.C. Hendricks, “Normalizing Parameters for the Critical Flow Rate of Simple Fluids Through Nozzles,” 5th International Cryogenic Engineering Conference, International Institute of Refrigeration, Kyoto, Japan, May 7–10, 1974, NASA TM X-71545 . |
| 1975 |
R.C. Hendricks, R.J. Simoneau, R.F. Barrows, “Critical Flow and Pressure Ratio Data for LOX Flowing Through Nozzles,” 14th International Congress of the International Institute of Refrigeration, Moscow, USSR, September 20–30, 1975, AIAA International Aerospace Abstracts A75-47799, (see NASA TM X-71725). |
| 1975 |
R.C. Hendricks, A.K. Baron, I.C. Peller, “Computer Program for Calculating Thermodynamic and Transport Properties of Fluids,” NASA Tech Brief B75-10188, October 1975. |
| 1975 |
S.S. Papell, R.C. Hendricks, “Liquid Neon Heat Transfer as Applied to a 30-Tesla Cryomagnet,” 1975 Cryogenic Engineering Conference, CEC/ICMC, Queens University, Kingston, Ontario, Canada, July 22–25, 1975, paper G-5, pp. 278–281. |
| 1975 |
R.W. Graham, R.C. Hendricks, R.J. Simoneau, “Convective Heat Transfer to Low-Temperature Fluids,” in Heat Transfer at Low Temperatures, edited by W. Frost, pp. 49–86, Plenum Press, NY, 1975. |
| 1975 |
R.C. Hendricks, “Comparison of Calculated Viscosity and Skelton Table Values,” presented at the International Association for Properties of Steam (IAPS), Ottawa, Canada, September 14–19, 1975. |
| 1975 |
L.D. Nichols, V.H. Gray, R.C. Hendricks, P.T. Kerwin, “Fluid Properties, Fluid Flow, and Heat Transfer,” Paper IV, pp. 187–229 of conference proceedings, Selected Technology for the Gas Industry, held at Lewis Research Center, Cleveland, OH, March 19–20, 1975, NASA SP-5103. |
| 1975 |
R.C. Hendricks, R.J. Simoneau, R.F. Barrows, “Critical Flow and Pressure Ratio Data for LOX Flowing Through Nozzles,” 14th International Congress of the International Institute of Refrigeration, Moscow, USSR, September 20–30, 1975, NASA TM X-71725. |
| 1975 |
R.C. Hendricks, R.C. Baron, A.K. Peller, I.C. “GASP—A Computer Code for Calculating the Thermodynamic and Transport Properties for Ten Fluids: Parahydrogen, Helium, Neon, Methane, Nitrogen, Carbon Monoxide, Oxygen, Fluorine, Argon, and Carbon Dioxide,” NASA TN D-7808, February 1975. |
| 1976 |
R.C. Hendricks, R.B. McClintock, G.J. Silvestri, “Revised International Representations for the Viscosity of Water and Steam and New Representations for the Surface Tension of Water,” Winter Annual Meeting of the ASME, New York, NY, December 5–10, 1976, NASA TM X-73483, E-8706. |
| 1976 |
R.C. Hendricks, R.J. Simoneau, R.F. Barrows, “Two-Phase Choked Flow of Subcooled Oxygen and Nitrogen,” NASA TN D-8169, E-8499. |
| 1977 |
R.C. Hendricks, “Simulation of the Heat Transfer Characteristics of LOX,” ASME/AIChE 17th National Heat Transfer Conference, August 15–17, 1977, Salt Lake City, UT, ASME Paper 77-HT-9. |
| 1977 |
R.C. Hendricks, S.S. Papell, “Estimating Surfaces Temperature in Forced Convection Nucleate Boiling—A Simplified Method,” paper F-5, 19th CEC/ICMC Conference, Boulder, CO, August 2–5, 1977, University of Colorado. Published in Advances in Cryogenic Engineering., K.D. Timmerhaus, Ed. |
| 1977 |
R.C. Hendricks, R.J. Simoneau, “Two-Phase Choked Flow in Tubes With Very Large L/D,” Advances in Cryogenic Engineering, vol. 23, pp. 265–275. K.D. Timmerhaus, Ed. |
| 1977 |
S.S. Papell, R.C. Hendricks, “Boiling Incipience and Convective Boiling of Neon and Nitrogen,” Advances in Cryogenic Engineering, vol. 23, pp. 284–294, K. Timmerhaus, Ed. |
| 1977 |
R.C. Hendricks, R.J. Simoneau, “Generalized Charts for Computation of Two-Phase Choked Flow of Simple Cryogenic Liquids,” Cryogenics, February 1977, pp. 73–76. |
| 1977 |
R.C. Hendricks, R.B. McClintock, G.J. Silvestri, “Revised International Representations for the Viscosity of Water and Stream and New Representations for the Surface Tension of Water,” Transactions of the ASME, Engineering for Power, vol. 99, no. 4, pp. 664–678, October 1977. |
| 1977 |
R.C. Hendricks, “Comparison of Algorithms for Calculating the Thermal Conductivity of Water, Part II,” International Association for Properties of Steam (IAPS) Meeting, Moscow, USSR, September 11–16, 1977. |
| 1977 |
R.C. Hendricks, “Comparison of Algorithms for Calculating the Thermal Conductivity of Water,” presented to the Special Committee of International Institute for Properties of Steam (IAPS), Brown University, Providence, RI, May 13–16, 1977. |
| 1977 |
R.C. Hendricks, R.Trivisonno, “Gasplot—A Computer Program for Rapid Production of Thermophysical Properties Charts for Cycle Analysis and Property Evaluation,” 7th ASME Symposium on Thermophysical Properties National Bureau of Standards, Gaithersburg, MD, May 9–12, 1977. |
| 1977 |
R.L. Reid, R.C. Hendricks, “Effect of Tax-Credits on the Economics of Solar Heating for Homeowners,” proceedings if the 1977 Annual Meeting, American Section of the International Solar Energy Society, Orlando, FL, June 6–10, 1977, pp. 26-18 to 26-22. |
| 1977 |
R.C. Hendricks, A.L. Evans, R.L. Reid, “A Feasibility Study of a Combined Wind-Solar System for Space and Domestic Hot Water Heating,” 1977 Annual Meeting Int. Solar Energy Soc., Orlando, FL, 1977, pp. 19-41 to 19-45 . |
| 1977 |
R.C. Hendricks, R.J. Simoneau, “Two Phase Choke Flow in Tubes With Very Large L/D,” paper BC-1, CEC/ICMC, 1977 Cryogenic Engineering Conference, University of Colorado, Boulder, CO, August 2–5, 1977, NASA TM-73726. |
| 1977 |
S.S. Papell, R.C. Hendricks, “Boiling Incipience and Convective Boiling of Neon and Nitrogen,” paper EC-1, 1977, CEC/ICMC Conference, University of Colorado, Boulder, CO, August 2–5, 1977, NASA TM X-73615. |
| 1977 |
K.J. Baumeister, R.C. Hendricks, G.J. Schoessow, “Thermally Driven Oscillations and Wave Motion of a Liquid Drop,” 17th National Heat Transfer Conference , AIChE, Paper No. 25, August 14–17, 1977, Salt Lake City, UT. (Has Film Supplement C-267). TM X-73625 |
| 1977 |
R.C. Hendricks, “Simulation of the Heat Transfer Characteristics of LOX,” 17th National Heat Transfer Conference, American Society of Mechanical Engineers, Salt Lake City, UT, August 14–17, 1977, NASA TM X-73634. |
| 1977 |
R.C. Hendricks, S.S. Papell, “Estimating Surface Temperature in Forced Convection Nucleate Boiling—A Simplified Method,” 1977 Cryogenic Engineering Conference, National Bureau of Standards, University of Colorado, Boulder, CO, August 2–5, 1977, NASA TM X-73688. |
| 1977 |
R.J. Trivisonno, R.C. Hendricks, “GASPLOT—A Computer Graphics Program that Draws a Variety of Thermophysical Property Charts,” June 1977, NASA TN-D-8507, E-8627. |
| 1978 |
R.C. Hendricks, R.J. Simoneau, “Some Flow Phenomena in a Constant Area Duct with a Borda Type Inlet Including the Critical Region,” Winter Annual Meeting of the American Society of Mechanical Engineers, San Francisco, CA, December 10–15, 1978, ASME Paper 78-WA/HT-37. |
| 1978 |
R.C. Hendricks, “Low Temperature and Cryogenic Heat Transfer Panel Workshop 2,” V.J. Lunardini (Chairman), J. Smith (Sec.), Sixth International Heat Transfer Conference, Toronto, Canada, August 9, 1978. |
| 1978 |
R.C. Hendricks, R.J. Trivisonno, “Graphics Program for Charts,” NASA Tech Brief, vol. 3, issue 4, Winter 1978, page 628. |
| 1978 |
R.C. Hendricks, D.E. Daney, V.M. Yeroshenko, V. Kuznetsov, O.A. Shevchenko, “Some Heat Transfer and Hydrodynamic Problems Associated with Superconducting Cables CNK-SPTL,” US-USSR Committee for Supeconducting Power Transmission , Upton, Long Island, NY, October 5–6, 1978, DOE/NASA/0207-78/1, NASA TM-79023, E-9820. |
| 1979 |
R.C. Hendricks, “Thermophysical Property Data: Who Needs Them?,” ASME Winter Annual Meeting, New York, NY, December 2–7, 1979, ASME 79-WA/HT-17. |
| 1979 |
R.C. Hendricks, “Free Jet Phenomena in a 90-Degree Sharp Edge Inlet Geometry,” Cryogenic Engineering Conference/Intl. Cryogenic Materials Conference, Madison, WI, August 21–24, 1979. |
| 1979 |
R.C. Hendricks, “A Reduced Volumetric Expansion Factor Plot,” International Cryogenic Engineering Conference and International Cryogenic Materials Conference and International Cryogenic Materials Conference, Madison, WI, August 21–24, 1979, Paper 27. |
| 1979 |
R.C. Hendricks, “Some Flow Characteristics of Conventional and Tapered High-Pressure-Drop Simulated Seals,” ASLE Transactions, vol. 24, pp. 23–28. |
| 1979 |
R.C. Hendricks, “Reduced Volumetric Expansion and Isothermal Compressibility Factor Plots,” Cryogenic Engineering Conference/Int. Cryogenic Materials Conference, University of Wisconsin, Madison, WI, 1979, Advances in Cryogenic Engineering, vol. 25, paper L-9 pp. 682–692. |
| 1979 |
R.C. Hendricks, R.J. Simoneau, “Some Flow Phenomena in a Constant Area Duct with a Borda Type Inlet Including the Critical Region,” Winter Annual Meeting of the American Society of Mechanical Engineers, San Francisco, CA, December 10–15, 1978, ASME Paper 78-WA/HT-37, NASA TM-78943, E-9690. |
| 1979 |
R.C. Hendricks, N.P. Poolos, “Critical Mass Flux Through Short Borda Type Inlets of Various Cross-Sections,” 15th International Congress of Refrigeration, International Institute of Refrigeration, Venice, Italy, September 23–29, 1979, paper B1–77, TM-79017, E-9868. |
| 1979 |
R.C. Hendricks, “Some Aspects of a Free Jet Phenomena to 105 L/D in a Constant Area Duct,” 15th International Congress on Refrigeration, September 23-29, 1979, Venice, Italy, TM-79050. |
| 1979 |
R.C. Hendricks, V.M. Yeroshenko, L.I. Zaichik, L.S. Yanovsky, “Flow Friction of the Turbulent Coolant Flow in Cryogenic Porous Cables,” 15th International Congress of Refrigeration Science and Technology, International Institution of Refrigeration, Venice, Italy, September 23–29, 1979, DOE/NASA/0207-79-1, NASA TM-79052, E-9869. |
| 1979 |
V.M. Yeroshenko, Y.V. Kuznetsov, O.A. Shevchenko, R.C. Hendricks, D.E. Daney, “Measurements of Mixed Convective Heat Transfer to Low Temperature Helium in a Horizontal Channel,” 15th International Congress of Refrigeration, International Institute of Refrigeration, Venice, Italy, September 23–29, 1979. (also published in Progress in Refrigeration Science and Technology, Proc. vol. II, pp. 87–99, International Institute of Refrigeration, Paris, 1980), DOE/NASA/0207-79/3, NASA TM-79158, E-014. |
| 1979 |
R.C. Hendricks, “Some Flow Characteristics of Conventional and Tapered High Pressure Drop Simulated Seals,” ASLE/ASME Joint Lubrication Conference, Dayton, OH, October 16–18, 1979, NASA TM-79192. |
| 1979 |
R.C. Hendricks, “Free Jet Phenomena in a 90-Degree Sharp Edge Inlet Geometry,” Cryogenic Engineering Conference/Intl. Cryogenic Materials Conference, Madison, WI, August 21–24, 1979, NASA TM-79229. |
| 1979 |
R.C. Hendricks, “Thermophysical Property Data—Who Needs Them?,” ASME Winter Annual Meeting, New York, NY, December 2–7, 1979, NASA TM-79241, E-149. |
| 1979 |
R.C. Hendricks, J.V. Sengers, “Application of the Principle of Similarity Fluid Mechanics,” 9th International Conference on the Properties of Steam, International Association for Properties of Steam, Munich, Germany, September 8–14, 1979, NASA TM-79258, E-170. |
| 1979 |
R.C. Hendricks, “A Reduced Volumetric Expansion Factor Plot,” Cryogenic Engineering Conference, National Bureau of Standards, Madison, WI, August 21–24, 1979, NASA TM-79240. |
| 1979 |
R.J. Simoneau, R.C. Hendricks, “Two-Phase Choked Flow of Cryogenic Fluids in Converging-Diverging Nozzles,” NASA TP-1484, E-9659. |
| 1979 |
R.C. Hendricks, “Reduced Volumetric Expansion and Isothermal Compressibility Factor Plots,” Cryogenic Engineering Conference/Int. Cryogenic Materials Conference, University of Wisconsin, Madison, WI, 1979, Advances in Cryogenic Engineering, vol. 25, paper L-9 pp. 682–692. |
| 1980 |
R.C. Hendricks, V.M. Yeroshenko, L.A. Yaskin, D.D. Starostin, “Bulk Expansion Factors and Density Fluctuations in Heat and Mass Transfer,” 15th International Congress of Refrigeration, Venice, Italy, September 23–29, 1979. Progress in Refrigeration Science and Technology, vol. II, pp. 45–53, Inst. of Refrigeration, Paris, France, 1980, paper B1–119. |
| 1980 |
V.M. Yeroshenko, Y.V. Kuznetzov, O.A. Shevchenko, R.C. Hendricks, “Measurements of Mixed Convective Heat Transfer to Low Temperature Helium in a Horizontal Channel,” 15th International Congress of Refrigeration, Venice, Italy, September 23–29, 1979, paper B1–120. |
| 1980 |
R.C. Hendricks, N.P. Poolos, “Critical Mass Flux Through Short Borda Type Inlets of Various Cross Sections,” 15th International Congress of Refrigeration, Venice, Italy, September 23–29, 1979, paper B1–77. |
| 1980 |
R.C. Hendricks, “Some Aspects of a Free Jet Phenomena to 105 L/D in a Constant Area Duct,” 15th International Congress on Refrigeration, September 23–29, 1979, Venice, Italy, Paper B1–78. |
| 1980 |
R.C. Hendricks, V.M. Yeroshenko, L.I. Zaichik, L.S Yanovsky, “Flow Friction of the Turbulent Coolant Flow in Cryogenic Porous Cables,” 15th International Congress of Refrigeration Science and Technology, Proceedings, vol. II, pp. 55–62, International Institution of Refrigeration, Paris, France, 1980, paper B1–79. |
| 1980 |
R.C. Hendricks, G. McDonald, “Some Thermal Stress Problems in Porcelain Enamel-Coated Rods,” 42nd Porcelain Enamel Institute Technical Forum, Urbana, Illinois, October 29–31, 1980, Proceedings, vol. 42, 1980, pp. 178–187 |
| 1980 |
R.C. Hendricks, J.V. Sengers, “Application of the Principle of Similarity to Fluid Mechanics," Water and Steam: Their Properties and Current Industrial Applications,” 9th International Conference on Properties of Steam, Technische Universität München, F.R.G., September 10–14, 1979, J. Straub and K. Scheffler, eds., Pergamon Press, Oxford, 1980. Short version. (See unabridged NASA TM79258, 1979). |
| 1980 |
R.C. Hendricks, “Some Aspects of a Free Jet Phenomena to 105 L/D in a Constant Area Duct,” 15th International Congress on Refrigeration, International Institute of Refrigeration, September 23–29, 1979, Venice, Italy, Paper A80-10030, E-9867. |
| 1980 |
G. McDonald, R.C. Hendricks, “Effect of Thermal Cycling on ZrO2-Y2O3 Thermal Barrier Coatings,” International Conference on Metallurgical Coatings, American Vacuum Society, San Diego, CA, April 21-25, 1980. (See also NASA TM-81480.) |
| 1980 |
R.C. Hendricks, J.V. Sengers, R.J. Simoneau, “Toward the Use of Similarity Theory in Two-Phase Choked Flows,” ASME Winter Annual Meeting, November 16–21, 1980, Chicago, IL. |
| 1980 |
R.C. Hendricks, “Some Observations of a Free Jet Phenomenon in a 90-Degree Sharp-Edge Inlet Geometry,” Advances in Cryogenic Engineering, vol. 25, Paper J-2, pp. 506–520. |
| 1980 |
Proceedings of the “Rotordynamic Instability Problems in High Performance Turbomachinery,” Texas A&M University, College Station, TX, May 12–14, 1980, Cover, Preface, Table of Contents, and RDP only, NASA CP-2133. |
| 1980 |
R.C. Hendricks, “Report on Some Laboratory Activities in Heat and Mass Transfer and Rotating Fluid Dynamics in Sealed European Facilities,” prepared by NBS, Boulder Laboratories, Chem. Engr. Directorate, September, November 1980. |
| 1980 |
R.C. Hendricks, N.P. Poolos, “Critical Mass Flux Through Short Borda Type Inlets of Various Cross Sections,” 15th International Congress of Refrigeration, Venice, Italy, September 23-29, 1979, NASA TM-79017, E-9868. |
| 1980 |
G. McDonald, R.C. Hendricks, “Effect of Thermal Cycling on ZrO2-Y2O3 Thermal Barrier Coatings,” International Conference on Metallurgical Coatings, American Vacuum Society, San Diego, CA, April 21-25, 1980, NASA TM-81480, E-416, no RDP. |
| 1980 |
R.C. Hendricks, “Volume-Energy Parameters and Turbulent-Flow Density Fluctuations,“ NASA TP-1585, E-127. |
| 1981 |
R.C. Hendricks, T.T. Stetz, “Flow Through Axially Aligned Sequential Apertures of the Orifice and Borda Types,” 20th Joint ASME/AIChE National Heat Transfer Conference, Milwaukee, WI, August 2-5, 1981, Paper 81-HT-79. |
| 1981 |
R.C. Hendricks, G. McDonald, “Effects of Arc Current on the Life in Burner-Rig Thermal Cycling of Plasma-Sprayed ZrO2-Y2O3,” 6th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Cocoa Beach, FL, January 17–21, 1982, Proceedings, vol. 3, no. 9–10, September-October 1982, pp. 737–743. |
| 1981 |
R.C. Hendricks, G. McDonald, “Use of Fiber-Like Materials to Augment Cycle Life of Thick, Thermoprotective-Seal Coatings,” 6th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Cocoa Beach, FL, January 17–21, 1982, Proceedings, vol. 3, no. 9–10, September-October 1982, pp. 744–749. |
| 1981 |
R.C. Hendricks, T.T. Stetz, “Flow Through Sharp Edge Inlets, Aligned Sequential Apertures of the Orifice and Borda Types and Comparisons to Three High Performance Turbomachine Seals,” ASLE Annual Meeting, Pittsburgh, PA, 1981. |
| 1981 |
R.C. Hendricks, “Evaluation of Three Shaft Seals Proposed for High Performance Turbomachinery,” 9th International Conference on Fluid Sealing, April 1–3, 1981, Leeuwenhorst Noordwijkerhout, Netherlands, (not presented). |
| 1981 |
R.C. Hendricks, T.T. Stetz, “Flow Through Axially Aligned Sequential Apertures of the Orifice and Borda Types,” 20th Joint ASME/AIChE National Heat Transfer Conference, Milwaukee, WI, August 2–5, 1981, NASA TM-81681, E-707. |
| 1981 |
R.C. Hendricks, G. McDonald, N.P. Poolos, “Prolonging Thermal Barrier Coated Specimen Life by Thermal Cycle Management,” International Congress on Metallurgical Coatings, American Vacuum Society, San Francisco, CA, April 6–10, 1981, TM-81742, E-795. |
| 1981 |
R.C. Hendricks, G. McDonald, “Assessment of Variations in Thermal Cycle Life Data of Thermal Barrier Coated Rods,” International Conference on Metallurgical Coatings, American Vacuum Society, San Francisco, CA, April 6–10, 1981,TM-81743, E-796. |
| 1981 |
R.C. Hendricks, T.T. Stetz, “Experiments on Flow Through One to Four Inlets of the Orifice and Borda Type,” Cryogenic Engineering Conference/International Cryogenic Materials Conference, National Bureau of Standards, San Diego, CA, August 10–14, 1981, TM-82680, E-963. |
| 1981 |
R.C. Hendricks, T.T. Stetz, “Some Flow Phenomena Associated with Aligned, Sequential Apertures with Borda-Type Inlets,” May 1981, NASA TP-1792, E-479. |
| 1982 |
E.I. Griggs, E.R.F. Winter, R.J. Schoenhals, R.C. Hendricks, “Acoustic Velocities of Two-Phase Mixtures of Cryogenic Liquids,” 7th International Heat Transfer Conference, Munich Federal Republic of Germany, September 6–10, 1982, Hemisphere Publishing, vol. 5, pp. 225–230. |
| 1982 |
R.C. Hendricks, G. McDonald, “Some Inelastic Effects of Thermal Cycling on Zr02-Y2O3 Materials,” 6th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Cocoa Beach, FL, January 17–21, 1982, Proceedings, vol. 3, no. 9–10, September-October 1982, pp. 750–757. |
| 1982 |
Proceedings of the “Rotordynamic Instability Problems in High-Performance Turbomachinery – 1982,” Texas A&M University, College Station, TX, Cover, Preface, Table of Contents, and RDP only, NASA CP-2250. |
| 1982 |
R.C. Hendricks, “An Analysis of Experimental Shaft Seal Data for High Performance Turbomachines,” for SSME submitted to the ASLE/ASME Joint Lubrication Conference, Washington, DC, October 4–6, 1982. |
| 1982 |
R.C. Hendricks, T.T. Stetz, “Studies of Flows through N-Sequential Orifices,” 1982 ASME Winter Annual Meeting, Phoenix, AZ, November 14–19, 1982. |
| 1982 |
R.C. Hendricks, G. McDonald, “Effects of Arc Current on the Life in Burner Rig Thermal Cycling of Plasma Sprayed ZrO2-Y2O3,” 6th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Cocoa Beach, FL, January 17–21, 1982, TM-82795, E-1129. |
| 1982 |
R.C. Hendricks, J. Braun, V. Arp, P.J. Giarratano, “The Dryout Region in Frictionally Heated Sliding Contacts,” 7th International Heat Transfer Conference, ASME, Munich, Federal Republic of Germany, September 6–10, 1982, TM-82796, E-1130. |
| 1982 |
R.C. Hendricks, T.T. Stetz, “Flows Through Sequential Orifices With Heated Spacer-Reservoirs,” 9th International Cryogenic Materials Conference/International Cryogenic Materials Conference, Kobe, Japan, May 11–14, 1982, TM-82855, E-1224. |
| 1982 |
R.C. Hendricks, G. McDonald, “Use of Fiber-Like Materials to Augment Cycle Life of Thick, Thermoprotective-Seal Coatings,” International Conference on Metallurgical Coatings and Process Technology, American Vacuum Society, San Diego, CA, April 4–9, 1982, TM-82901, E-1284. |
| 1982 |
M.J. Braun, R.C. Hendricks, “An Experimental Investigation of Vaporous/Gaseous Cavity Characteristics of an Eccentric Journal Bearing,” ASME/ASLE Lubrication Conference, Washington, DC, October 4–6, 1982, TM-82996, E-1519. |
| 1982 |
R.C. Hendricks, “Comparative Evaluation of Three Shaft Seals Proposed for High Performance Turbomachinery,” ASLE/ASME Joint Lubrication Conference, Washington DC, October 4–6, 1982, NASA TM-83021, E-1457. |
| 1982 |
R.C. Hendricks, G. McDonald, G., “Some Inelastic Effects and Thermal Cycling on Yttria-Stabilizer Zirconia,” 84th Annual Meeting and Exposition, American Ceramic Society, Cincinnati, OH, May 2–5, 1982, NASA TM-83488. |
| 1982 |
R.C. Hendricks, T.T. Stetz, “Flow Through Aligned Sequential Orifice-Type Inlets,” March 1982, NASA TP-1967, E-682. |
| 1982 |
R.C. Hendricks, L. Kennedy, R.J. Schoenhals, “Thermophysical Fluid Properties for Heat Transfer Phenomena with Significant Body Forces,” proceedings of a workshop on Natural Convection, K.T. Yang and J.R. Lloyd, Eds., jointly sponsored by National Science Foundation and University of Notre Dame at Breckenridge, CO, July, 18–21, 1982, pp. 137–146. |
| 1983 |
R.C. Hendricks, M.J. Braun, R.L. Mullen, “Experimental Study of Bubble Cavities Attached to a Rotating Shaft in a Reservoir,” Cavitation and Multiphase Flow Forum, ASME, Houston, TX, June 20–22, 1983, Proceedings, vol. 2, pp.77–79. |
| 1983 |
R.C. Hendricks, “Measurements of Combined Forced and Free Convection Heat Transfer to Low Temperature Helium in a Horizontal Channel,” 20th Annual Meeting of the Society of Engineering Science, Inc., August 22–24, 1983, Society of Engineering Science, Inc., University of Delaware, Newark, DE, Abstract Booklet pp. 227–228. |
| 1983 |
M.J. Braun, R.L. Mullen, R.C. Hendricks, “A Thermomechanical Model for Energy Propagation in a Solid-Fluid-Solid System With One Boundary in Relative Motion,” ASME/AIChE Heat Transfer Conference, Seattle, WA, July 24–28, 1983, Paper 83-HT-97, A84-29092. |
| 1983 |
R.C. Hendricks, T.T. Stetz, “Studies of Flows Through N-Sequential Orifices,” Journal of Fluids Engineering, September 1983, vol. 105, pp. 297–302. |
| 1983 |
R.C. Hendricks, G. McDonald, R.L. Mullen, “Residual Stress in Plasma-Sprayed Ceramic Turbine Tip and Gas-Path Seal Specimens,” reprint of paper 52-C-83C, 7th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Cocoa Beach, FL, January 16–19, 1983, Proceedings, vol. 4, no. 9–10, September-October 1983, pp. 802–809. |
| 1983 |
R.L. Mullen, G. McDonald, R.C. Hendricks, M.M. Hofle, “Correlation of Compressive and Shear Stress with Spalling of Plasma-Sprayed Ceramic Materials,” 7th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Cocoa Beach, FL, January 16–19, 1983, Proceedings, vol. 4, no. 9–10, September-October 1983, pp. 810–818. |
| 1983 |
R.C. Hendricks, G. McDonald, R.L. Mullen, “The Effect of Annealing on the Creep Plasma-Sprayed Ceramics,” 7th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Cocoa Beach, FL, January 16–19, 1983, Proceedings, vol. 4, no. 9–10, September-October 1983, pp. 819–827. |
| 1983 |
R.C. Hendricks, R.L. Mullen, M.J. Braun, “Analogy Between Cavitation and Fracture Mechanics,” ASME/JSME Thermal Engineering Conference, vol. 1, Honolulu, HI, March 20–24, 1983, pp. 35–42. |
| 1983 |
J. Padovan, G. McDonald, R.C. Hendricks, R.L. Mullen, B.T.F. Chung, M.J. Braun, “Plastic Flow of Plasma Sprayed Ceramics,” International Symposium on Plastic Deformation of Ceramic Materials, Pennsylvania State University, University Park, PA, July 20–22, 1983, Proceedings entitled Deformation of Ceramic Materials II, vol. 18, pp. 473–485. |
| 1983 |
R.L. Mullen, G. McDonald, R.C. Hendricks, “Ceramic Formed by Plasma Spraying,” presented at the International Conference on Metallurgical Coatings and Process Technology Sponsored by Vacuum Metallurgy Division, American Vacuum Society, San Diego, CA, April 18–22, 1983. |
| 1983 |
M.J. Braun, R.L. Mullen, R.C. Hendricks, “An Analysis of Temperature Effects in a Tilted Journal,” presented at the Open Forum, ASME/JSME Thermal Engineering Conference, March 21–26, 1983, Honolulu, HI, library reference 85A11074. |
| 1983 |
R.L. Mullen, J.J. Rencis, M.J. Braun, R.C. Hendricks, “Comparison of Numerical Solutions of the Reynolds and Navier Stokes Equations Applied to Elastohydrodynamics,” 10th Leeds-Lyon Symposium on Tribology, Institut National des Sciences Appliquees de Lyon, September 6–9, 1983. |
| 1983 |
R.L. Mullen, M.J. Braun, R.C. Hendricks, “A Three-dimensional Numerical Method with Application to Tribological Problems,” 10th Leeds-Lyon Symposium on Tribology, Institut National des Sciences Appliquees de Lyon, September 6–9, 1983. |
| 1983 |
R.L. Mullen, R.C. Hendricks, M.J. Braun, “A Methodology for Computing Thermomechanical Behavior in Rotating Systems,” ASME Symposium, Houston, TX, 1983 Mechanical Engineers-JSME Thermal Engineering Joint Conference Proceedings, vol. 3, pp. 329–340. |
| 1983 |
R.C. Hendricks, G. McDonald, R.L. Mullen, “A Technique to Fabricate Complex Free Form Ceramic Components,” Gas Path Rub Enginetics Workshop, NASA Lewis, 1983. |
| 1983 |
R.L. Mullen, R.C. Hendricks, “Finite Element Formulation for Transient Heat Treat Problems,” Thermal Engineering Joint Conference, ASME/JSME, Honolulu, HI, March 20–24, 1983, TM-83070, E-1520. |
| 1983 |
R.C. Hendricks, R.L. Mullen, M.J. Braun, “Analogy Between Fluid Cavitation and Fracture Mechanics,” ASME/JSME Joint Thermal Engineering Conference, Honolulu, HI, March 20–24, 1983, TM-83071, E-1519. |
| 1983 |
R.C. Hendricks, G. McDonald, R.L. Mullen, M.J. Braun, B.T. Chung, J. Padovan, “Thermomechanical Loading of Multilayered Cylindrical Geometries in Thermal Cycling from 300 to 1300 K,” Thermal Engineering Joint Conference, ASME/JSME, Honolulu, HI, March 20–24, 1983, TM-83312, E-1518. |
| 1983 |
R.C. Hendricks, “Studies of Flows Through N-Sequential Orifices,” 1983 Spring Meeting of the Fluids Engineering Applied Mechanics and Bioengineering Division of the ASME, Houston, TX, June 20–22, 1983, Paper 83-FE-22, TM-83313, E-1554. |
| 1983 |
R.C. Hendricks, “A Refrigerated Dynamic Seal,“ Cryogenic Engineering Conference/International Cryogenic Materials Conference, Colorado Springs, CO, August 15–19, 1983, TM-83378, E-1649. |
| 1983 |
R.C. Hendricks, G. McDonald, R.L. Mullen, “The Effect of Annealing of Creep of Plasma Sprayed Ceramics,” 7th Annual Conference on Ceramics and Advanced Materials, American Ceramic Society, Cocoa Beach, FL, January 16–23, 1983, paper 54C-83C, NASA TM-83396, E-1673. |
| 1983 |
R.L. Mullen, G. McDonald, R.C. Hendricks, M.M. Hofle, “Correlation of Compressive Stress with Spalling of Plasma Sprayed Ceramic Materials,” 7th Annual Conference on Ceramics and Advanced Materials, American Ceramic Society, Cocoa Beach, FL, January 16–19, 1983, TM-83406, E-1684 |
| 1983 |
R.C. Hendricks, G. McDonald, R.L. Mullen, “Residual Stress in Plasma Sprayed Ceramic Turbine Tip and Gas Path Seal Specimens,” 7th Annual Conference on Ceramics and Advanced Materials, American Ceramic Society, Cocoa Beach, FL, January 16–23, 1983, TM-83418, E-1706. |
| 1983 |
R.C. Hendricks, “A Comparison of Flow Rates and Pressure Profiles for N-Sequential Inlets and Three Related Seal Configurations,” Cryogenic Engineering Conference and International Cryogenic Materials Conference, U.S. Dept of Commerce, National Bureau of Standards, Colorado Springs, CO, August 15–19, 1983, TM-83442, E-1741. |
| 1984 |
B.T.F. Chung, M.M. Kermani, M.J. Braun, J. Padovan, R. Hendricks, “Heat Transfer in Thermal Barrier Coated Rods with Circumferential and Radial Temperature Gradients,” 29th International Gas Turbine Conference and Exhibit, Amsterdam, The Netherlands, June 4–7, 1984, Paper 84-GT-181, A84-46982. |
| 1984 |
M.J. Braun, R.C. Hendricks, “An Experimental Investigation of the Vaporous/Gaseous Cavity Characteristics of an Eccentric Journal Bearing,” ASLE Transactions, vol. 27, 1, pp. 1–14. |
| 1984 |
M.J. Braun, R.C. Hendricks, “An Experimental Investigation of the Vaporous/Gaseous Cavity Characteristics of an Eccentric Journal Bearing,” ASLE Transactions, vol. 27, 1, pp. 1–14. |
| 1984 |
M.J. Braun, R.L. Mullen, R.C. Hendricks, “An Analysis of Temperature Effect in a Finite Journal Bearing with Spatial Tilt and Viscous Dissipation,” presented at ASME/ASLE Conference on Lubrication, Hartford, CT, October 18–20, 1983. |
| 1984 |
M.J. Braun, R.C. Hendricks, R.L. Mullen, “Studies of Two-Phase Flow in Hydrostatic Journal Bearings,” ASME Cavitation and Multiphase Flow Forum, 1984, FED-vol. 9, pp. 61–65. |
| 1984 |
M.J. Braun, R.C. Hendricks, “An Experimental Investigation of the Effect of Pressure and Temperature Levels on the Development and Nature of the Cavitation Region in a Submerged Journal Bearing,” ASME Cavitation and Multiphase Flow Forum, 1984, FED-vol. 9, pp. 69–71. |
| 1984 |
Proceedings of the “Rotordynamic Instability Problems in High-Performance Turbomachinery 1984,” Texas A&M University, College Station, TX, May 28–30, 1984, Cover, Preface, Table of Contents, and RDP only, NASA CP-2338. |
| 1984 |
M.J. Braun, R.C. Hendricks, “An Experimental Investigation and Some Analytical Considerations Concerning the Vaporous/Gaseous Cavity Characteristics of an Eccentic Shaft Seal or Bearing,” Heat and Mass Transfer in Rotating Machinery (A86-24451 09-34), Washington, DC, Hemisphere Publishing Corp., 1984, pp. 201–213. |
| 1984 |
J. Padovan, D. Dougherty, R.C. Hendricks, M.J. Braun, B.T.F. Chung, “High Temperature Thermomechanical Analysis of Ceramic Coatings,” Journal of Thermal Stresses, pp. 51–74. |
| 1984 |
M.J. Braun, R.L. Mullen, R.C. Hendricks, “A Parametric Study of Pressure and Temperature a Narrow Gap Between a Stationary Outer Cylinder and an Inner Rotating Misaligned Shaft,” presented at the National Heat Transfer Conference, Niagra Falls, NY, 1984. |
| 1984 |
R.L. Mullen, M.J. Braun, R.C. Hendricks, “Finite Element Formulation of A Reynolds Type Equation for a Power Law Fluid,” presented at the 5th International Symposium on Finite Element Methods in Flow Problems, Austin, TX, 1984. |
| 1984 |
R.C. Hendricks, M.J. Braun, R.L. Mullen, “Experimental Study of Bubble Cavities Attached to a Rotating Shaft in a Reservoir,” Cavitation and Multiphase Flow Forum, ASME, New Orleans, LA, February 11-17, 1984, TM-83586, E-1975. |
| 1984 |
R.C. Hendricks, T.T. Stetz, “Flow Rates and Pressure Profiles for One to Four Axially Aligned Borda Inlets,” December 1984, NASA TP-2390, E-1979. |
| 1985 |
R.L. Mullen, R.C. Hendricks, “A Three-Body Approach to Friction Contact Modelling”, 22nd Annual Meeting of the Society of Engineering Sciences, Pennsylvania State University, University Park, PA, October 1985 (abstract only). |
| 1985 |
J.K. Little, G.P. Allen, G. McDonald, R.C. Hendricks, “Ribbon-Burner Simulation of T-700 Turbine Shroud for Ceramic-Lined Seals Research,” 9th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Cocoa Beach, FL, January 20–23, 1985, Proceedings, vol. 6, no. 7–8, July-August 1985, pp. 849–861. |
| 1985 |
R.L. Mullen, R.C. Hendricks, G. McDonald, “Finite Element Analysis of Residual Stress in Plasma-Sprayed Ceramic,” 9th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Cocoa Beach, Florida, January 20-23, 1985, Proceedings, vol. 6, no. 7–8, July-August 1985, pp. 871–879. |
| 1985 |
T.J. Biesiadny, G. McDonald, R.C. Hendricks, G.A. Klann, E.S. Lassow, “Experimental Study of Ceramic-Coated Tip Seals for Turbojet Engines,” American Ceramic Society, 9th Annual Conference on Composites and Advanced Ceramic Materials, Cocoa Beach, FL, January 20-23, 1985, Proceedings, vol. 6, no. 7–8, July-August 1985, pp. 880–895. |
| 1985 |
M.J. Braun, R.L. Mullen, R.C. Hendricks, R.L. Wheeler III, “Development and Discussion of a Two-Phase Homogeneous Model for a Generalized Reynolds Equation,” 20th Annual Cavitation and Multiphase Flow Forum, ASME, Albuquerque, NM, June 24–26, 1985, FED-vol.23, pp. 120–123. |
| 1985 |
R.C. Hendricks, M.J. Braun, R.L. Wheeler III, R.L. Mullen, “Two-Phase Flows Within Systems With Ambient Pressure Above the Thermodynamic Critical Pressure,” pp. 83–96 of “Instability in Rotating Machinery,” Bentley Rotodynamics Research, Carson City, NV, June 10–14, 1985, CP-2409, E-2652. |
| 1985 |
D.E. Bently, A. Muszynska, R.C. Hendricks, editors, “Instability in Rotating Machinery,” Cover, Preface, and RDP only, CP-2409. |
| 1985 |
M.J. Braun, R.L. Wheeler III, R.C. Hendricks, R.L. Mullen, “Finite Difference Solution for a Generalized Reynolds Equation with Homogeneous Two-Phase Flow,” 1st International Symposium on Transport Phenomena, Honolulu, HI, April 28-May 3, 1985. Published in "Heat Transfer and Fluid Flow in Rotating Machinery," edited by Wen-Jei Yang, Hemisphere Publisher Corporation, pp. 424–439. |
| 1985 |
R.L. Mullen, A. Prekwas, M.J. Braun, R.C. Hendricks, “Comparison of Generalized Reynolds and Navier Stokes Equations for Flow of a Power Law Fluid,” 1st International Symposium on Transport Phenomena, Honolulu, HI, April 28-May 3, 1985. Published in "Heat Transfer and Fluid Flow in Rotating Machinery," edited by Wen-Jei Yang, Hemisphere Publisher Corporation, pp. 440–460. |
| 1985 |
R.L. Mullen, M.J. Braun, R.C. Hendricks, “Finite Element Models for a Reynolds Equation Using a Power Law Fluid,” Comp. Methods in Application Mechanics, 1985. |
| 1985 |
J. Padovan, B.T.F. Chung, M.J. Braun, R.L. Mullen, R.C. Hendricks, G. McDonald, “Application of a Plastic Flow Thermomechanical Algorithm to Plasma-Sprayed Ceramic Turbine Seals,” presented at Cocoa Beach Conference, 1985. |
| 1985 |
R.L. Mullen, A. Prekwas, M.J. Braun, R.C. Hendricks, “Finite Element and Finite Difference Methods for a Reynolds Equation Using a Power Law Fluid,” Hawaii Symposium. |
| 1985 |
R.L. Mullen, M.J. Braun, R.C. Hendricks, “Finite Element Solutions for the Stiffness and Damping of a Three-Dimensional Journal Bearing Using a Non-Newtonian Fluid,” ASME/ASLE meeting, Atlanta, GA. |
| 1985 |
R.C. Hendricks, G. McDonald, “Film and Interstitial Formation of Metals in Plasma Sprayed Ceramics,” 12th International Conference on Metallurgical Coatings, American Vacuum Society, April 15–19, 1985, Los Angeles, CA. (See TM-86993.) |
| 1985 |
R.L. Mullen, M.J. Braun, R.C. Hendricks, “Finite Element Formulation for Well Disbursed Solids in Lubricated Contacts,” proposed paper, Symposium on Global Studies of Mechanisms and Local Analyses of Surface Distress Phenomena, 12th Leeds-Lyon Symposium, September 3–6, 1985, INSA Villeurbanne Cedex, France. (Withdrawn) |
| 1985 |
M.J. Braun, R.L. Wheeler III, R.L. Mullen, R.C. Hendricks, “Heat Transfer in a Thin Annular Fluid Film with Internal Heat Generation,” ASME/AIChE National Heat Transfer Conference, Denver, CO, August 4–7, 1985. |
| 1985 |
M.J. Braun, R.L. Mullen, R.C. Hendricks, R.L. Wheeler III, “Fluid Flow and Heat Transfer in Annuli with Axial Pressure Gradient a Non-Isothermal Rotating Inner Cylinder and an Insulated Outer Cylinder”, 1985 American Society of Mechanical Engineers National Heat Transfer Conference. |
| 1985 |
T.J. Biesiadny, G.E. McDonald, R.C. Hendricks, J.K. Little, R.A. Robinson., G.A. Klann, E. Lassow, “Experimental and Analytical Study of Ceramic-Coated Turbine-Tip Shroud Seals for Small Turbine Engines,” TM-86881, E-2343. |
| 1985 |
R.C. Hendricks, M.J. Braun, R.L. Mullen, R.E. Burcham, W.A. Diamond, “Analysis of Experimental Shaft Seal Data for High-Performance Turbomachines—as for Space Shuttle Main Engines,” Symposium on Transport Phenomena in Rotating Machinery, University of Michigan, University of Hawaii, ASME, Gas Turbine Society of Japan, Turbomachinery Society of Japan, et al., Honolulu, HI, April 28–May 3, 1985, TM-86928, E-2430. |
| 1985 |
J.K. Little, G.P. Allen, G. McDonald, R.C. Hendricks, “Ribbon-Burner Simulation of T-700 Turbine Shroud Section for Ceramic-Lined Seals Research,” 9th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Cocoa Beach, FL, January 20–24, 1985, TM-86940, E-2458. |
| 1985 |
R.C. Hendricks, M.J. Braun, R.L. Wheeler III, R.L. Mullen, “Nested Subcritical Flows Within Supercritical Systems,” 20th Annual Cavitation and Multiphase Flow Forum, ASME, Albuquerque, NM, June 24–26,1985, TM-86980, E-2518. |
| 1985 |
R.C. Hendricks, G. McDonald, “Metallic and Metalloceramic Coating by Thermal Decomposition,” 12th International Conference on Metallurgical Coatings, American Vacuum Society, Los Angeles, CA, April 15–19, 1985, TM-86992, E-2538. |
| 1985 |
R.C. Hendricks, G. McDonald, “Film and Interstitial Formation of Metals in Plasma Sprayed Ceramics,” 12th International Conference on Metallurgical Coatings, American Vacuum Society, April 15–19, 1985, Los Angeles, CA, TM-86993, E-2539. |
| 1985 |
R.J. Quentmeyer, G. McDonald, R.C. Hendricks, “Fabrication of Ceramic Substrate-Reinforced and Free Forms,” 12th International Conference on Metallurgical Coatings, American Vacuum Society, Los Angeles, CA, April 15–19, 1985, TM-86994, E-2540. |
| 1985 |
R.C. Hendricks, R.L. Mullen, M.J. Braun, “Refrigerated Dynamic Seal to 6.9 MPa (1000 psi),” Cryogenic Engineering Conference and International Cryogenic Materials Conference, CEC/ICMC and NBS, Cambridge, MA, August 12–16, 1985, TM-87108, E-2708. |
| 1985 |
R.C. Hendricks, T.T. Stetz, “Flow Rate and Profiles for One to Four Axially Aligned Orifice Inlets,” May 1985, NASA TP-2469, E-1980. |
| 1986 |
A. Kumakawa, M. Niino, R.C. Hendricks, P.J. Giarratano, V.D. Arp, “Volume-Energy Parameters for Heat Transfer of Supercritical Fluids,” 15th International Symposium in Space Technology and Science, Tokyo, Japan , May 19–20, 1986, Proceeding vol. 1, A87-2276 13-12, Tokyo, AJNE Publishing, Inc., 1986, pp. 389–399. |
| 1986 |
M.J. Braun, R.L. Wheeler III, R.C. Hendricks, “A Fully Coupled Variable Properties Thermohydraulic Model for a Cryogenic Hydrostatic Journal Bearing,” ASME/ASLE Joint Tribology Conference, Pittsburgh, PA, October 20-22, 1986, paper 86-Trib-55. (See also 1987, Journal of Tribology.) |
| 1986 |
A.K. Majumdar, R.C. Hendricks, M.J. Braun, R.L. Mullen, “Flow in a Combining Manifold Heat Exchanger,” Beijing International Symposium on Hydrogen Systems, May 7–11, 1985, Beijing, China, Mrs. Ann G. Raffle, Symposium Coordinator, International Association for Hydrogen Energy, P.O. Box 248266, Coral Gables, FL 33124. |
| 1986 |
R.C. Hendricks, M. Niino, A. Kumakawa, V.M. Yeroshenko, L.A. Yashkin, A.K. Majumdar, T. Mukerjee, “Friction Factors and Heat Transfer Coefficients for Hydrogen Systems Operating at Supercritical Pressures,” Beijing International Symposium on Hydrogen Systems, May 7–11, 1985, Beijing, China. |
| 1986 |
D.W. Childs, J.M. Vance, R.C. Hendricks, editors, “Rotordynamic Instability Problems in High-Performance Turbomachinery 1986,” Texas A&M University, U.S. Army Research Office, Wright-Patterson Air Force Base, College Station, TX, June 2–4, 1986, Cover, Preface, Table of Contents, and RDP only, CP-2443, E-3136. |
| 1986 |
R.C. Hendricks, R.J. Simoneau, J.W. Dunning, Jr., “Heat Transfer in Space Power and Propulsion Systems,” Mechanical Engineering, vol. 108, February 1986, pp. 40–52. |
| 1986 |
M.J. Braun, R.L. Wheeler III, R.L. Mullen, R.C. Hendricks, “Hydrodynamic Behavior in Hydrostatic Bearing,” ASLE Annual Meeting |
| 1986 |
J. Padovan, M.J. Braun, B. Chung, R.L. Mullen, G. McDonald, R.C. Hendricks, “Thermomechanical Design Criteria for ZrO2-X-Y2O3-Coated Surfaces," Zirconia 86, The Ceramic Society of Japan, Tokyo, 1986. |
| 1986 |
R.C. Hendricks, M.J. Braun, R.L. Mullen, “Two-Phase Flows and Heat Transfer Within Systems With Ambient Pressure Above the Thermodynamic Critical Pressure,” 8th International Heat Transfer Conference and Exhibition, San Francisco, CA, August 17–22, 1986, paper TP-13, TM-87228, E-2897. |
| 1986 |
R.L. Mullen, J. Padovan, M.J. Braun, B.T.F. Chung, G. McDonald, R.C. Hendricks, “Thermomechanical Design Criteria for Ceramic-Coated Surfaces,” 6th CIMTEC World Congress on High Tech Ceramics, Italian Ministry for Science and Technology, ENEA, American Ceramic Society, Milan, Italy, June 23–28, 1986, TM-87328, E-3002. |
| 1987 |
R.L. Mullen, R.C. Hendricks, G. McDonald, “Interface Roughness Effect on Stresses in Ceramic Coatings,” 11th Annual Conference on Composites and Advanced Ceramic Materials, Cocoa Beach, FL, January 18–23, 1987, Ceramic Engineering and Science Proceedings, vol. 8, July-August 1987, pp. 559–571. |
| 1987 |
R.L. Mullen, B. Vleck, R.C. Hendricks, G. McDonald, “Some Adhesion/Cohesion Characteristics of Plasma Sprayed ZrO2-Y2O3 Under Tensile Loading,” 11th Annual Conference on Composites and Advanced Ceramic Material 1987, American Ceramic Society, Ceramic Engineering and Science, Proceedings 8, vol. 7, pp. 583–595. |
| 1987 |
J. Padovan, B.T.F.Chung, G.E. McDonald, R.C. Hendricks, “Thermomechanical Behavior of Plasma-Sprayed ZrO2-Y2O3 Coatings Influenced by Plasticity, Creep, and Oxidation,” 11th Annual Conference on Composites, Advanced Ceramics and Composite Materials, American Ceramic Society, Cocoa Beach, FL, January 18–23, 1987, vol. 8, pp. 572–582. |
| 1987 |
M.J. Braun, C. Batur, N. Ida, B. Rose, R.C. Hendricks, R.L. Mullen, “A Non-Invasive, Laser Based Flow Analysis for Thin Film Flows at Low Reynolds Numbers,” American Society of Mechanical Engineers-Japan Society of Mechanical Engineers, Thermal Engineering Joint Conference, Honolulu, HI, March 22–27, 1987, vol. 2, pp. 71–78. |
| 1987 |
M.J. Braun, R.L. Wheeler III, R.C. Hendricks, “Thermal Shaft Effects on Load-Carrying Capacity of a Fully Coupled, Variable-Properties Cryogenic Journal Bearing,” ASLE Transactions, vol. 30, pp. 282–292, 1987, from ASME-ASLE Tribology Conference, Pittsburgh PA, October 20–22, 1986. |
| 1987 |
M.J. Braun, C. Batur, B. Rose, N. Ida, R.C. Hendricks, R.L. Mullen, “A Non-Invasive Laser-Based Method in Flow Visualization and Evaluation in Bearings,” Institute of Mechanical Engineers, International Conference on Tribology, Friction, Lubrication, and Wear, London, England, July 1–3, 1987, Paper C188/87. |
| 1987 |
M.J. Braun, R.L. Wheeler III, R.C. Hendricks, ”A Fully Coupled Variable Properties Thermohydraulic Model for a Cryogenic Hydrostatic Journal Bearing,” Journal of Tribology, July 1987, vol. 109, pp. 405–416. |
| 1987 |
R.L. Mullen, G. McDonald, R.C. Hendricks, “Thermomechanical Stresses in a Simulated Interlocking Joint with Material Deposition or Swelling,” 11th Annual Conference on Composites and Advanced Ceramic Material 1987, American Ceramic Society, Ceramic Engineering and Science, Proceedings 8, vol. 7, pp. 559–571. |
| 1987 |
R.L. Mullen, R.C. Hendricks, M.J. Braun, "Automatic Measurement of Crack Growth During Fatigue Test," 33rd International Instrumentation Symposium, Instrument Society of America, May 3–8, 1987, Las Vegas, NV. |
| 1987 |
M.J. Braun, C. Batur, R.L. Mullen, R.C. Hendricks, “Computer Methodology for Quantitative Flow Visualization,” 33rd International Instrumentation Symposium, Instrument Society of America, May 3–8, 1987, Las Vegas, NV. |
| 1987 |
R.C. Hendricks, L.T. Tam, A.J. Przekwas, R.L. Mullen, A.K. Singhal, “A Multidimensional Numerical Algorithm of Seal/Bearing Flows for Turbomachines,” Proceedings 17th International Congress for Kaltetchnik, 1987. |
| 1987 |
L.T. Tam, A.J. Przekwas, A. Muszynska, R.C. Hendricks, M.J. Braun, R.L. Mullen, “Numerical and Analytical Study of Fluid Dynamic Forces in Seals and Bearings,” 11th Biennial Design Conference on Vibration and Noise, ASME, Boston MA., September 27–30, 1987, TM-100268, E-3903. |
| 1987 |
R.C. Hendricks, L.T. Tam, M.J. Braun, B.L. Vleck, “Evaluation of Seals for High-Performance Cryogenic Turbomachines," 17th International Congress of Refrigeration, Vienna, Austria, August 24–29, 1987, TM-88919, E-3348. |
| 1987 |
J. Padovan, B.T.F.Chung, G.E. McDonald, R.C. Hendricks, “Thermomechanical Behavior of Plasma-Sprayed ZrO2-Y2O3 Coatings Influenced by Plasticity, Creep, and Oxidation,” 11th Annual Conference on Composites, Advanced Ceramics and Composite Materials, American Ceramic Society, DOD, NASA, Cocoa Beach, FL, January 18–23, 1987, TM-88940, E-3385. |
| 1987 |
R.C. Hendricks, “Three Step Labyrinth Seal for High-Performance Turbomachines,” June 1987, NASA TP-1848, E-3186. |
| 1987 |
R.C. Hendricks, “Three-Step Cylindrical Seal for High-Performance Turbomachines,” June 1987, NASA TP-1849, E-3185. |
| 1987 |
R.C. Hendricks, “Straight Cylindrical Seal for High-Performance Turbomachines,” NASA TP-1850, E-3184. |
| 1988 |
L.T. Tam, A.J. Przekwas, A.Muszynska, R.C. Hendricks, M.J. Braun, R.L. Mullen, “Numerical and Analytical Study of Fluid Dynamic Forces in Seals and Bearings,” Journal of Vibration, Acoustics, Stress, and Reliability in Design, American Society of Mechanical Engineers, vol. 110, 1988, pp. 315–325. |
| 1988 |
G. McDonald, R.C. Hendricks, R.L. Mullen, J. Padovan, M.J. Braun, B.T.F. Chung, “Designing Ceramic Coatings,” NASA Tech Briefs, LEW-14545, vol. 12, issue 4, pp. 46. |
| 1988 |
R.C. Hendricks, L.T. Tam, B.L. Vleck, “Seals for Cryogenic Turbomachines,” NASA Tech Briefs, LEW-14556, vol. 12, issue 8, pp. 82. |
| 1988 |
R.C. Hendricks, L.T. Tam, A. Przekwas, A. Muszynska, M.J. Braun, R.L. Mullen, “Numerical Modeling of Multidimensional Flow in Seals and Bearings Used in Rotating Machinery," 2nd International Symposium on Transport Phenomena, Dynamics, and Design of Rotating Machinery, ASME and JSME, Honolulu, HI, 1988, Hemisphere Publishing Corp. |
| 1988 |
R.C. Hendricks, “Shock Dissipation with Cryogenic Fluid Injection,” Videotape (NTSC, VHS). |
| 1988 |
R.C. Hendricks, L.T. Tam, A. Przekwas, A. Muszynska, M.J. Braun, R.L. Mullen, “Numerical Modeling of Multidimensional Flow in Seals and Bearings Used in Rotating Machinery,” 2nd International Symposium on Transport Phenomena, Dynamics, and Design of Rotating Machinery, ASME and JSME, Honolulu, HI, April 4–6, 1988, TM-100779, E-3909. |
| 1989 |
R.J. Simoneau, R.C. Hendricks, H.J. Gladden, “Heat Transfer in Aerospace Propulsion,” 1988 National Heat Transfer Conference, ASME, Houston, TX, July 24–27, 1988, Proceedings, vol. 3. |
| 1989 |
J. Padovan, D. Dougherty, R.C. Hendricks, “Cyclic Stress Analysis of Ceramic Coated Gas Turbine Seals,” N89-13662, pp. 203–209. |
| 1989 |
M.J. Braun, V.A. Canacci, L. Russell, R.C. Hendricks, “A Laser Based Computer Aided Non-Intrusive Technique for Full Field Flow Characterization in Macroscopic Curved Channels,” B. Khalighi, M.J. Braun, C.J. Freitas, Editors, ASME FED, Flow Visualization-1989, vol. 85, pp. 15–22. |
| 1990 |
R.C. Hendricks, R.L. Mullen, M.J. Braun, “Refrigerated Dynamic Seal to 6.9 MPa (1000 psi),” Advances in Cryogenic Engineering, edited by R.W. Fast, Plenum Press, vol. 35, Part B, pp. 1007–1016 |
| 1990 |
S.L. Jenkins, A.K. Majumdar, R.C. Hendricks, “Investigation of Two and Three Parameter Equations of State for Cryogenic Fluids,” Advances in Cryogenics Engineering, edited by R.W. Fast, Plenum Press, vol. 35, Part B, pp 1487–1491. |
| 1990 |
R.C. Hendricks, D.R. Boldman, H.E. Neumann, B.L. Vlcek, “Qualitative Investigation of Cryogenic Fluid Injection Into a Supersonic Flow Field,” Advances in Cryogenic Engineering, edited by R.W. Fast, Plenum Press, Volume 35, pp. 469-476. |
| 1990 |
R.L. Mullen, M.J. Braun, R.C. Hendricks, “Numerical Modeling of Flows in Simulated Brush Seal Configurations,“ AIAA/SAE/ASME/ASEE 26th Joint Propulsion Conference, July 16–18, 1990, Orlando, FL, AIAA–90–2141. |
| 1990 |
M.J. Braun, V.A. Canacci, R.C. Hendricks, “Flow Visualization and Motion Analysis for a Series of Four Sequential Brush Seals,” AIAA/SAE/ASME/ASEE 26th Joint Propulsion Conference, July 16–18, 1990, Orlando, FL, AIAA–90–2482. |
| 1990 |
R.C. Hendricks, M.J. Braun, R.L. Mullen, R.L., “Brush Seals Configurations for Cryogenic and Hot Gas Applications,” 1990 Conference on Advanced Earth to Orbit Propulsion Technology, Huntsville, AL, May 15–17, 1990. |
| 1990 |
M.J. Braun, R.C. Hendricks, V.A. Canacci, “Non-Intrusive Qualitative and Quantitative Flow Characterization and Bulk Flow Model for Brush Seals,” International Tribology Conference, Nagoya, Japan, October 1990. |
| 1990 |
Braun, M.J., Hendricks, R.C., Canacci, V. “Flow Visualization in a Simulated Brush Seal,” ASME Paper no. 90-GT-217, presented at the 1990 ASME Turbo Expo-Land, Sea and Air, Brussels, Belgium, June 11–14, 1990. |
| 1990 |
R.C. Hendricks, M.J. Braun, V.A. Canacci, R.L. Mullen, “Brush Seals in Vehicle Tribology,” 13th Leeds-Lyon Symposium on Tribology, Leeds, England, 1990, E-5712. |
| 1990 |
M.J. Braun, R.C. Hendricks, M. Kazmierzcak, “Flow Visualization A Simulated Brush Seal,” Third International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, HI, April 1–4, 1990. |
| 1991 |
R.C. Hendricks, J. Schlumberger, M.J. Braun, F. Choy, R.L. Mullen, “A Bulk Flow Model of a Brush Seal System,” 1991 ASME Turbo Expo-Land, Sea and Air, 36th ASME Int. Gas Turbine and Aeroengine Congress and Expo, June 3–6, 1991, Orlando, FL, 91-GT-325. |
| 1991 |
M.J. Braun, R.C. Hendricks, Y. Yang, “Effect of Brush Seal Morphology on Leakage and Pressure Drops,” AIAA/SAE/ASME/ASEE 27th Joint Propulsion Conference, Sacramento, CA, June 24–26, 1991, AIAA–91–2106. |
| 1991 |
R.C. Hendricks, “Seals Related Research at NASA Lewis Research Center,” pp. 53–65 within NASA CP-10070, “Seals Flow Code Development,” Cleveland, OH, March 26, 1991, E-6219. |
| 1991 |
Proceedings of the “Rotordynamic Instability Problems in High-Performance Turbomachinery 1990,“ workshop held at Texas A&M University, College Station, TX, Cover, Preface and Table of Contents, and RDP only, NASA CP-3122, E-5628. |
| 1991 |
M.J. Braun, R.C. Hendricks, V.A. Canacci, “Flow Visualization and Pressure Drop Measurements in a Simulated Brush Seal with Variations in Fence Height,” to be presented at the 27th AIAA, SAE, ASME, ASEE Joint Propulsion Conference, San Diego, CA, June 24–26, 1991. |
| 1991 |
R.C. Hendricks, M.J. Braun, V.A. Canacci, R.L. Mullen, “Simulation of Brush Insert for Leading-Edge-Passage Convective Heat Transfer,” Fourth International Symposium on Transport Phenomena (ISTP-4) in Heat and Mass Transfer, Sidney, Australia, July 14–18, 1991, NASA TM-103801, E-6093. |
| 1991 |
R.C. Hendricks, “Paramagnetic Propellant Orientation,” 27th AIAA/SAE/ASME Joint Propulsion Conference, Sacramento, CA, June 24–26, 1991, AIAA–91–2325, NASA TM-104390, E-6165. |
| 1991 |
R.C. Hendricks, M.P. Proctor, J.A. Schlumberger, M.J. Braun, R.L. Mullen, “Some Preliminary Results of Brush Seal/Rotor Interference Effects on Leakage at Zero and Low RPM Using a Tapered-Plug Rotor,” AIAA/SAE/ASME/ASEE 27th Joint Propulsion Conference, Sacramento, CA, June 24–26, 1991, AIAA–91–3390, NASA TM-104396, E-6212. |
| 1991 |
R.C. Hendricks, J. Schlumberger, M. Proctor, “A Qualitative View of Cryogenic Fluid Injection into High Speed Flows,” 18th International Congress of Refrigeration Inc., August 10–17, 1991, Saint-Hyancinthe, Quebec, Canada, NASA TM-105139, E-6410. |
| 1991 |
R.C. Hendricks, “Qualitative Investigation of Cryogenic Injected Shock Dissipation,” Cryogenic Engineering Conference, University of Alabama at Huntsville and MSFC, Huntsville, AL, June 11–14, 1991, NASA TM-105140, E-6244. |
| 1991 |
J.A. Schlumberger, M.P. Proctor, R.C. Hendricks, “Eccentricity Effects on Leakage of a Brush Seal at Low Speeds,” Winter Meeting of the ASME, Atlanta, GA, December 1–6, 1991, NASA TM-105141, E-6414. |
| 1991 |
M.J. Braun, V.A. Canacci, R.C. Hendricks, “Flow Visualization and Quantitative Velocity and Pressure Measurements in Simulated Single and Double Brush Seals,” Tribology Transactions, vol. 34, pp.70-80, presented at the 49th STLE Annual Meeting, Denver, CO, May 7–10, 1990, . |
| 1992 |
R.C. McDonald, R.C. Hendricks, R.L. Mullen, “Bonded Ceramic Foams Reinforced With Fibers for High Temperature Use,” 16th Annual Conference on Composites and Advanced Ceramic Materials, Cocoa Beach, FL, January 7–10, 1992, Proceedings, vol. 13, no. 7-8, pp. 267–270. |
| 1992 |
M.M. Athavale, A.J. Przekwas, R.C. Hendricks, “A Finite Numerical Method to Calculate Fluid Forces and Rotordynamic Coefficients in Seals,” AIAA/SAE/ASME/ASEE 28th Joint Propulsion Conference and Exhibit, Nashville, TN, July 6–8, 1992, AIAA–92–3712. |
| 1992 |
R.C. Hendricks, J.A. Carlile, A.D. Liang, B.M. Steinetz, B.T. Easter, J.W. Onstott, H. Howe, “Static Brush Seals for Propulsion System Interfaces,” of Advanced Earth-to-Orbit Propulsion Technology, Huntsville, AL, May 19–21, 1992, NASA CP 3174, vol. 1, pp. 432-438. |
| 1992 |
J.A. Carlile, R.C. Hendricks, D.A. Yoder, “Brush Seal Leakage Performance With Gaseous Working Fluids at Static and Low Rotor Speed Conditions,” 37th International Gas Turbine and Aeroengine Congress, ASME, Cologne, Germany, June 1–4, 1992, NASA TM-105400, E-6796. |
| 1992 |
R.C. Hendricks, A.D. Liang, D.W. Childs, M.P. Proctor, “Development of Advanced Seals for Space Propulsion Turbomachinery,” 1992 Aerospace Atlantic International Conference and Expo, SAE, Dayton, OH, April 6–10, 1992, NASA TM-105659, E-7024. |
| 1992 |
R.C. Hendricks, T.A. Griffin, G.B. Bobula, R.C. Bill, H.W. Howe, “Integrity Testing of Brush Seal in Shroud Ring of T-700 Engine,” August 1992, NASA TM-105863, E-7282. (Also published on pp. 117–138 in “Seals Flow Code Development 92,“ NASA CP-10124, Cleveland, OH, August 5–6, 1992, E-8172.) |
| 1992 |
R.C. Hendricks, J.A. Carlile, A.D. Liang, “Brush Seal Bristle Flexure and Hard-Rub Characteristics,” TM-105864, E-7281. Also printed as pp. 95–273 in “Seals Flow Code Development 92,” NASA CP-10124, Cleveland, OH, August 5–6, 1992, E-8172. |
| 1993 |
R.C. Hendricks, T.A. Griffin, G.B. Bobula, R.C. Bill, H.W. Howe, “Integrity Testing of Brush Seal in Shroud Ring of T-700 Engine,” ASME Intl Gas Turbine and Aeroengine Congress and Exposition, Cincinnati, OH, May 24–27, 1993, 93-GT-373 (see also E-7282). |
| 1993 |
M.M. Athavale, A.J. Przekwas, R.C. Hendricks, “Driven Cavity Simulation of Turbomachine Blade Flows with Vortex Control,” 31st Aerospace Sciences Meeting and Exhibit, AIAA, Reno, NV, January 11–14, 1993, AIAA–93–0390. |
| 1993 |
J. Scharrer, R.C. Hendricks, “Results of Cryogenic Brush Seal Testing,” page 215 of “Seals Flow Code Development 92,” Cleveland, OH, August 5–6, 1992, NASA CP-10124, E-8172. |
| 1993 |
J. Yasuna, summary by R.C. Hendricks, “Stability of Two-Phase Face Seals,” page 273 of “Seals Flow Code Development 92,” Cleveland, OH, August 5–6, 1992, NASA CP-10124, E-8172. |
| 1993 |
J. Gardner, notes by R.C. Hendricks, “Compliant Seal Development,” pp. 171–195 of “Seals Flow Code Development 92,” Cleveland, OH, August 5–6, 1992, NASA CP-10124, E-8172. |
| 1993 |
J. Derby, summary by R.C. Hendricks, “Tribopair Evaluation of Materials for Brush Seal Applications,” pp. 245–246 of “Seals Flow Code Development 92,” Cleveland, OH, August 5–6, 1992, NASA CP-10124, E-8172. |
| 1993 |
Proceedings of the “Seals Flow Code Development 92,” workshop held in Cleveland, OH, August 5–6, 1992, Cover, Table of Contents, Summary and RDP only, NASA CP-10124, E-8172. |
| 1993 |
R.C. Hendricks, J.A. Carlile, A.D. Liang, “Some Sealing Concepts—A Review—Part A: Industrial, Proposed, and Dynamic,” 4th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), Honolulu, HI, April 5–8, 1992, vol. 1, pp. 204–221. |
| 1993 |
R.C. Hendricks, J.A. Carlile, A.D. Liang, “Some Sealing Concepts—A Review—Part B: Brush Seals Systems,” 4th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), Honolulu, HI, April 5–8, 1992, vol. 1, pp. 222–233. |
| 1993 |
R.C. Hendricks, J.A. Carlile, D. Yoder, M.J. Braun, "Investigation of Flows in Bristle and Fiberglass Brush Seal Configuratiohns," 4th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), Honolulu, HI, April 5–8, 1992, vol. 1, pp. 272–282. |
| 1993 |
M.J. Braun, Q. Dong, F.K. Choy, R.C. Hendricks, "A Study of Flow in a Shear Layer Driven Cavity with a Penetrating Jet," 4th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), Honolulu, HI, April 5–8, 1992, vol. 1, pp. 303–312. |
| 1993 |
M.M. Athavale, A.J. Przekwas, R.C. Hendricks, “A Numerical Study of the Flow Fields in Enclosed Turbine Disk Cavities in Gas Turbine Engines,” 4th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), Honolulu, HI, April 5–8, 1992, vol. 1, pp. 92–101. |
| 1993 |
M.J. Braun, V.A. Canacci, M. Kazmierchak, R.C. Hendricks, “Flow Visualization in a Single Simulated Brush Seal,” Proceedings of the 3rd International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, HI, April 1–4, 1990. |
| 1993 |
J.R. Fowler, R.C. Hendricks, “Computing Properties of Pure and Mixed Fluids,” July 1993 Tech Brief. |
| 1993 |
R.C. Hendricks, J.A. Carlile, A.D. Liang, “Brush Seal Low Surface Speed Hard-Rub Characteristics,” 29th Joint Propulsion Conference and Exhibit, AIAA, SAE, ASME, ASEE, Monterey, CA, June 28–30, 1993, NASA TM-106169, E-7868. |
| 1993 |
J.A. Carlile, R.C. Hendricks, R.I. Hibbs, S.E. McVey, J.K. Scharrer, “Preliminary Experimental Results for a Cryogenic Brush Seal Configuration,” AIAA, SAE, ASME, ASEE 29th Joint Propulsion Conference, June 28–30, 1993, Monterey, CA, AIAA–93–2535, NASA TM-106236, E-7952. |
| 1994 |
R.C. Hendricks, T.A. Griffin, T.R. Kline, K.R. Csavina, A. Pancholi, D. Sood, “Relative Performance Comparison Between Baseline Labyrinth and Dual Brush Compressor Discharge Seals in a T-700 Engine Test,” ASME Intl Gas Turbine and Aeroengine Congress and Exposition, The Hague, Netherlands, June 13–16, 1994, 94-GT-266. |
| 1994 |
R.C. Hendricks, B. O’Halloran, G. Arora, H.E. Addy, J. Flowers, J. Carlile, B.M. Steinetz, “Advances in Contact Sealing,” Advanced Earth-to-Orbit Propulsion Technology Conference, Marshall Space Flight Center, Huntsville, AL, May 16–19, 1994. |
| 1994 |
A.J. Przekwas, M.M. Athavale, R.C. Hendricks, “Progress in Advanced Modeling of Turbine Engine Seal Flows,” 30th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Indianapolis, IN, June 27–29, 1994, AIAA–94–2803. |
| 1994 |
R.C. Hendricks, T.A. Griffin, G.A. Bobula, R.C. Bill, D.R. Hull, K.R. Csavina, “Some Metallographic Results for Brush Bristles and Brush Segments of a Shroud Ring Brush Seal Tested in a T-700 Engine,” pp. 325–366 from “Seals Flow Code Development-93,” Cleveland, OH, November 3–4, 1993, NASA CP-10136, E-8643. |
| 1994 |
R.C. Hendricks, “Environmental and Customer-Driven Seal Requirements,” pp. 67–78 from “Seals Flow Code Development-93,” Cleveland, OH, November 3-4, 1993, NASA CP-10136, E-8643. |
| 1994 |
R.C. Hendricks, R. Flower, H. Howe, “Development of a Brush Seals Program Leading to Ceramic Brush Seals,” pp. 99–117 from “Seals Flow Code Development-93,” Cleveland, OH, November 3–4, 1993, NASA CP-10136, E-8643. |
| 1994 |
A.D. Liang, R.C. Hendricks, “Seals Flow Code Development 1993,” Cleveland, OH, November 3–4, 1993, Cover, Table of Contents, Preface and Overview only, NASA CP-10136, E-8643. |
| 1994 |
M.M. Athavale, A.J. Przekwas, R.C. Hendricks, “A 3D-CFD Code for Accurate Prediction of Fluid Flows and Fluid Forces in Seals,” pp. 137–147 within “Rotordynamic Instability Problems in High-Performance Turbomachinery 1993,” College Station, TX, CP-3239, E-8199. |
| 1994 |
Proceedings of the “Rotordynamic Instability Problems in High-Performance Turbomachinery 1993” workshop held in College Station, TX, Cover, Preface, and RDP only, NASA CP-3239, E-8199. |
| 1994 |
R.C. Hendricks, “GASP-Thermodynamic and Transport Properties of Helium, Methane, Neon, Nitrogen, Carbon Monoxide, Carbon Dioxide, Oxygen, and Argon,” January 1, 1994, library reference 94M10411. |
| 1994 |
R.C. Hendricks, T.A. Griffin, G.A. Bobula, R.C. Bill, D.R. Hull, K.R. Csavina, “Metallographic Analysis of Brush Bristle and Integrity Testing of Brush Seal in Shroud Ring of T-700 Engine,” 5th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Pacific Center of Thermal Fluids Engineering, Kaanapali, Maui, HI, May 8–11, 1994, TM-106361, E-8155. |
| 1994 |
R.C. Hendricks, “Brush Seal Performance and Durability Issues Based on T-700 Engine Test Results,” March 1994, NASA TM-106502, E-8520. |
| 1994 |
B.M. Steinetz, R.C. Hendricks, “Engine Seal Technology Requirements to Meet NASA’s Advanced Subsonic Technology Program Goals,” 30th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Indianapolis, IN, June 27–29, 1994, AIAA–94–2698, NASA TM-106582, E-9715. |
| 1994 |
M.M. Athavale, A.J. Przekwas, R.C. Hendricks, B.M. Steinetz, “Comparison of Numerical Results and Multicavity Purge and Rim Seal Data With Extensions to Dynamics,” 3rd Northern Ohio Technical Symposium “Aerospace Today,” AIAA, Cleveland, OH, May 16, 1994, NASA TM-106685, E-9039. |
| 1995 |
M.M. Athavale, Y.-H. Ho, J.M. Forry, J.H. Munson, R.C. Hendricks, B.M. Steinetz, “Simulation of Secondary Flow In Gas Turbine Disc Cavities and Interaction with the Main Flow Path,” 31st Joint Propulsion Conference, AIAA, ASME, SAE, ASEE, San Diego, CA, July 10–12, 1995, AIAA–95–2620. |
| 1995 |
H.E. Addy, Jr., H.W. Howe, J. Flowers, B.M. Steinetz, R.C. Hendricks, “Preliminary Results of Silicon Carbide Brush Seal Testing at NASA Lewis Research Center,” 31st Joint Propulsion Conference, AIAA, ASME, SAE, ASEE, July 10, 1995. |
| 1995 |
R.C. Hendricks, “Brush Seal Performance and Durability Issues Based on T-700 Engine Test Results,” International Journal of Rotating Machinery, Overseas Publishers Association under license from Gordon and Breach Publishers SA, 1995, vol. 1, no. 2, pp. 117–128. |
| 1995 |
R.C. Hendricks, B.M. Steinetz, M.M. Athavale, A.J. Przekwas, M.J. Braun, M.I. Dozozo, F.K. Choy, V.V. Kudriavtsev, R.L. Mullen, G.L. Von Pragenau, “Interactive Development of Seals, Bearings, and Secondary Flow Systems with the Power Stream,” International Journal of Rotating Machinery, 1995, vol. 1, no. 3–4, pp. 153–185, printed in Singapore and Malaysia, Overseas Publishers Association under license from Gordon and Breach Publishers SA. |
| 1995 |
R.C. Hendricks, B.M. Steinetz, M.M., Athavale, A.J. Przekwas, M.J. Braun, M.I. Dozozo, F.K. Choy, V.V. Kudriavtsev, R.L. Mullen, G.L. von Pragenau, “Interactive Development of Seals, Bearings, and Secondary Flow Systems with the Power Stream,” Never published as NASA TM-106533, E-8668, cancelled. |
| 1995 |
R.C. Hendricks, T.A. Griffin, T.R. Kline, K.R. Csavina, A. Pancholi, D. Sood, “Relative Performance Comparison Between Baseline Labyrinth and Dual-Brush Compressor Discharge Seals in a T-700 Engine Test,” 39th International Gas Turbine and Aeroengine Congress and Exposition sponsored by the American Society of Mechanical Engineers, The Hague, Netherlands, June 13–16, 1994, NASA TM-106360, ARL–MR–232, E-8154. |
| 1995 |
M.M. Athavale, A.J. Przekwas, R.C. Hendricks, B.M. Steinetz, “Numerical Analysis of Intra-Cavity and Power-Stream Flow Interaction in Multiple Gas-Turbine Disk-Cavities,” Turbo Expo 95, ASME, Houston, TX, June 5–8, 1995, NASA TM-106886, E-9523. |
| 1995 |
M.M. Athavale, R.C. Hendricks, B.M. Steinetz, “Numerical Simulation of Flow in a Whirling Annular Seal and Comparison With Experiments,” NASA TM-106961, E-9715. |
| 1996 |
Y.-H. Ho, M.M. Athavale, J.M. Forry, R.C. Hendricks,and B.M. Steinetz, “Numerical Simulation of Secondary Flow in Gas Turbine Disc Cavities, Including Conjugate Heat Transfer,” ASME Journal, 96-GT-67, pp. |
| 1996 |
M.M. Athavale, Y.-H. Ho, J.M. Forry, R.C. Hendricks, “Simulation of Power-Stream and Turbine Disc Cavity Flow Interaction Under Transient Conditions,” AIAA-96-3305, 32nd AIAA, ASME, SAE, and ASEE Joint Propulsion Conference and Exhibit, Lake Buena Vista, FL, July 1–3, 1996. |
| 1996 |
F. Dimofte, R.C. Hendricks, “Fractional Whirl Motion in Wave Journal Bearings,” pp. 337–340 in “Seals Code Development Workshop,” Cleveland, OH, June 14–15, 1995, NASA CP-10181, E-9945. |
| 1996 |
B.M. Steinetz, R.C. Hendricks, “Aerospace Seal Requirements,” pp. 41–53 in “Seals Code Development Workshop,“ Cleveland, OH, June 14–15, 1995, NASA CP-10181, E-9945. |
| 1996 |
R.C. Hendricks, “Turbomachine Sealing,” Overview, pp. 5–40 within “Seals Code Development Workshop,” Cleveland, OH, June 14–15, 1995, NASA CP-10181, E-9945. |
| 1996 |
“Seals Code Development Workshop,” Cleveland, OH, June 14–15, 1995, Cover, Preface, Table of Contents, and RDP only, NASA CP-10181, E-9945. |
| 1996 |
F.K. Choy, R.J. Veillete, V. Polyshchuk, M.J. Braun, R.C. Hendricks, “Quantification of Gear Tooth Damage by Optimal Tracking of Vibration Signatures,” 6th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Pacific Center of Thermal Fluids Engineering and the U.S. Turbo and Power Machinery Research Center, Honolulu, HI, February 25–29, 1996, NASA TM-107100, E-10029. |
| 1996 |
R.C. Hendricks, M.M. Athavale, Y.H. Ho, J.M. Forry, B.M. Steinetz, K.R. Csavina, “Multiply Connected Cavity Flows in Turbomachines,” 6th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Pacific Center of Thermal Fluids Engineering and the U.S. Turbo and Power Machinery Research Center, Honolulu, HI, February 25–29, 1996, NASA TM-107116, E-10025. |
| 1996 |
M.M. Athavale, R.C. Hendricks, B.M. Steinetz, “Numerical Simulation of Flow in a Whirling Annular Seal and Comparison With Experiments,” 6th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Pacific Center of Thermal Fluids Engineering and the U.S. Turbo and Power Machinery Research Center, Honolulu, HI, February 25–29, 1996, NASA TM-107117, E-10026. |
| 1996 |
R.C. Hendricks, R. Flower, H. Howe, “A Brush Seals Program Modeling and Developments,” 9th International Symposium on Transport Phenomena in Thermal-Fluids Engineering sponsored by the Pacific Centre, of Thermal Fluids Engineering, Singapore, Republic of Singapore, June 25–28, 1996, NASA TM-107158, E-10103. |
| 1996 |
R.C. Hendricks, V.V. Kudriavtsev, M.J. Braun, M.M. Athavale, “Flows in Pinned Arrays Simulating Brush Seals,” International Congress on Fluid Dynamics and Propulsion, ASME and Cairo University, Cairo, Egypt, December 29–31, 1996, NASA TM-107333, E-10459. |
| 1997 |
M.M. Athavale, A.J. Przekwas, R.C. Hendricks, B.M. Steinetz, “Development of a Coupled, Transient Simulation Methodology for Interaction Between Primary and Secondary Flowpaths in Gas Turbine Engines,” AIAA-97–2727, 33rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Seattle, WA, July 6–9, 1997. |
| 1997 |
R.C. Hendricks, B.M. Steinetz, Cover, Foreword, Table of Contents, and RDP only, within “Seals/Secondary Flows Workshop 1996,” Cleveland, OH, October 23–24, 1996, NASA/CP—1997-10198, vol. 1, E-10936. LIMITED DISTRIBUTION: Available Only With Approval of Issuing Office. |
| 1997 |
F.K. Choy, R.J. Veillette, V. Polyshchuk, M.J. Braun, R.C. Hendricks, “Quantification of Gear Tooth Damage by Optimal Tracking of Vibration Signatures,” pp. 775–791 of “Seals/Secondary Flows Workshop 1996,” Cleveland, OH, October 23–24, 1996, NASA/CP—1997-10198, vol. 2, E-10936. LIMITED DISTRIBUTION: Available Only With Approval of Issuing Office. |
| 1997 |
F. Dimofte, R.C. Hendricks, T.G. Keith, Jr., “Gas Journal Bearing Stability Versus Amplitude Ratio,” pp. 855-864 of “Seals/Secondary Flows Workshop 1996,” Cleveland, OH, October 23–24, 1996, NASA/CP—1997-10198, vol. 2, E10936. LIMITED DISTRIBUTION: Available Only With Approval of Issuing Office. |
| 1997 |
R.C. Hendricks, B.M. Steinetz, M.M. Athavale, A.J. Przekwas, “Seals/Secondary Flows: Selected NASA LeRC Results With Emphasis on CFD,” pp. 865–955 of “Seals/Secondary Flows Workshop 1996,” Cleveland, OH, October 23–24, 1996, NASA/CP—1997-10198, vol. 2, E-10936. LIMITED DISTRIBUTION: Available Only With Approval of Issuing Office. |
| 1997 |
M.M. Athavale, R.C. Hendricks, “Seal Leakages for Honeycomb or Smooth Configurations,” pp. 281–291 within “Rotordynamic Instability Problems in High Performance Turbomachinery 1996,” College Station, TX, May 6–8, 1996, NASA/CP—1997-3344, E-10502. |
| 1997 |
F. Dimofte, R.C. Hendricks, “Three-Wave Gas Journal Bearing Behavior with Shaft Runout,” pp. 3–11 of “Rotordynamic Instability Problems in High Performance Turbomachinery 1996,” College Station, TX, May 6–8, 1996, NASA/CP—1997-3344, E-10502. |
| 1997 |
”Rotordynamic Instability Problems in High Performance Turbomachinery 1996,” College Station, TX, May 6–8, 1996, Cover, Preface, Table of Contents, and RDP only of NASA/CP—1997-3344, E-10502. |
| 1997 |
F.K. Choy, R.J. Veillete, V. Polyshchuk, M.J. Braun, R.C. Hendricks, “Quantification of Gear Tooth Damage by Optimal Tracking of Vibration Signatures,” International Journal of Rotating Machinery, Overseas Publishers Association under License by Gordon and Breach Science Publishers, 1997, vol. 3, no. 3, pp. 143–151. |
| 1997 |
R.C. Hendricks, J. Wilson, T. Wu, R. Flower, “Bidirectional Brush Seals,” Turbo Expo ‘97, ASME, Orlando, FL, June 5–7, 1997, NASA/TM—1997-107351, E-10519. |
| 1997 |
R.C. Hendricks, M.M. Athavale, M.J. Braun, S. Lattime, “Numerical Flow Visualization in Basic- and Hyper-Cluster Spheres,” 1st Pacific Symposium on Flow Visualization and Image Processing, Pacific Center of Thermal-Fluids Engineering, Honolulu, HI, February 23–26, 1997, NASA/TM—1997-107361, E-10521-1. |
| 1997 |
R.C. Hendricks, S. Lattime, M.J. Braun, M.M. Athavale, “Experimental Visualization of Flows in Packed Beds of Spheres,” 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery cosponsored by the Pacific Center of Thermal Fluids Engineering and the U.S. Turbo and Power Machinery Research Center, Honolulu, HI, February 22–26, 1998, NASA/TM—1997-107365, E-10527-1. |
| 1997 |
R.C. Hendricks, J. Wilson, T.Y. Wu, R. Flower, R.L. Mullen, “Bidirectional Brush Seals—Post-test Analysis,” 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery cosponsored by the Pacific Center of Thermal Fluids Engineering and the U.S. Turbo and Power Machinery Research Center, Honolulu, HI, February 22–26, 1998, NASA/TM—1998-107501, E-10803. |
| 1998 |
S.B. Lattime, M.J. Braun, F.K. Choy, R.C. Hendricks, B.M. Steinetz, “Advances in Hybrid Floating Brush Seals,” AIAA–98–3171, 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Cleveland, OH, July 13–15, 1998. |
| 1998 |
M.M. Athavale, A.J. Przekwas, H.-Y. Li, R.C. Hendricks, B. Steinetz, “Coupled, Transient Simulations of the Interaction Between Power and Secondary Flowpaths in Gas Turbines,” 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Cleveland, OH, July 13–15, 1998, AIAA–98–3290. |
| 1998 |
Athavale, Mahesh M., Vaidya, N., Hendricks, Robert C., and Steinetz, Bruce M., "A Computational Study of Turbulent Flow and Heat Transfer in Rotating Disc Cavities," presented at the Seventh International Symposium on Transport Phenomena and Dynamics of Rotative Machinery (ISROMAC-7) February 22-26, 1998, Honolulu, Hawaii. |
| 1998 |
B.M. Steinetz, R.C. Hendricks, J. Munson, “Advanced Seal Technology Role in Meeting Next Generation Turbine Engine Goals,” Propulsion and Power Systems First Meeting on Design Principles and Methods for Aircraft Gas Turbine Engines sponsored by the NATO Research and Technology Agency, Toulouse, France, May 11–15, 1998, AVT-PPS-Paper no. 11, NASA/TM—1998-206961, E-11109. |
| 1998 |
R.C. Hendricks, M.M. Athavale, S.B. Lattime, M.J. Braun, “Virtual and Experimental Visualization of Flows in Packed Beds of Spheres Simulating Porous Media Flows,” 8th International Symposium on Flow Visualization cosponsored by the Universita di Napoli and Heriot Watt University, Sorrento, Italy, September 1–4, 1998, NASA/TM—1998-207926, E-11214. |
| 1999 |
S.B. Lattime, M.J. Braun, F.K. Choy, R.C. Hendricks, B.M. Steinetz, “Continued Evaluation of the Hybrid Floating Brush Seals (HBFS),” AIAA–99–2688, 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Cleveland, OH, June 20–23, 1999. |
| 1999 |
M.M. Athavale, A.J. Przekwas, H.-Y. Li, R. Hendricks, B. Steinetz, “Coupled Transient Simulations of the Interactions Between Power and Secondary Flowpaths in Gas Turbines,” pp. 309–344 in “1998 NASA Seal/Secondary Air System Workshop,” Cleveland, OH, October 22–23, 1998, NASA/CP—1999-208916, vol. 1, E-11666. |
| 1999 |
Cover, Executive Summary, Table of Contents, and RDP only, “1998 NASA Seal/Secondary Air System Workshop,” Cleveland, OH, October 22–23, 1998, NASA/CP—1999–208916, vol. 1, E–11666. |
| 1999 |
R.C. Hendricks, J. Wilson, T.Y. Wu, R. Flower, R.L. Mullen, “Bidirectional Brush Seals—Post-test Analysis,” International Journal of Rotating Machinery, Overseas Publishers Association under License by Gordon and Breach Science Publishers, 1999, vol. 5, no. 3, pp167–180, E-10803-2. |
| 1999 |
R.C. Hendricks, M.J. Braun, D. Peloso, M.M. Athavale, R.L. Mullen, “Visualization of Flows in Packed Beds of Twisted Tapes,” Second Pacific Symposium on Flow Visualization and Image Processing, May 16, 1999, unedited presentation, E-11550. |
| 2000 |
B.M. Steinetz, R.C. Hendricks, Cover, Table of Contents, Overview pp. 1–17, and RDP only of “1999 NASA Seal/Secondary Air System Workshop,” Cleveland, OH, October 28–29, 1999, NASA/CP—2000-210472, vol. 1, E-12467-1. |
| 2000 |
F.K. Choy, S.B. Lattime, M.J. Braun, B.M. Steinetz, R.C. Hendricks, “Continued Evaluation of the Hybrid Floating Brush Seal (HFBS),” pp. 365–394 of “1999 NASA Seal/Secondary Air System Workshop,” Cleveland, OH, October 28–29,1999, NASA/CP—2000-210472, vol. 1, E-12467-1. |
| 2000 |
M.M. Athavale, A.J. Przekwas, R.C. Hendricks, B.M. Steinetz, “A Simulation Methodology for Transient Solutions of Primary-Secondary Flows in Gas Turbines,” pp. 1–18 of “1999 NASA Seal/Secondary Air System Workshop,” Cleveland, OH, October 28–29,1999, NASA/CP—2000-210472, vol. 2, E-12467-2 (ITAR). |
| 2001 |
B.M. Steinetz, R.C. Hendricks, with contributions by M. Proctor, P. Dunlap and I. Delgado, “Overview of NASA Glenn Seal Development Program,” pp. 1–21 of “2000 NASA Seal/Secondary Air System Workshop,” Cleveland, OH, October 25–26, 2000, NASA/CP—2001-21120, vol. 1, E-13062-1. |
| 2001 |
R.C. Hendricks, E.V. Zaretsky, “Design of Critical Components,“ pp. 29–32 of “2000 NASA Seal/Secondary Air System Workshop,” Cleveland, OH, October 25–26, 2000, NASA/CP—2001-211208, vol. 1, E-13062-1. |
| 2001 |
M.M. Athavale, B.M. Steinetz, R.C. Hendricks, “Coupled Main/Cavity Flow Calculations Using TURBO/SCISEAL,” pp. 43–60 of “2000 NASA Seal/Secondary Air System Workshop,” Cleveland, OH, October 25–26, 2000, NASA/CP—2001-211208, vol. 2, E-13062-2. (ITAR) |
| 2001 |
R.C. Hendricks, D.T. Shouse, W.M. Roquemore, D.L. Burns, B.S. Duncan, R.C. Ryder, A. Brankovic, N.-S. Liu, J.R. Gallagher, J.A. Hendricks, “Experimental and Computational Study of Trapped Vortex Combustor Sector Rig With Tri-Pass Diffuser,” submitted to the International Journal of Rotating Machinery special issue dedicated to the 70th birthday of Professor W.-J. Yang, E-12988. |
| 2002 |
E.V. Zaretsky, R.C. Hendricks, S.M. Soditus, “Effect of Individual Component Life Distribution on Engine Life Prediction,” ASTM Meeting, Miami Beach, FL, November 6–7, 2002. |
| 2002 |
"2001 NASA Seal/Secondary Air System Workshop," proceedings of a conference held at and sponsored by NASA Glenn Research Center, Cleveland, Ohio, October 30–31, 200, Bruce M. Steinetz and Robert C. Hendricks, editors, NASA/CP—2002-211911-VOL1. |
| 2002 |
"2001 NASA Seal/Secondary Air System Workshop," proceedings of a conference held at and sponsored by NASA Glenn Research Center, Cleveland, Ohio, October 30–31, 200, Bruce M. Steinetz and Robert C. Hendricks, editors, NASA/CP—2002-211911-VOL2. (ITAR) |
| 2002 |
M. Athavale, R.C. Hendricks, B.M. Steinetz, “Gas Turbine Primary-Secondary Flowpath Interaction: Transient, Coupled Simulations and Comparisons With Experiments,” 2001 NASA Seal/Secondary Air System Workshop,“ Cleveland, OH, October 30–31, 2001, pp. 45–77, NASA/CP—2002-211911, vol. 2, E-13604-2. (ITAR/EAR) |
| 2002 |
R.C. Hendricks, M.J. Braun, D. Peloso, M.M. Athavale, R.L. Mullen, “Visualization of Flows in Packed Beds of Twisted Tapes,” 2nd Pacific Symposium on Flow Visualization and Image Processing, May 16, 1999, NASA/TM—2002-208914, E-11550-1. |
| 2002 |
F. Dimofte, R.C. Hendricks, “Wave Journal Bearings Under Dynamic Loads,” 56th Annual Meeting and Exhibit, STLE, Orlando, FL, May 20–24, 2001, NASA/TM—2002-211079, E-12918. |
| 2002 |
A. Brankovic, R.C. Ryder, Jr., R.C. Hendricks, N.-S. Liu, J.R. Gallagher, D.T. Shouse, W.M. Roquemore, “Measurement and Computation of Supersonic Flow in a Lobed Diffuser-Mixer for Trapped Vortex Combustors,” 19th International Congress on Instrumentation in Aerospace Simulation Facilities (ICIASF 2001), IEEE, AES, NASA Glenn Research Center, and OAI, Cleveland, OH, August 27–30, 2001, NASA/TM—2002-211127, E-11286-1. |
| 2002 |
E.V. Zaretsky, R.C. Hendricks, S. Soditus, “Weibull-Based Design Methodology for Rotating Aircraft Engine Structures,” 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ASME, Honolulu, HI, February 10–14, 2002, NASA/TM—2002-211348, E-13091. |
| 2002 |
B.L. Vlcek, R.C. Hendricks, E.V. Zaretsky, M. Savage, “Comparative Fatigue Lives of Rubber and PVC Wiper Cylindrical Coatings,” 2002 Annual Meeting of the STLE, Houston, TX, May 19–23, 2002, NASA/TM—2002-211819, E-13196. |
| 2003 |
"2002 NASA Seal/Secondary Air System Workshop," proceedings of a conference held at Ohio Aerospace Institute sponsored by NASA Glenn Research Center, Cleveland, Ohio, October 23–24, 2002, Bruce M. Steinetz and Robert C. Hendricks, editors, NASA/CP—2003-212458/VOL1. |
| 2003 |
"2002 NASA Seal/Secondary Air System Workshop," proceedings of a conference held at Ohio Aerospace Institute sponsored by NASA Glenn Research Center, Cleveland, Ohio, October 23–24, 2002, Bruce M. Steinetz and Robert C. Hendricks, editors, NASA/CP—2003-212458/VOL2. (ITAR) |
| 2003 |
E.V. Zaretsky, R.C. Hendricks, S. Soditus, “Weibull-Based Design Methodology for Rotating Aircraft Engine Structures,” International Journal of Rotating Machinery, Taylor & Francis Publishers, vol. 9, pp. 313-325. |
| 2003 |
R.C. Hendricks, B.M. Steinetz, "Reviewing Turbomachine Sealing and Secondary Flows Part A: Customer, Designer, and Research Issues," prepared for ISCORMA-2, Gdansk, Poland, August 4–8, 2003. |
| 2003 |
R.C. Hendricks, L.T. Tam, A. Muszynska, "Reviewing Turbomachine Sealing and Secondary Flows Part B: Rotordynamics Issues in Flow Systems with Small Clearances," prepared for ISCORMA-2, Gdansk, Poland, August 4–8, 2003. |
| 2003 |
R.C. Hendricks, B.M. Steinetz, E.V. Zaretsky, M.M. Athavale, A.J. Przekwas, "Reviewing Turbomachine Sealing and Secondary Flows Part C: Powerstream Component Support Issues," prepared for ISCORMA-2, Gdansk, Poland, August 4–8, 2003. |
| 2003 |
B.L. Vlcek, R.C. Hendricks, E.V. Zaretsky, "Determination of Rolling-Element Fatigue Life From Computer Generated Bearing Tests," Prepared for the2003 Annual Meeting and Exhibition sponsored by the Society of Tribologists and Lubrication Engineers New York City, New York, April 28–May 1, 2003, NASA/TM—2003-212186. |
| 2003 |
B.L. Vlcek, R.C. Hendricks, E.V. Zaretsky, "Monte Carlo Simulation of Sudden Death Bearing Testing," prepared for the International Joint Tribology Conference cosponsored by the Society of Tribologists and Lubrication Engineers and the Tribology Division of the American Society of Mechanical Engineers International Ponte Vedra, Florida, October 27–29, 2003, NASA/TM—2003-212506. |
| 2003 |
E.V. Zaretsky, R.C. Hendricks, S. Soditus, "Effect of Individual Component Life Distribution on Engine Life Prediction," prepared for the Symposium on Probabilistic Aspects of Life Predictions sponsored by the ASTM Committee E08 on Fatigue and Fracture Miami Beach, Florida, November 6–7, 2002, NASA/TM—2003-212532. |
| 2004 |
Vlcek, B.L., Hendricks, R.C., and Zaretsky, E.V. ( 2004) Monte Carlo Simulation of Testing of Angular Contact Bearings Used In Rotating Machines, The 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery Honolulu, Hawaii, 7-11 March, 2004, ISROMAC-10-Paper 2004-109. |
| 2004 |
Daggett, D.L., Fucke, L., Hendricks, R.C., Eames, D.J.H. (2004) Water Injection of Commercial Aircraft to Reduce Airport NOx AIAA 2004-4198. |
| 2004 |
"2003 NASA Seal/Secondary Air System Workshop," proceedings of a conference held at Ohio Aerospace Institute sponsored by NASA Glenn Research Center, Cleveland, Ohio, November 5–6, 2003, B.M. Steinetz, and R.C. Hendricks, editors, NASA/CP—2004-212963/VOL1. |
| 2004 |
"2003 NASA Seal/Secondary Air System Workshop," proceedings of a conference held at Ohio Aerospace Institute sponsored by NASA Glenn Research Center, Cleveland, Ohio, November 5–6, 2003, B.M. Steinetz, and R.C. Hendricks, editors, NASA/CP—2004-212963/VOL2. (ITAR) |
| 2004 |
Hendricks, R.C., Ryder, R.C., Brankovic, A., Shouse, D.T., Roquemore, W.M. and Liu, N.-S. ( 2004) Computational Parametric Study of Fuel Distribution of an Experimental Trapped Vortex Combustor Sector Rig, To be presented ASME/IGTI Turbo Expo, Vienna, Austria, June14-17. |
| 2004 |
Hendricks, R.C., Liu, N-S, Gallagher, J.R., Ryder, R.C., Brankovic, A. and Hendricks, J.A. (2004) Modeling of a Sequential Two-Stage Combustor, The 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery Honolulu, Hawaii, 7-11 March, 2004, ISROMAC-10-Paper 2004-037. |
| 2004 |
Hendricks, R.C. and Mullen, R.L. (2004) Torque Transmission Device at Zero Leakage, The 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery Honolulu, Hawaii, 7-11 March, 2004, ISROMAC-10-Paper 2004-038. (See TM-2005-212693) |
| 2004 |
Hendricks, R.C., Shouse, D.T. and Roquemore, W.M. (2004) Water Injected Turbomachinery, The 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery Honolulu, Hawaii, 7-11 March, 2004, ISROMAC-10-Paper 2004-039. (See TM-2005-212632) |
| 2004 |
R.C. Hendricks, B.M. Steinetz, and M.J. Braun, "Turbomachine Sealing and Secondary Flows Part 1—Review of Sealing Performance, Customer, Engine Designer, and Research Issues," NASA TM—2004-211991-PART1. |
| 2004 |
R.C. Hendricks, L.T. Tam, and A. Muszynska, "Turbomachine Sealing and Secondary Flows Part 2—Review of Rotordynamics Issues in Inherently Unsteady Flow Systems With Small Clearances," NASA/TM—2004-211991/PART2. |
| 2004 |
Hendricks, R.C., Steinetz, B.M., Zaretsky E.V., Athavale, M.M., and Przekwas, A.J., " Turbomachine Sealing and Secondary Flows Part 3—Review of Power-Stream Support, Unsteady Flow Systems, Seal and Disk Cavity Flows, Engine Externals, and Life and Reliability Issues," NASA/TM—2004-211991/PART3. |
| 2004 |
R.C. Hendricks, D.T. Shouse, W.M. Roquemore, D.L. Burns, B.S. Duncan, R.C. Ryder, A. Brankovic, N.-S. Liu, J.R. Gallagher, J.A. Hendricks, “Experimental and Computational Study of Trapped Vortex Combustor Sector Rig With Tri-Pass Diffuser,” NASA/TM—2004-212507. |
| 2004 |
Zaretsky, E.V., Vlcek, B.L. and Hendricks, R.C. (2004) Effect of Silicon Nitride Balls and Rollers on Rolling Bearing Life, ASME/STLE International Joint Tribology Conference, Long Beach CA, October 24-27. |
| 2005 |
Brankovic, A., Ryder, R.C., Jr., Hendricks, R.C., Nan-Suey Liu, Shouse, D.T., Roquemore, W.M., Emissions Prediction and Measurement for Liquid Fueled TVC Combustor With and Without Water Injection, AIAA-2005-0215, 43rd AIAA Aerospace Sciences Meeting and Exhibit 10-13 January 2005, Reno, Nevada. (TM-2005-213441) |
| 2005 |
"2004 NASA Seal/Secondary Air System Workshop," proceedings of a conference held at Ohio Aerospace Institute sponsored by NASA Glenn Research Center, Cleveland, Ohio, November 9–10, 2004, B.M. Steinetz, and R.C. Hendricks, editors, NASA/CP—2004-212963/VOL1. |
| 2005 |
"2004 NASA Seal/Secondary Air System Workshop," proceedings of a conference held at Ohio Aerospace Institute sponsored by NASA Glenn Research Center, Cleveland, Ohio, November 9–10, 2004, B.M. Steinetz, and R.C. Hendricks, editors, NASA/CP—2004-212963/VOL1. (ITAR/EAR) |
| 2005 |
Moraru, L., Dimofte, F., Hendricks, R.C. (2006) Free Body Dynamics of a Spinning Cylinder with Planar Restraint –(A.K.A. Barrel of Fun), Proceedings of the 3rd International Symposium on Stability Control of Rotating Machinery, ISCORMA-3, Cleveland, Ohio, 19-23 Sept. 2005, pp. 63-73. |
| 2005 |
Daggett, D.L., Hendricks, R.C., Mahashabde, A., Waitz, I.A. (2005) Water Injection – Could it Reduce Airplane Maintenance Costs and Airport Emissions? Proceedings XVII International Symposium on Air Breathing Engines, Paper ISABE 2005-1249, Sept. 4-9, Munich Germany. |
| 2005 |
Hendricks, R.C., Liu, N-S., Gallagher, J.R., Ryder, R.C., Brankovic, A., Hendricks, J.A., (2005) Modeling of a Sequential Two-Stage Combustor, NASA TM 2005-212631. |
| 2005 |
Hendricks, R.C., Shouse, D.T. and Roquemore, W.M. (2005) Water Injected Turbomachinery, The 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery Honolulu, Hawaii, 7-11 March, 2004, TM-2005-212632 (see ISROMAC-10-2004-39). |
| 2005 |
Hendricks, R.C. and Mullen, R.L. (2004) Torque Transmission Device at Zero Leakage, The 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery Honolulu, Hawaii, 7-11 March, 2004, TM-2005-212693 (ISROMAC-10-2004-038). |
| 2005 |
Zaretsky, E.V., Vlcek, B.L., Hendricks, R.C., (2005) Effect of Silicon Nitride Balls and Rollers on Rolling Bearing Life, NASA TM 2005-213061. |
| 2005 |
Hendricks, R.C. Chupp, R.E., Lattime, S.B., Steinetz, B.M. (2005) Turbomachines Interface Sealing, International Conference on Metallurgical Coatings and Thin Films (sponsored by AVS Science and Technology) San Diego CA May 2-6, NASA TM 2005-213633. |
| 2006 |
Hendricks, R.C., Braun, M.J., Deng, D., Hendricks, J.A. (2006) Compliant Turbomachine Sealing, Paper 54-ISROMAC-11, Proceedings of ISROMAC-11: The Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, Feb 26-Mar 2 2006. |
| 2006 |
Vlcek, B.L., Hendricks, R.C., Zaretsky, E.V., Parker, J. (2006) Experimental Determination of Fatigue Lives of Rotating Aluminum Alloys Using Weibull Analysis, Paper 125-ISROMAC-11 Proceedings of ISROMAC-11: The Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, Feb 26-Mar 2 2006. |
| 2006 |
Moraru, L., Dimofte, F., Hendricks, R.C. (2006) Free Body Dynamics of a Spinning Cylinder with Planar Restraint –(A.K.A. Barrel of Fun) – Part II, Paper 138-ISROMAC-11, Proceedings of ISROMAC-11: The Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, Feb 26-Mar 2 2006. |
| 2006 |
Hendricks, R.C., Lowery, N., Daggett, D.L., Anast, P. (2006) Future Fuel Scenarios and Their Potential Impact to Aviation, Paper 139-ISROMAC-11, Proceedings of ISROMAC-11: The Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, Feb 26-Mar 2 2006. |
| 2006 |
Hendricks, R.C., Dimofte, F., Chupp, R.E., Steinetz, B.M. (2006) Interfaces – Weak Links, Yet Great Opportunities, Paper 140-ISROMAC-11, Proceedings of ISROMAC-11: The Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, Feb 26-Mar 2 2006. |
| 2006 |
Hendricks, R.C., Daggett, D.L., Shouse, D.T., Roquemore, W. M., Brankovic, A., Ryder, R.C. Jr. (2006) Can Water-Injected Turbomachines Provide Cost-Effective Emissions and Maintenance Reductions? Paper 141-ISROMAC-11Proceedings of ISROMAC-11: The Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, Feb 26-Mar 2 2006. |
| 2006 |
Chupp, R.E., Hendricks, R.C., Lattime, S.B., Steinetz, B.M., (2006) Sealing in Turbomachinery, Journal of Propulsion and Power, vol. 22, no. 2, March-April 2006 (NASA/TM–2006-214341). |
| 2006 |
Daggett, D., Hadaller, O., Hendricks, R., Walther, R., (2006) Alternative Fuels and Their Potential Impact on Aviation- ICAS 2006-5.8.2 25th International Congress of the Aeronautical Sciences, Hamburg, Germany, 3-8 Sept. 2006. |
| 2006 |
Moraru, L., Dimofte, F., Hendricks, R.C. (2006) Free Body Dynamics of a Spinning Cylinder with Planar Restraint –(A.K.A. Barrel of Fun) – Part II, Paper 138-ISROMAC-11, Proceedings of ISROMAC-11: The Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, Feb 26-Mar 2 2006. |
| 2006 |
Hendricks, R.C., Daggett, D., Anast, P., (2005) Global Energy and Aviation Concerns, Seals and Secondary Air Flows Workshop, Ohio Aerospace Institute, 8-9 Nov. 2005 (CP-2006-214383-VOL1). |
| 2007 |
Hendricks, R.C., Daggett, D. L., Shouse, D.T., Roquem, Brankovic, A., Ryder, R.C. Can Water Injected Turbomachines Provide Cost Effective Emissions and Maintenance Reductions, Journal Propulsion and Power. |
| 2007 |
Dagget, D.L., Hendricks, R.C., Mahashabde, A., Waitz, I., Water Injection – Could It Reduce Airplane Maintenance Costs and Airport Emissions? 17th International Symposium on Airbreathing Engines, (ISABE) Munich, Germany |
| 2007 |
Hendricks, R.C., Bushnell, D. M., Halophytes Energy Feedstocks: Back to Our Roots, 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-12) Honolulu, HI |
| 2007 |
Hendricks, R.C., Dagget, D. L., Anast, P., Lowery, N., Future Fuel Scenarios and Their Potential Impact to Aviation, Journal Propulsion and Power |
| 2007 |
Hendricks, R.C., Daggett, D. L., Walther, R., Corporan, E., Alternative Fuels for Use in Commercial Aircraft, 18th ISABE Conference, Bejing, China. |
| 2007 |
Hendricks, R.C., Methane Hydrates: More Than a Viable Aviation Fuel Feedstock Option? 5th International Energy Conversion Engineering Conference and Exhibit (IECEC), St.. Louis, MO (AIAA) |
| 2007 |
Steinetz, B. M., Hendricks, R. C., 2006 NASA Seal Secondary Workshop, Vol. 1, 2006 NASA Seals/Secondary Air System Workshop, Cleveland, OH , CP 16198 |
| 2007 |
Steinetz, B. M., Hendricks, R. C., Delgado, I., 2006 NASA Seal Secondary Workshop, Vol. !!, 2006 NASA Seals/Secondary Air System Workshop, Cleveland, OH (ITAR) CP 16198 |
| 2007 |
Vlcek, B. L., Hendricks, R. C., Zaretsky, E. V., Probabilistic Analysis for Comparing Fatigue Data Based on Johnson-Weibull Parameters, Int. Design Engineering Technical Conferences and Computers and Info Engineering Conference, Las Vegas, NV (ASME) |
| 2007 |
Vlcek, B.L., Hendricks, R.C., Zaretsky, E.V. Probabilistic Analysis for Comparing Fatigue Data Based on Johnson-Weibull Parameters, Mechanical Design |
| 2007 |
Brankovic, A., Ryder, R. C., Hendricks, R. C., Huber, M. L., A Step Toward Neutral Aviation, SAE International, 2007 Aerotech Conference and Exhibition, Los Angeles, CA |
| 2007 |
Chupp, R.E., Hendricks, R. C , Lattime, S.B., Steinet, A., Turbomachinery Clearance Controls, Turbine Science and Technology, AIAA Progress in Astronautics and Aeronautics Series. |
| 2007 |
Hendricks, R. C., Dimofte, Fl. L., Chupp, R. E., Steinetz, B.M., Interfaces Weakest Links: Yet Greatest Opportunities, Journal Propulsion and Power |
| 2007 |
Hendricks, R. C., Potential Carbon Negative Commercial Aviation through Land Management, 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-12) Honolulu, HI |
| 2007 |
Hendricks, R.C., Braun, M. J., Deng, D., Hendricks, J.A., Compliant Turbomachine Sealing, Journal Propulsion and Power |
| 2008 |
Hendricks, R. C., Flow Instabilities in Featherseals Due to Upstream Harmonic Pressure Fluctuations, 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-12) Honolulu, HI |
| 2008 |
Hendricks, R. C.., Alternate Fueled Flight: Halophytes, Algae, Bio, and Synthetic Fuels, Workshop on Alternate Fueling Sustainable Supply, Twinsburg, OH (Atlantic Green Fuels Project) |
| 2008 |
Steinetz, B. M,, Hendricks, R. C. 2007 NASA Seal Secondary Workshop, Vol. !!, 2007 NASA Seals/Secondary Air System Workshop, Cleveland, OH (ITAR) CP 16554 |
| 2008 |
Steinetz, B. M,, Hendricks, R. C. 2007 NASA Seal Secondary Workshop, Vol. 1, 2007 NASA Seals/Secondary Air System Workshop, Cleveland, OH CP 16554 |
| 2008 |
Vlcek, B. L., Hendricks, R. C., Zaretsky, E. V., Test Population Selection from Weibull Based Monte Carlo Simulations of Fatigue Life 10th Non-Deterministic Approaches Conference, (AIAA), Schaumburg, IL |
| 2008 |
Zaretsky, E. V., Litt, J. S., Hendricks, R. C., Soditus, S. M., Determination of Turbine Blade Life from Turbine Engine Field Data, 10th Non-Deterministic Approaches Conference, (AIAA), Schaumburg, IL |
