Research and Technology | NASA Glenn Research Center

Dr. Christos C. Chamis

Current as of 2006

1. Liu, C.Y. and Chamis, C.C: Residual Stresses in Filament Wound Laminates and Optimum Programmed Winding Tension, presented at the 20th Anniversary Technical Conference of the Reinforced Plastic Division of The Society of the Plastics Industry, Inc., 1965, pp. 1-10.

2. Chamis, C.C. and Sendeckj, G.P: Critique on Theories Predicting Thermoelastic Properties of Fibrous Composites. J. Composite Materials, Vol. 2, No.3, l968, pp. 332-358.

3. Chamis, C.C: Thermoelastic Properties of Unidirectional Filamentary Composites by a Semiempirical Micromechanics Theory. Science of Advanced Materials and Process Engineering. Vol. 14, l968, pp. I-4-5.

4. Chamis, C.C: Important Factors in Fiber Composite Design, Part 1. Modern Plastics, l969, pp. 1-9.

5. Chamis, C.C: Important Factors in Fiber Composite Design. 24th Annual Technical Conference, 1969 Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., Section 18-E, pp. 1-13.

6. Chamis, C.C: Closing Materials Research Structural Design Cycle, Journal of Engineering Mechanics, Division, ASCE, Vol. 95, No. EM5, l969, pp. 1255-1268.

7. Chamis, C.C: Buckling of Anisotropic Composite Plates. Journal of the Structural Division, ASCE, Vol. 95, No.ST10, l969, pp. 2119-2139.

8. Chamis, C.C: Analysis, Design, and Research Trends in Structural Fibrous Composites. First Structural Plastics Symposium, Structural Plastics: Properties and Possibilities. l969, pp. 193-244.

9. Chamis, C.C: Failure Criteria for Filamentary Composites. Special Technical Publication, ASTM, STP 460, 1970, pp. 336-351.

10. Chamis, C.C: Lamination Residual Stresses in Cross-Plied Fiber Composites. 26th Annual Technical Conference, 1971 Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., Section 17-D, pp. 1-12.

11. Chamis, C.C., Hanson, M.P. and Serafini, T.T: Impact Resistance of Unidirectional Fiber Composites. Special Technical Publication, ASTM, STP 497, l972, pp. 324-349.

12. Chamis, C.C: Computerized Multilevel Analysis for Multilayered Fiber Composites. Computers & Structures, Vol. 3, l972, pp. 467-482.

13. Chamis, C.C: Design Properties of Randomly Reinforced Fiber/Resin Composites. 27th Annual Technical Conference, 1972 Reinforced Plastics/Composates Institute, The Society of the Plastics Industry, Inc., Section 9-D, pp. 1-10.

14. Sullivan, T.L. and Chamis, C.C: Some Important Aspects in Testing High-Modulus Fiber Composite Tubes in Axial Tension. Special Technical Publication, ASTM, STP 521, l973, pp. 277-292.

15. Chamis, C.C., Hanson, M.P. and Serafini, T.T: Criteria for Selecting Resin Matrices for Improved Composite Strength. Modern Plastics, l973, pp. 1-9.

16. Chamis, C.C., Hanson, M.P. and Serafini, T.T: Criteria for Selecting Resin Matrices for Improved Composite Strength. 28th Annual Technical Conference, 1973 Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., Section 12-C, pp. 1-12.

17. Chamis, C.C: Analysis of the Three-Point-Bend Test for Materials with Unequal Tension and Compression Properties. 29th Annual Technical Conference, Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., l974, Section 16-D, pp. 1-11.

18. Hanson, M.P. and Chamis, C.C: Experimental and Theoretical Investigation of HT-S/PMR-PI Composites for Application to Advanced Aircraft Engines. 29th Annual Technical Conference, 1974 Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., Section 16-C, pp. 1-10.

19. Chamis, C.C. and Sullivan, T.T: A Computational Procedure to Analyze Metal Matrix Laminates with Nonlinear Lamination Residual Strains. Special Technical Publication, ASTM, STP 580, l975, pp. 327-339.

20. Chamis, C.C. and Sullivan, T.T: Nonlinear Response of Boran/Aluminum Angleplied Laminates Under Cyclic Tensile Loading: Contributing Mechanisms and Their Effects. Special Technical Publication, ASTM, STP569, l975, pp.95-114.

21. Liber, T., Daniel, I.M. and Chamis, C.C: The Effects of Thermal Cycling on Advanced Composites Angle Ply Laminates. 30th Anniversary Technical Conference, Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., l975, Section 18-B, pp. 1-6.

22. Chamis, C.C. and Minich, M.D: Structural Response of Fiber Composite Fan Blades. The American Society of Mechanical Engineers, 75-GT-78, l975, pp. 1-20.

23. Minich, M.D. and Chamis, C.C: Cantilevered Unsymmetric Fiber Composite Laminated Plates. AIAA Journal, Vol. 14, No. 3, l976, pp. 299-300.

24. Liber, T.M., Daniel, I.M. and Chamis, C.C: Static Behavior and the Effects of Thermal Cycling in Hybrid Laminates. 32nd Annual Technical Conference, Reinforced Plastics/Composites Institute, The Society of the Plastic Industry, Inc., l977, Section 15-D, pp. 1-11.

25. Minich, M.D. and Chamis, C.C: Doubly-Curved Variable-Thickness Isoparametric Heterogeneous Finite Element. Computers & Structures, 1977 (in ‘76 publication), Vol. 7, pp. 295-301.

26. Chamis, C.C. and Sinclair, J.H: Ten-Deg Off-Axis Test for Shear Properties in Fiber Composites. Experimental Mechanics, 1977, Vol. 17, No.9, pp. 1-8.

27. Chamis, C.C: Vibration Characteristics of Composite Fan Blades and Comparison with Measured Data. Journal of Aircraft, l977, Vol. 14, No. 7, pp. 644-647.

28. Chamis, C.C., Lark, R.F. and Sinclair, J.H: Integrated Theory for Predicting the Hygrothermomechanical Response of Advanced Composite Structural Components. ASTM, STP 658, l978, pp. 160-192.

29. Liber, T., Daniel, I.M. and Chamis, C.C: Static Behavior and the Effects of Thermal Cycling in Hybrid Laminates. Polymer Engineering and Science, l978, Vol. 18, No. 2, pp. 157-166.

30. Chamis, C.C. and Sinclair, J.H: The Effects of Eccentricities on the Fracture of Off-Axis Fiber Composites. Polymer Engineering and Science, l979, Vol. 19, No. 5, pp. 338-341.

31. Chamis, C.C. and Smith, G.T: Codstran: Composite Durability Structural Analysis. Fibrous Composites in Structural Design, l980, pp. 771-780.

32. Chamis, C.C. and Sinclair, J.H: Mechanics of Intraply Hybrid Composites – Properties, Analysis and Design. Polymer Composites, l980, Vol. 1, No. 1, pp. 1-13.

33. Chamis, C.C. and Sinclair, J.H: Analysis of High Velocity Impact on Hybrid Composite Fan Blades. Journal of Aircraft, l980, Vol. 17, No. 10, pp. 763-766.

34. Chamis, C.C. and Smith, G.T: Engine Environmental Effects on Composite Behavior. AIAA/ASME/ASCE/AHS, 21st Structures, Structural Dynamics, and Materials Conference, Part 2, 1980, pp. 987-997.

35. Chamis, C.C., Lark, R.F. and Sinclair, J.H: Mechanical Property Characterization of Intraply Hybrid Composites. ASTM, STP 734, 1981, pp. 261-280.

36. Sinclair, J.H. and Chamis, C.C: Fracture Modes in Off-Axis Fiber Composites. Polymer Composites, l981, Vol. 2, No. 1, pp. 45-52.

37. Chamis, C.C., Lark, R.F. and Sinclair, J.H: Superhybrid Composite Blade Impact Studies. ASME, l981, No. 81-GT-24, pp. 1-8.

38. Chamis, C.C: Integrated Analysis of Engine Structures. Computer Analysis of Large – Scale Structures, AMD, l981, Vol. 49, pp. 17-33.

39. Chamis, C.C. and Smith, G.T: Engine Environmental Effects on Composite Behavior. AIAA, 80-0695R, Journal of Aircraft l981, Vol. 18, No. 12, pp. 10l9-1024.

40. Chamis, C.C. and Sinclair, J.H: Nonlinear Laminate Analysis for Metal Matrix Fiber Composites. AIAA/ASME/ASCE/AHS 22nd Structures, Structural Dynamics and Materials Conference, Part 1, AIAA, 1981, pp. 313-324.

41. Aiello, R.A., Hirschbein, M.S. and Chamis, C.C: Structural Dynamics of Shroudless, Hollow, Fan Blades with Composite In-Lays. ASME, l982, No. 82-GT-284, pp. 1-7.

42. Chamis, C.C., Lark, R.F. and Sinclair, J.H: Superhybrid Composite Blade Impact Studies. Journal of Engineering for Power, l981, Vol. 103, pp. 731-738.

43. Liu, C.Y. and Chamis, C.C: Residual Stresses in Filament Wound Laminates and Optimum Programmed Winding Tension. 20th Annual Meeting of the Reinforced Plastics Division, The Society of the Plastics Industry, Inc., (no date) Section 5-D, pp. 1-10.

44. Chamis, C.C. and Sinclair, J.H: Prediction of Composite Hygral Behavior Made Simple. Sampe Quarterly, l982, Vol. 14, No. 1, pp. 1-11.

45. Chamis, C.C. and Smith, G.T: Environmental and High Strain Rate Effects on Composites for Engine Applications. AIAA/ASME/ASCE/AHS 23rd Structures, Structural Dynamics and Materials Conference, Part 1, AIAA, 1982, pp.405-419.

46. Chamis, C.C. and Sinclair, J.H: Prediction of Composites Hygral Behavior Made Simple. 37th Annual Conference, Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., l982, Session 24-E, pp. 1-9.

47. Chamis, C.C: Sensitivity Analysis Results of the Effects of Various Parameters on Composite Design. Sampe Quarterly, l983, Vol. 14, No. 2, 6 pages.

48. Chamis, C.C. and Sinclair, J.H: Compressive Behavior of Unidirectional Fibrous Composites. ASTM, STP 808, 1983, pp. 155-174.

49. Chamis, C.C. and Sinclair, J.H: Durability/Life of Fiber Composites in Hygrothermomechanical Environments. ASTM, STP 787, 1983, pp. 498-512.

50. Chamis, C.C. and Aiello, R.A: Tensile Buckling of Advanced Turboprops. Journal of Aircraft, l983, Vol. 20, No. 11, pp. 907-912.

51. Brown, K.W., Pratt, T.K and Chamis, C.C: Structural Tailoring of Engine Blades. AIAA/ASME/ASCE/AHS, 24th Structures, Structural Dynamics and Materials Conference. l983, pp. 1-9.

52. Chamis, C.C: Design Procedures for Fiber Composite Structural Components: Hanger Rods. Modern Plastics, l983, Vol. 60, No.9, p. l06, l08, 111.

53. Chamis, C.C: Meeting Requirements for Tubular Columns. Modern Plastics, l983, Vol. 60, No. 10, p. 88, 90.

54. Chamis, C.C: Hygrothermal Effects on Material Properties. Modern Plastics, l983, Vol. 60, No. 11, p. 78, 80.

55. Chamis, C.C: Design Concepts and Parameters Assessment and Sensitivity Analysis of Select Composite Structural Components. International Journal of Vehicle Design, l983, pp. 1-31.

56. Lark, R.F. and Chamis, C.C: Hygrothermomechanical Evaluation of Transverse Filament Tape Epoxy/Polyester Fiberglass Composites. 38th Annual Conference, Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., l983, Session 12-C, pp. 1-15.

57. Chamis, C.C: Design Procedures for Fiber Composite Structural Components: Rods, Beams, and Beam Columns. 38th Annual Conference, Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., l983, Session 16-C, pp. 1-9.

58. Chamis, C.C: Simplified Composite Micromechanics Equations for Strength, Fracture Toughness and Environmental Effects. 39th Annual Conference, Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., l984, Session 11-D, pp. 1-16.

59. Chamis, C.C. and Smith, G.T: Environmental and High Strain Rate Effects on Composites for Engine Applications. AIAA Journal, l984, Vol. 22, No. 1, pp. 128-134.

60. Chamis, C.C: Simplified Composite Micromechanical Equations for Hygral, Thermal, and Mechanical Properties. Sampe Quarterly, l984, pp. 14-23.

61. Chamis, C.C: Interply Layer Degradation Effects on Composite Structural Response. AIAA/ASM/ASCE/AHS 25th Structures, Structural Dynamics, and Materials Conference, l984, pp. 1-14.

62. Chamis, C.C: Designing with Fiber-Reinforced Plastics (Planar Random Composites). The Journal of the Astronautical Sciences, 1984, Vol. 32, No. 3, pp. 301-327.

63. Chamis, C.C: Simplified Composite Micromechanics Equations for Strength, Fracture Toughness and Environmental Effects. Sampe Quarterly, l984, pp. 44-55.

64. Lark, R.F. and Chamis, C.C: Hygrothermomechanical Evaluation of Transverse Filament Tape Epoxy/Polyester Fiberglass Composites. Polym.-Plast. Technol Eng., 22(2), l984, pp. 129-154.

65. Chamis, C.C. and Sinclair, J.H: Longitudinal Compressive Failure Modes in Fiber Composites: End Attachment Effects on IITRI Type Test Specimens. Journal of Composites Technology and Research, l985, Vol. 7, No. 4, pp. 129-135.

66. Murthy, P.L.N. and Chamis, C.C: A Study of Interply Layer effects on the Free Edge Stress Field of Angleplied Laminates. Computers & Structures, l985, Vol. 20, No.1-3, pp. 431-441.

67. Chamis, C.C. and Sinclair, J.H: Impact Resistance of Fiber Composites: Energy-Absorbing Mechanisms and Environmental Effects. ASTM, STP 864, 1985, pp. 326-345.

68. Chamis, C.C. and Smith, G.T: Resin Selection Criteria for “Tough” Composite Structures. AIAA Journal, l985, Vol. 23, No. 6, pp. 902-911.

69. Chamis, C.C: NASA Lewis Research Center/University Graduate Research Program on Engine Structures. The American Society of Mechanical Engineers, 85-GT-159, l985, pp. 1-10.

70. Chamis, C.C. and Williams, G.C: Interply Layer Degradation Effects on Composite Structural Response. Journal of Aircraft, l985, Vol. 22, No. 7, pp. 573-580.

71. Chamis, C.C: Design Concepts for Low-Cost Composite Engine Frames. Journal of Composites Technology & Research, l985, Vol. 7, No. 2, pp. 41-48.

72. Chamis, C.C: Design Procedures for Fiber Composites Structural Components: Panels Subjected to Combined In-Plane Loads. 40th Annual Conference, Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., l985, Session 15-B, pp. 1-11.

73. Sarigul, N. and Chamis, C.C: Computer Aided Drivation of Equations for Composite Mechanics Problems and Finite Element Analyses. AIAA/ASME/ASCE/AHS 27th Structures, Structural Dynamics and Materials Conference, Part 1, AIAA, 1986, pp. 676-679.

74. Murthy, P.L.N. and Chamis, C.C: Dynamic Stress Analysis of Smooth and Notched Fiber Composite Flexural Specimens. ASTM, STP 893, l986, pp. 368-391.

75. Murthy, P.L.N. and Chamis, C.C: ICAN: Integrated Composites Analyzer. Journal of Composites Technology & Research, 1986, Vol. 8, No. 1, pp. 8-17.

76. Chamis, C.C. and Johns, R.H: Computational Engine Structural Analysis. The American Society of Mechanical Engineers, 86-GT-70, l986, pp. 1-12.

77. Chamis, C.C: Predicting Microstresses in RP Composites. (Best of Conference) l986 SPI RP/C Conference Paper, Modern Plastics, pp. 156-164.

78. Lark, R.F. and Chamis, C.C: Fabrication and Quality Assurance Processes for Superhybrid Composite Fan Blades. Journal of Composites Technology & Research, l986, Vol. 8, No. 3, pp. 98-102.

79. Caruso, J.J. and Chamis, C.C: Assessment of Simplified Composite Micromechanics Using Three-Dimensional Finite-Element Analysis. Journal of Composites Technology & Research, l986, Vol. 8, No. 3, pp. 77-83.

80. Chamis, C.C: Probabilistic Structural Analysis Methods for Critical SSME Propulsion Components. AIAA Space Systems Technology Conference, San Diego, l986, p. 132.

81. Chamis, C.C: Computational Composite Mechanics for Aerospace Propulsion Structures. AIAA Space Systems Technology Conference, San Diego, l986, pp. 145-155.

82. Chamis, C.C., Aiello, R.A. and Murthy, P.L.N: Composite Sandwich Thermostructural Behavior: Computational Simulation. AIAA/ASME/ASCE/AHS 27th Structures, Structural Dynamics and Materials Conference, Part 1, AIAA, 1986, pp. 370-381.

83. Chamis, C.C: Simplified Composite Micromechanics for Predicting Microstresses. Journal of Reinforced Plastics and Composites, l987, Vol. 6, pp. 269-289.

84. Nagpal, V.K, Rubinstein, R. and Chamis, C.C: Probabilistic Structural Analysis to Quantify Uncertainties Associated with Turbopump Blades. AIAA/ASME/ASCE/AHS 28th Structures, Structural Dynamics and Materials Conference, Part 1, AIAA, 1987, pp. 268-274.

85. Chamis, C.C: Advances in 3-D Inelastic Analysis Methods for Hot Section Components. AIAA/ASME/ASCE/AHS 28th Structures, Structural Dynamics and Materials Conference, Part 1, AIAA, 1987, pp. 802-811.

86. Brown, K.W., Harvey, P.R. and Chamis, C.C: Structural Tailoring of Advanced Turboprops. AIAA/ASME/ASCE/AHS 28th Structures, Structural Dynamics and Materials Conference, Part 1, AIAA, 1987, pp. 827-837.

87. Ginty, C.A. and Chamis, C.C: Fracture Characteristics of Angleplied Laminates Fabricated from Overaged Graphite/Epoxy Prepreg. ASTM, STP 948, l987, pp. 101-130.

88. Chamis, C.C: Probabilistic Structural Analysis Methods for Space Propulsion System Components. Probabilistic Engineering Mechanics, l987, Vol. 2, No. 2, pp. 100-110.

89. Chamis, C.C. and Murthy, P.L.N: Design Procedures for Fiber Composite Box Beams. 42nd Annual Conference, Composites Institute, The Society of Plastics Industry, l987, Session 26-C, pp. 1-9.

90. Valisetty, R.R. and Chamis, C.C: Sublaminate or Ply-Level Analysis of Composites and Strain Energy Release Rates of End-Notch and Mixed-Mode Fracture Specimens. ASTM, STP 972, l988, pp. 41-56.

91. Maser, J.G., Fertis, D.G., Aiello, R.A. and Chamis, C.C: Parametric Studies of Advanced Turboprops. AIAA-88-2266, 29th Structures, Structural Dynamics, and Materials. l988, pp. 431-440.

92. Chamis, C.C. and Aiello, R.A. and Murthy, P.L.N: Fiber Composite Sandwich Thermostructural Behavior: Computational Simulation. Journal of Composites Technology & Research, l988, Vol. 10, No. 3, pp. 93-99.

93. Shiao, M.C., Nagpal, V.K and Chamis, C.C: Probabilistic Structural Analysis Aerospace Components Using Nessus. AIAA/ASME/ASCE/AHS 29th Structures, Structural Dynamics and Materials Conference, Part 3, AIAA, 1988, pp. 1275-1282.

94. Stock, T.A., Bellini, P.X., and Murthy, P.L.N, and Chamis, C.C: Probabilistic Composite Micromechanics. AIAA/ASME/ASCE/AHS 29th Structures, Structural Dynamics and Materials Conference, Part 3, AIAA, 1988, pp. 1289-1298.

95. Boyce, L. and Chamis, C.C: Probabilistic Constitutive Relationships for Cyclic Material Strength Models. AIAA/ASME/ASCE/AHS 29th Structures, Structural Dynamics and Materials Conference, Part 3, AIAA, 1988, pp. 1299-1306.

96. Caruso, J.J. and Chamis, C.C: Superelement Methods Applications to Micromechanics of High Temperature Metal Matrix Composites. AIAA/ASME/ASCE/AHS 29th Structures, Structural Dynamics and Materials Conference, 1988, pp. 1388-1400.

97. Chamis, C.C: Simplified Procedures for Designing Composite Bolted Joints. 43rd Annual Conference, Composites Institute, The Society of the Plastics Industry, Inc., l988, Session 23-D, pp. 1-5.

98. Thandar, P.B., and Chamis, C.C: Structural Tailoring of Laminate Properties. AIAA/ASME/ASCE/AHS 30th Structures, Structural Dynamics and Materials Conference, Part 4, AIAA, 1989, pp. 1828-1831.

99. Boyce, L. and Chamis, C.C: Probabilistic Constitutive Relationships for Material Strength Degradation Models. AIAA/ASME/ASCE/AHS 30th Structures, Structural Dynamics and Materials Conference, Part 4, AIAA, 1989, pp. 1832-1839.

100. Chamis, C.C. and Murthy, P.L.N: Design Procedure for Fiber Composite Box Beams. Journal of Reinforced Plastics and Composites, l989, Vol. 8, pp. 370-397.

101. Saravanos, D.A., and Chamis, C.C: Mechanics of Damping for Fiber Composite Laminates Including Hygro-Thermal Effects. AIAA/ASME/ASCE/AHS 30th Structures, Structural Dynamics and Materials Conference, Part 1, AIAA, 1989, pp. 296-303.

102. Wilt, T.E., Murthy, P.L.N. and Chamis, C.C: Fracture Toughness Computational Simulation of General Delaminations in Fiber Composites. Journal of Reinforced Plastics and Composites, l989, Vol. 8, pp. 2-17.

103. Chamis, C.C: Computational Structural Mechanics for Engine Structures. AIAA/ASME/ASCE/AHS 30th Structures, Structural Dynamics and Materials Conference, Part 2, AIAA, 1989, pp. 868-873.

104. L. Minnetyan, Murthy, P.L.N. and Chamis, C.C: Structural Behavior of Composites with Progressive Fracture. AIAA/ASME/ASCE/AHS 30th Structures, Structural Dynamics and Materials Conference, Part 2, AIAA, 1989, pp. 968-978.

105. Caruso, J.J., Trowbridge, D. and Chamis, C.C: Finite Element Applications to Explore the Effects of Partial Bonding on Metal Matrix Composite Properties. AIAA/ASME/ASCE/AHS 30th Structures, Structural Dynamics and Materials Conference, Part 1, AIAA, 1989, pp. 140-154.

106. Grady, J.E., Chamis, C.C. and Aiello, R.A: Dynamic Delamination Buckling in Composite Laminates Under Impact Loading: Computational Simulation. ASTM, STP 1012, l989, pp. 137-149.

107. Saravano, D.A. and Chamis, C.C: Computational Simulation of Damping in Composite Structures. Hellenic Society for Theoretical & Applied Mechanics, 2nd Nat. Congress on Mechanics, Athens, 1989, Vol. 11, pp. 635-647.

108. Saravanos, D.A. and Chamis, C.C: Tailoring of Composite Links for Optimal Damped Elasto-Dynamic Performance. ASME, DE-Vol. 19-3, l989, Advances in Design Automation.

109. Chamis, C.C: Composite Mechanics for Engine Structures. Journal of Propulsion and Power, l989, Vol. 5, No. 2, pp. 228-241.

110. Chamis, C.C: Mechanics of Composite Materials: Past, Present, and Future. Journal of Composites Technology & Research, l989, Vol. 11, No. 2, pp. 3-14.

111. Chamis, C.C. and Hopkins, D.A: Probabilistic Structural Analysis Methods of Hot Engine Structures. The American Society of Mechanical Engineers, 89-GT-122, l989, pp. 1-13.

112. Rubinstein, R. and Chamis, C.C: Structural Tailoring of Space Shuttle Main Engine Turbopump Blades SSME/STAEBL. Journal of Propulsion and Power, l989, Vol. 5, No. 4, pp. 421-425.

113. Cruse, T.A., Chamis, C.C. and Millwater, H.R: An Overview of the NASA (LeRC)-SwRI Probabilistic Structural Analysis (PSAM) Program. 5th International Conference, Structural Safety and Reliability, l989, pp. 2267-2274.

114. Nagpal, V.K., Rubinstein, R. and Chamis, C.C: Probabilistic Structural Analysis to Quantify Uncertainties Associated with Turbopump Blades. AIAA Journal, l989, Vol. 27, No. 6, pp. 809-813.

115. Chamis, C.C. and Shiao, M.C: Structural Reliability, Risk and Certification: Computational Simulation. ASME Winter Annual Meeting, l989, pp. 1-16.

116. Chamis, C.C. and T. A. Cruse: Probability Approach for Strength Calculations. 70th Meeting of the Structures and Material Panel of AGARD, 1990, pp. 15-1 – 15-13.

117. Shiao, M. C. and Chamis, C.C: A Methodology for Evaluating the Reliability and Risk of Structures Under Complex Service Environments. A IAA/ASME/ASCE/AHS 31st Structures, Structural Dynamics and Materials Conference, Part 2, AIAA, 1990, pp. 1070-1080.

118. Shah, A., Nagpal, V.K and Chamis, C.C: Probabilistic Analysis of Bladed Turbine Disks and the Effects of Mistuning. AIAA/ASME/ASCE/AHS 31st Structures, Structural Dynamics and Materials Conference, Part 2, AIAA, 1990, pp. 1033-1038.

119. Chamis, C.C. and Stock, T.A: Probabilistic Simulation of Uncertainties in Composite Uniaxial Strengths. 45th Annual Conference, Composites Institute, The Society of the Plastic Industry, 1990, Session 20-F, pp. 1-7.

120. Chamis, C.C., Murthy, P.L.N. and Hopkins, D.A: Computational Simulation of High-Temperature Metal Matrix Composites Cyclic Behavior. ASTM, STP 1080, l990, pp. 56-69.

121. Saravanos, D.A. and Chamis, C.C: Unified Micromechanics of Damping for Unidirectional and Off-Axis Fiber Composites. Journal of Composites Technology & Research, l990, Vol. 12, No. 1, pp. 31-40.

122. Saravanos, D.A. and Chamis, C.C: Multi-Objective Shape and Material Optimization of Composite Structures Including Damping. 31st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, l990, pp. 1-20.

123. Maser, J.G., Fertis, D.G., Aiello, R.A. and Chamis, C.C: Parametric Studies of Advanced Turboprops. Journal of Propulsion and Power, l990, Vol. 6, No. 1, pp. 58-62.

124. Thanedar P.B., and Chamis, C.C: Composite Laminate Tailoring with Probabilistic Constraints and Loads. The American Society of Mechanical Engineers, PD-Vol. 32, Composite Materials Technology, l990, pp. 11-21.

125. Mital, S.K., Caruso, J.J. and Chamis, C.C: Metal Matrix Composites Microfracture: Computational Simulation. Computers & Structures, l990, Vol. 37, No. 2, pp. 141- 150.

126. Chamis, C.C: Simplified Procedures for Designing Composite Bolted Joints. Journal of Reinforced Plastics and Composites, l990, Vol. 9, pp. 614-626.

127. Hamed, A and Chamis, C.C: Probabilistic Modeling for Simulation of Aerodynamic Uncertainties in Propulsion Systems. Computing Systems in Engineering, l990, Vol. 1, Nos. 2-4, pp. 373-390.

128. Chamis, C.C: Simplified Procedures for Designing Composite Bolted Joints. Journal of Reinforced Plastics and Composites, l990, Vol. 9, pp. 615-626.

129. Saravanos, D.A. and Chamis, C.C: Mechanics of Damping for Fiber Composite Laminates Including Hygrothermal Effects. AIAA Journal, l990, Vol. 28, No. 10, pp. 1813-18l9.

130. Chamis, C.C: Structural Tailoring of Select Fiber Composite Structures. 45th Annual Conference, Composite Institute, l990, Session 15-E, pp. 1-7.

131. Saravanos, D. A. and Chamis, C.C: An Integrated Methodology for Optimizing the Passive Damping of Composite Structures. Polymer Composites, 1990, Vol. 11, No. 6, pp. 328-336.

132. Singhal, S.N., Lackney, J.J., and Chamis, C.C: HITCAN: High Temperature Composite Analyzer. Third Air Force/NASA Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, a Collection of Technical Papers, September 1990, pp. 476-481.

133. Chamis, C.C., McKnight, R., and Hartle, M: Structural Tailoring of AGTE Components with CSTEM. . Third Air Force/NASA Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, a Collection of Technical Papers, September 1990, (presentation only).

134. Chamis, C.C., P.L.N. Murthy, Singhal, S.N. and Lackney, J.J. Hitcan for Actively Cooled Hot-Composite Thermostructural Analysis. The American Society of Mechanical Engineers, 91-GT-116, 1991, pp. 1-8.

135. Saravanos, D.A. and Chamis, C.C: Computational Simulation of Damping in Composite Structures. Journal of Reinforced Plastics and Composites, 1991, Vol. 10, pp. 256-278.

136. Chamis, C.C: Microstresses in Intraply Hybrid Composites. 46th Annual Conference, Composites Institute. 1991, Session 6-E, pp. 1-7.

134. Rencis, J.J., Hopkins, D.A., and Chamis, C.C: Accuracy Estimates for the Boundary Element Method. Finite Elements in Analysis and Design 9, Elsevier Science Publishers, 1991, pp. 229-245.

135. Mital, S.K., and Chamis, C.C: Fiber Pushout Test: A Three -Dimensional Finite Element Computational Simulation. American Society of Testing & Materials, 1991, pp. 14-21.

136. Saravanos, D.A. and Chamis, C.C: Integrated Optimization of Composite Structures for Advanced Damped Dynamic Characteristics. Wright Laboratory, Flight Dynamics Directorate, 1991, Vol. 1.

137. Murthy, P.L.N. and Chamis, C.C: Simplified Procedure for Designing Adhesively Bonded Composite Joints. Journal of Reinforced Plastics and Composites, l991, Vol. 10, pp. 29-41.

138. Boyce, L, Chamis, C.C: Quantification of Uncertainties in Coupled Material Degradation Processes: High Temperature, Fatigue and Creep. AIAA/ASME/ASCE/AHS 32nd Structures, Structural Dynamics, and Materials Conference, l991, Part 1, pp. 66-72.

139. Minnetyan, L., Murthy, P.L.N., and Chamis C.C: Progressive Fracture in Composites Subjected to Hygrothermal Environment.. AIAA/ASME/ASCE/AHS 32nd Structures, Structural Dynamics, and Materials Conference, l991, Part 1, pp. 66-72.

140. Sues, R.H., Chen, H-C., Twisdale, L.A., Chamis, C.C. and Murthy, P.L.N: Programming Probabilistic Structural Analysis for Parallel Processing Computer. AIAA/ASME/ASCE/AHS 32nd Structures, Structural Dynamics, and Materials Conference, l991, Part 2, pp. 1243-1253.

141. Saravanos, D.A. Morel, M.R. and Chamis, C.C: Concurrent Material-Fabrication Optimization of Metal-Matrix Laminates Under Thermo-Mechanical Loading. AIAA/ASME/ASCE/AHS 32nd Structures, Structural Dynamics, and Materials Conference, l991, Part 1, pp. 116-123.

142. Singhal, S.N., Murthy, P.L.N., Chamis, C.C. and Nagpal, V.K: Computational Simulation of Acoustic Fatigue For Hot Composite Structures. AIAA/ASME/ASCE/AHS 32nd Structures, Structural Dynamics, and Materials Conference, l991, Part 4, pp. 2709-2719.

143. Chamis.C.C: Microfracture in High Temperature Metal Matrix Angleply Laminates. AIAA/ASME/ASCE/AHS 32nd Structures, Structural Dynamics, and Materials Conference, l991 (presentation only).

144. Pai, S and Chamis. C.C: An Application of Probabilistic Structural Analysis Methods for Progressive Buckling of a Truss Typical for Space Station Structures. AIAA/ASME/ASCE/AHS 32nd Structures, Structural Dynamics, and Materials Conference, l991 (presentation only).

145. Nicols, L.D. and Chamis, C.C: Numerical Propulsion System Simulation: An Interdisciplinary Approach. AIAA/NASA/OAI Conference on Advanced SEI Technologies, 1991.

146. Brown, H.C. and Chamis, C.C: Computational Characterization of High Temperature Composites Via METCAN. ASME/AMD Vol. 118, 1991, pp. 133-143.

147. Mital, S. K., and Chamis, C.C: Thermally-Driven Microfracture in High Temperature Metal Matrix Composites. ASME/AMD Vol. 118, 1991, pp. 133-143.

148. Morel, M., Saravanos, D.A. and Chamis, C.C: Interphase Layer Optimization for Metal Matrix Composites with Fabrication Considerations. 36th International SAMPE Symposium, 1991, pp. 1988-2000.

149. Mital, S. K. and Chamis, C.C: Computational Simulation of Microfracture in High Temperature Metal Matrix Composites. 36th International SAMPE Symposium, 1991, pp. 2001-2015.

150. Lee, H.-J, Murthy, P.L.N. and Chamis, C.C: Metcan Updates for High Temperature Composite Behavior: Simulation/Verification. 36th International SAMPE Symposium, 1991, 8p. 2016-2028.

151. Murthy, P.L.N. and Chamis, C.C: Micromechanics for Ceramic Matrix Composites. 36th International SAMPE Symposium, 1991, pp. 2249-2263.

152. Shah, A.R., and Chamis, C.C: Simulation of Probabilistic Wind Loads and Building Analysis. DE-Vol. 30, Reliability, Stress Analysis, and Failure Preventation, ASME 1991.

153. G.T. Mase, P.L.N. Murthy and Chamis, C.C: Quantification of Scatter in Composite Properties Via Probabilistic Mechanics. Composite Material Technology, PD-Vol. 45, ASME 1992, pp. 71-76.

154. Chamis, C.C., Murthy, P.L.N. and Minnetyan, L: Progressive Fracture of Polymer Matrix Composite Structures: A New Approach. Composite Material Technology, PD-Vol. 45, ASME 1992, pp. 113-121.

155. Boyce, L., Chamis, C.C: Probabilistic Constitutive Relationships for Cyclic Material Strength Models. J. Propulsion, Vol. 8., No. 1, 1992, pp. 227-232.

156. Minnetyan, L., Murthy, P.L.N. and Chamis C.C: Progressive Fracture in Composites Subjected to Hygrothermal Environment, International Journal of Damage Mechanics, Vol. l, 1992, pp. 60-79.

157. Saravanos, D.A. and Chamis, C.C: Multiobjective Shape and Material Optimization of Composite Structures Including Damping, AIAA Journal, Vol. 30, No. 3, 1992, pp. 805-813.

158. Chamis, C.C. and Singhal, S. N: Coupled Multi-Disciplinary Simulation of Composite Engine Structures in Propulsion Environment. ASME, 92-GT-6, 1992, pp. 1-11.

159. Chamis, C.C. and Murthy, P.L.N: Structural Behavior of Composites with Progressive Fracture, Journal of Reinforced Plastics and Composites, Vol. II, 1992, pp. 413-442.

160. Chamis, C.C. and Shiao, M: Probabilistic Assessment of Thermal Structures. AIAA, Vol. 140, pp. 401-415, 1992.

161. Gotsis, P.K. and Chamis, C.C: Combined Bending and Thermal Fatigue of High-Temperature Metal-Matrix Composites: Computational Simulation. International Journal of Damage Mechanics, Vol. I, 1992, pp. 290-319.

162. Chamis, C.C: Engine Probabilistic Structural Analysis Methods Reliability/Certification. Nonlinear Stochastic Mechanics IUTAM Symposium, Turin, 1992, pp. 115-129.

163. Saravanos, D. A. and Chamis C. C: Integrated Mechanics for the Passive Damping of Polymer-Matrix Composites and Composite Structures. ASTM STP 1169, Philadelphia 1992, pp. 471-489.

164. Pai, S. S. and Chamis, C. C: Probabilistic Structural Analysis of Adaptive/Smart/Intelligent Space Structures. Journal of Intelligent Material Systems, Vol. 3, 1992, pp. 600-616.

165. Saravanos, D. A. and Chamis, C. C: Damped Dynamic Characteristics of Specialty Composite Materials and Structures. ASME, NCA-Vol. 14, 1992, pp. 31-38.

166. Chamis, C. C: Reliability/Risk Methods for Engine Structures. NASA Conference Publication 3174, Vol. II, 1992, pp. 501-510.

167. Minnetyan, L., Chamis, C. C., and Murthy, P.L.N: Structural Durability of a Composite Pressure Vessel. Journal of Reinforced Plastics and Composites, Vol. 11, 1992, pp. 1251-1269.

168. Murthy, P.L.N., Chamis, C. C: Simplified Design Procedures for Fiber Composite Structural Components/Joints. Narosa Publishing House, New Delhi, India, 1992, pp. 33-153.

169. Sues, R.H., Chen, H.-C., Chamis, C. C. and Murthy, P. L. N: Programming Probabilistic Structural Analysis for Parallel Processing Computers. AIAA Journal, Vol. 30, No. 12, 1992, pp. 2871-2872.

170. Chamis, C.C., P.L.N. Murthy, Singhal, S.N. and Lackney, J.J. Hitcan for Actively Cooled Hot-Composite Thermostructural Analysis. Journal of Engineering for Gas Turbines and Power, Vol. 114, 1992, pp. 315-320.

171. Singhal, S.N. and Chamis, C. C: Integrated Interdisciplinary Analysis/Tailoring of Hot Composite Structures. OAI Workshop, “Interdisciplinary System Simulation and Design”, 1992, pp. 48-70.

172. Reddy, E.S., Abumeri, G.H., Murthy, P.L.N. and Chamis, C.C: Structural Tailoring of Aircraft Engine Blade Subject to Ice Impact Constraints. AIAA, MDO Conference, Cleveland, 1992, pp. 1-10.

173. Shiao, M.C., and Chamis, C.C: Mapping Methods for Computational Efficient and Accurate Structural Reliability. AIAA/ASME/ASCE/AHS/ASC, 33th Structures, Structural Dynamics and Materials Conference, l992, pp. 433-443.

174. Pai, S.S., and Chamis, C.C: Nonuniform Thermal Environmental Effects on Space Truss Structural Reliability. AIAA/ASME/ASCE/AHS/ASC, 33th Structures, Structural Dynamics and Materials Conference, l992, pp. 471-478.

175. Sutjahjo, E. and Chamis, C.C: Material Nonlinear Analysis via Mixed-Iterative Finite Element Method. AIAA/ASME/ASCE/AHS/ASC, 33th Structures, Structural Dynamics and Materials Conference, l992, pp. 870-877.

176. Singhal, S.N. and Chamis, C.C: Multidisciplinary Tailoring of Hot Composite Structures. AIAA/ASME/ASCE/AHS/ASC, 33rd Structures, Structural Dynamics and Materials Conference, l992, pp. 2837-2847.

177. Mital, S. K., Chamis, C.C: Three-Dimensional Finite Element Simulation of Intermingled-Fiber Hybrid Composite Behavior. 37th International SAMPE Symposium, Vol. 37, March 1992, pp. 88-99.

178. Morel, M.R., Saravanos, D.A. and Chamis, C. C: Tailored Metal Matrix Laminates for High-Temperature Performance. 37th International SAMPE Symposium, Vol. 37, March 1992, pp. 390-402.

179. Sanfeliz, J. G., Murthy P. L. N. and Chamis C. C: Computational Simulation of Surface Waviness in Graphite/Epoxy Woven Composites Due to Initial Curing. 37th International SAMPE Symposium, Vol. 37, March 1992, pp. 1325-1338.

180. Chamis, C.C., and Singhal, S.N: Coupled Multidisciplinary Simulation of Composite Engine Structures in Propulsion Environment. Journal of Engineering for Gas Turbines and Power, Vol. 115, 1993, pp. 300-306.

181. Minnetyan, L., Rivers, J. M., Chamis, C. C. and Murthy, P.L.N: Damage Progression in Stiffened Composite Panels. AIAA/ASME/ASCE/AHS/ASC, 34th Structures, Structural Dynamics and Materials Conference, 1993, pp. 436-444.

182. Mahadevan, S. and Chamis. C.C: Structural System Reliability Under Multiple Failure Modes. AIAA/ASME/ASCE/AHS/ASC, 34th Structures, Structural Dynamics and Materials Conference, l993, pp. 707-713.

183. Liaw, D.G., Singhal, S. N., Murthy, P.L.N. and Chamis C. C: Quantification of Uncertainties in Composites. AIAA/ASME/ASCE/AHS/ASC, 34th Structures, Structural Dynamics and Materials Conference, 1993, pp. 1163-1173.

184. Shiao, M.C., Abumeri, G. H. and Chamis, C. C: Probabilistic Assessment of Composite Structures. AIAA/ASME/ASCE/AHS/ASC, 34th Structures, Structural Dynamics and Materials Conference, l993, pp. 1174-1186.

185. Chamis, C. C., Murthy, P. L. N. and Liaw, L: Probabilistic Simulation of Stress Concentration in Composite Laminates. AIAA/ASME/ASCE/AHS/ASC, 34th Structures, Structural Dynamics and Materials Conference, l993, pp. 1187-1197.

186. Chamis, C. C., Probabilistic Simulation of the Human Factor in Structural Reliability. AIAA/ASME/ASCE/AHS/ASC, 34th Structures, Structural Dynamics and Materials Conference, l993, pp. 1624-1633.

187. Reddy, E.S., Abumeri, G. H. and Chamis C. C: BLASIM: A Computational Tool to Assess Ice Impact Damage on Engine Blades. AIAA/ASME/ASCE/AHS/ASC, 34th Structures, Structural Dynamics and Materials Conference, l993, pp. 2912-2918.

188. Sutjahjo, E. and Chamis, C. C: Finite Element Procedures for Coupled Linear Analysis of Heat Transfer, Fluid and Solid Mechanics. AIAA/ASME/ASCE/ AHS/ASC 34th Structures, Structural Dynamics and Materials Conference, l993, pp. 2919-2933.

189. Shiao, M. C. and Chamis, C. C: Probabilistically Configured Adaptive Composite Structures. AIAA/ASME/ASCE/AHS/ASC, 34th Structures, Structural Dynamics and Materials Conference, l993, pp. 3198-3208.

188. Chamis, C.C., Murthy, P.L.N. and Singhal, S.N: Computational Simulation of Hot Composite Structures. ASME DE-Vol. 55, Reliability, Stress Analysis, and Failure Prevention, 1993, pp. 317-330.

189. Chamis, C.C., Shiao, M.C: Probabilistic Assessment of Composite Structures. ASME PD-Vol. 53, Composite Material Technology, 1993.

190. Mital, S.K., Murthy, P.L.N. and Chamis, C.C: Interfacial Microfracture in High Temperature Metal Matrix Composites. J. Composite Materials, Vol. 27, No. 17, l993, pp. 1678-1694.

191. Chamis, C.C. and Singhal, S.N: Panel Discussion on the State of the Art and Future Direction of High-Temperature Composite Structures. Computer Science and Technology, 1993, pp. 129-136

192. Chamis, C.C. and Singhal, S.N: Multi-Disciplinary Coupling for Integrated Design of Propulsion Systems. AGARD Meeting Turkey, 1993, pp. 13-1 – 13-12.

193. Chamis, C.C. and Singhal, S.N: Probabilistic Simulation of Concurrent Engineering of Propulsion Systems. AGARD Meeting Turkey, 1993, pp. 4-1 – 4-10.

194. Chamis, C.C. and Saravanos, D.A: Process/Composite Concurrent Tailoring of SiC/Ti Composites. AGARD 77th Meeting, France, 1993, pp. 16-1 – 16-7.

195. Chamis, C.C. and Shiao, M.C: Probabilistic Assessment of Composite and Smart Composite Structures. IUTAM Symposium, San Antonio, 1993. pp. 100-119.

196. Minnetyan, L. and Chamis, C.C.: Effects of Progressive Fracture on the Buckling Resistance of Composite Structures. ICCM/9 Composite Properties & Applications, Madrid, Spain, 1993. Vol. VI, pp 369-376.

197. Shiao, M.C., Abumeri, G.H., Singhal, S.N. and Chamis, C.C.: Probabilistic Buckling of Composite Shells. ICCM/9 Composite Properties & Applications, Madrid, Spain, 1993. Vol VI, pp. 447-454.

198. Zaretsky, E.V., Chamis, C.C., Murthy, P.L.N., Singhal, S.N. and Hopkins, D: Modeling the Future with Metal-Matrix Composites. Machine Design, 1994, pp. 124-132.

199. Murthy, P.L.N., Chamis, C.C., and Minnetyan, L: Design for Progressive Damage in Fibrous Composite Structures. 39th Int. SAMPE Symposium, California, 1994, Vol. 39, pp. 1705-1715.

200. Davy, D.T., Saravanos, D.A., Hopkins, D.A. and Chamis, C.C: Numerical Optimization and Composite Modeling Techniques Applied to Orthopedic Implants. 39th Int. SAMPE Symposium, California, 1994, Vol. 39, pp. 1992-2003.

201. Minnetyan, L., Chamis, C.C. and Murthy, P.L.N: Effect of Adhesive Thickness on The Durability of a Stiffened Composite Panel. 39th Int. SAMPE Symposium, California, 1994, Vol. 39, pp. 2004-2056.

202. Chamis, C.C., Liaw, D.G. and Singhal, S.N: Long Term Behavior of Polymer Matrix Composites. 39th Int. SAMPE Symposium, California, 1994, Vol. 39, pp. 2806-2819.

203. Chamis, C.C. and Shiao, M.C: Integrated Probabilistic Composite Design, A Proposed New Approach. 39th Int. SAMPE Symposium, California, 1994, Vol. 39, pp. 2820-2828.

204. Shiao, M.C. and Chamis, C.C: Probabilistic Design of Smart Composite Structures. 39th Int. SAMPE Symposium, California, 1994, Vol. 39, pp. 3112-3126.

205. Singhal, S.N., Shah, A.R., Chamis, C.C. and Murthy, P.L.N: Computational Simulation of Fatigue Endurance Design for Composites. 39th Int. SAMPE Symposium, California, 1994, Vol. 39, pp. 3283-3294.

206. Shiao. M.C. and Chamis, C.C: Reliability of Composite Structures with Multi-Design Criteria. 35th AIAA/ASME Conference, S. Carolina, 1994, Part 2, pp. 606-615.

207. Steinberg, E.P. and Chamis, C.C: Structural Probability Concepts Adapted to Electrical Engineering. 35th AIAA/ASME Conference, S. Carolina, 1994, Part 2, pp. 616-632.

208. Singhal, S.N., Abumeri, G.H., Shiao, M.C. and Chamis, C.C: Probabilistic Assessment of Tailored Composite Structures. 35th AIAA/ASME Conference, S. Carolina, 1994, Part 2, pp. 871-881.

209. Shah, A.R., Singhal, S.N., Murthy, P.L.N. and Chamis, C.C: Probabilistic Simulation of Long Term Behavior in Polymer Matrix Composites. 35th AIAA/ASME Conference, S. Carolina, 1994, Part 2, pp. 1095-1104.

210. Minnetyan L., Chamis, C.C. and Murthy, P.L.N: Damage Progression in Bent Composite Structural Members. 35th AIAA/ASME Conference, S. Carolina, 1994, Part 2, pp. 1173-1180.

211. Sutjahjo, E., and Chamis, C.C: Coupled Finite Element Analysis of Fluid Mechanics, Heat Transfer, and Solid Mechanics. 35th AIAA/ASME Conference, S. Carolina, 1994, Part 4, pp. 2135-2145.

212. Singhal, S.N., Tong, M.T., Murthy, P.L.N. and Chamis, C.C: Multi-Factor Interaction Model for Nonlinear Materials Behavior. ASME PD-Vol. 62, 1994, pp. 261-274.

213. Tong, M.T., Singhal, S.N., and Chamis, C.C: Computational Simulation of the Formation and Behavior of Ice. ASME PD-Vol. 62, 1994, pp. 247-259.

214. Mital, S.K., and Chamis, C.C: Thermal and Mechanical Behavior of Particulate Composite Materials. ASME PD-Vol. 62, 1994, pp. 275-283.

215. Chamis, C.C., Singhal, S.N: Coupled Multidiscipline Analysis Methods for Advanced Propulsion Systems. 30th AIAA/ASME Joint Propulsion Conference, Indianapolis, 1994, pp. 1-11.

216. Generazio, E.R., Chamis, C.C: Technology Benefit Estimator for Aerospace Propulsion Systems. 30th AIAA/ASME Joint Propulsion Conference, Indianapolis, 1994.

217. Pai, S.S. and Chamis, C.C: Probabilistic Progressive Buckling of Trusses. Journal of Spacecraft and Rockets, Vol. 31, No. 3, 1994, pp. 466-474.

218. Minnetyan, L., Chamis, C.C.,and Murthy, P.L.N: Damage Tolerance of Thick Composite Shells Under External Pressure. Naval Air Warfare Center, Aircraft Division, Report No. NAWCADWAR-94096-60, Vol. II, April 1994, pp. 85-95.

219. Shiao, M.C. and Chamis C.C: A Probabilistic Buckling Design of Stiffened Composite Structures with Cutouts. Naval Air Warfare Center, Aircraft Division, Report No. NAWCADWAR-94096-60, Vol. I, April 1994, pp. 37-52.

220. Minnetyan, L., Chamis, C. C. and Murthy, P. L. N: Damage Progression in Mechanically Fastened Composite Structural Joints. American Society for Composites, 9th Technical Conference, September 1994, pp. 397-404.

221. Chamis, C.C., Murthy, P.L.N., Singhal, S.N. and Reddy, E.S: Ice-Impact Analysis of Blades. AGARD-CP-558, November 1994, pp. 23-1,- 23-12.

222. Mital, S.K., Chamis, C.C., and Gotsis, P.K: Micro-Fracture in High-Temperature Metal-Matrix Laminates. Composite Science and Technology, 1994, pp. 59-70.

223. Generazio, E. and Chamis, C.C: Technology Benefit Estimator (T/BEST) for Aerospace Propulsion Systems. 5th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 1994, pp. 31-43.

224 Chamis, C.C. and Minnetyan, L: Progressive Fracture of Composite Offshore Risers. ASME, PD-Vol. 71, 1995, pp. 39-46.

225. Generazio, E.R. and Chamis, C.C: Benefits of Inserting Composite Technology in Engine Structures. ASME PD-Vol. 71, 1995, pp. 217-227.

226. Chamis, C.C. and Shiao, M.C: Probabilistic Composite Analysis Design. 50th Annual Conference, Composite Institute, The Society of the Plastic Industry, January 1995, Session 11-D, pp. 1-6.

227. Chamis, C.C. and Minnetyan, L: Progressive Fracture of Composite Structures. 50th Annual Conference, Composite Institute, The Society of the Plastic Industry, January 1995, Session 11-C, pp. 1-4.

228. Minnetyan, L., Rivers, J.M., Chamis, C.C. and Murthy, P.L.N: Discontinuously Stiffened Composite Panel Under Compressive Loading. Journal of Reinforce Plastics and Composites, Vol. 14, January 1995, pp. 85-98.

229. Mital, S.K., Murthy, P.L.N. and Chamis, C.C: Simulation of Ceramic Matrix Composites Behavior Including Progressive Fracture and Load Redistribution. 36th AIAA/ASME Conference, New Orleans, LA, April 1995, Part 1, pp. 480-488.

220. Shiao, M.C., Singhal, S.N. and Chamis, C.C: Network Based Parallelism of Probabilistic Composite Structural Analysis. 36th AIAA/ASME Conference, New Orleans, LA, April 1995, Part 2, pp. 889-899.

221. Gotsis, P.K and Chamis, C.C: Effect of Combined Loads on the Durability of a Stiffened Adhesively Bonded Composite Structure. 36th AIAA/ASME Conference, New Orleans, LA, April 1995, Part 2, pp. 1083-1092.

122. Sutjahjo, E. and Chamis, C.C: Multidisciplinary Finite Elements for Coupled Analysis of Fluid Mechanics, Heat Transfer, and Solid Mechanics. 36th AIAA/ASME Conference, New Orleans, LA, April 1995, Part 2, pp. 1318-1327.

223. Shah, A.R., Murthy, P.L.N. and Chamis, C.C: Effect of Cyclic Thermo-Mechanical Load on Fatigue Reliability in Polymer Matrix Composites. 36th AIAA/ASME Conference, New Orleans, LA, April 1995, Part 3, pp. 1670-1682.

224. Abumeri, G.H., Chamis, C.C., and Generazio, E.R: Insertion and Benefits of Processing Technology in Composite Structures. 40th International SAMPE Symposium, Anaheim, CA, May 1995, pp. 838-848.

225. Shiao, M.C., Singhal, S.N. and Chamis, C.C: Reliability, Risk and Cost Trade-Offs for Composite Designs. 40th International SAMPE Symposium, Anaheim, CA, May 1995, pp. 881-891.

226. Shah, A.R. and Chamis, C.C: Cyclic Load Effects on Long Term Behavior of Polymer Matrix Composites. 40th International SAMPE Symposium, Anaheim, CA, May 1995, pp. 1305-15.

227. Mital, S.K. and Chamis, C.C: Microfracture in Toughened Epoxy Composites. 40th International SAMPE Symposium, Anaheim, CA, May 1995, pp. 1330-40.

228. Mital, S.K., Murthy, P.L.N. and Chamis, C.C: Micromechanics for Ceramic Matrix Composites via Fiber Substructuring. Journal of Composite Materials, Vol. 29, No. 5, 1995, pp. 614-633.

229. Pai, S.S., and Chamis, C.C: Probabilistic Assessment of Combustor Liner Design. ASME International Gas Turbine and Aeroengine Congress and Exposition, Houston, Texas, June 1995, pp. 1-9.

230. Generazio, E.R. and Chamis, C.C: Technology Benefit Estimation (T/BEST) for Aerospace Engine Technology Propulsion Systems – Life and Maintenance. ASME, No. 95-GT-375, International Gas Turbine and Aeroengine Congress and Exposition, Houston, Texas, June 1995, pp. 1-11.

231. Chamis, C.C. and Shah, A.R: Probabilistic Sizing of Laminates with Uncertainties. Published in “High Technology Composites in Modern Applications” by the University of Patras, September 1995, pp. 498-506.

232. Minnetyan, L. and Chamis, C.C: Progressive Damage and Fracture of Graphite/Epoxy Composites Subject to Biaxial Stress States. Published in “High Technology Composites In Modern Application” by the University of Patras, September 1995, pp. 139-147.

233. Chamis, C.C and Singhal, S.N: Quantification of Uncertainties of Hot-Wet Composite Long Term Behavior. Published by AIAA in “Aerospace Thermal Structures and Materials for a New Era”, 1995, pp. 259-272.

234. Generazio, E.R. and Chamis, C.C: Benefits Estimation of New Engine Technology. Published by AIAA in “Aerospace Thermal Structures and Materials for a New Era”, 1995, pp. 384-400.

235. Minnetyan, L. and Chamis, C.C: Pressure Vessel Fracture Simulation. Published in “Fracture Mechanics,” 25th Vol. ASTM STP 1220, 1995, pp. 671-684.

236. Mital, S.K., Murthy, P.L.N.,and Chamis C.C: Simplified Micromechanics of Two-Dimensional Plain Woven Fabric Composite. Proceedings of the ASTM Materials Division, 1995, pp. 829-840.

237. Chamis, C.C. and Shiao, M.C: Probabilistic Composite Analysis Design. Proceedings of the First International Conference on Composites in Infrastructure, January 1996, pp. 264-278.

238. Chamis, C.C. and Minnetyan, L: Progressive Fracture of Composite Structures. Proceedings of the First International Conference on Composites in Infrastructure, January 1996, pp. 202-213.

239. Shah, A.R. and Chamis, C.C: Long Term Behavior of Polymer Matrix Composites – Probabilistic Assessment. Energy Week, Book V, Conference Papers, January 1996, pp. 85-92.

240. Chamis, C.C., Gotsis, P.K. and Minnetyan, L: Progressive Damage and Fracture of Adhesively Bonded Fiber Composite Pipe Joints. Energy Week, Book V, Conference Papers, January 1996, pp. 401-408.

241. Chamis, C.C., Murthy, P.L.N, Mital, S.K: Ceramic Matrix Composite Behavior – Computational Simulation. Energy Week, Book V, Conference Papers, January 1996, pp. 409-416.

242. C. C. Chamis and S. N. Singhal: Probabilistic Simulation of the Human Factor in Structural Reliability. Communications in RMSL Communications, Vol. 3, No. 1, January 1996, pp. 68-72.

243. Mase, G.T., Murthy, P.L.N. and Chamis, C.C: Probabilistic Micromechanics and Macromechanics of Polymer Matrix Composites. Advanced Ceramic Matrix Composites, 1996, pp. 47-62.

244. Generazio, E.R., Chamis, C.C: Technology Benefit Estimator (T/BEST) for Aerospace Propulsion Systems. Advanced Ceramic Matrix Composites, 1996, pp. 205-226.

245. Chamis, C.C. and Shah, A.R: Reliability of Thermomechanical Fatigue in Polymer Matrix Composites. Proceedings of Composites Institute’s 51st Annual Conference and Expo’96, February 1996, Session 21-C, pp. 1-13.

246. Chamis, C.C. and Minnetyan, L: Structural Durability of Damaged Metallic Panel Repaired with Composite Patches. Proceedings of the USAF Structural Integrity Program Conference, February 1996, pp. 609-621.

247. Gotsis, P.K., Chamis, C.C and Minnetyan, L: Defect Tolerance of Pressurized Fiber Composite Shell Structures. Proceedings of 41st International SAMPE Symposium, March 24-28, 1996. pp. 450-461.

248. Chamis, C.C: Probabilistic Vibration Assessment of Composite Engine Fan Blades. 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Part 1, April, 1996, pp. 366-376.

249. Sutjahjo, E. and Chamis, C.C: Three-Dimensional Multidisciplinary Finite Elements for Coupled Analysis Involving Fluid Mechanics, Heat Transfer, and Solid Mechanics. 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Part 1, April, 1996, pp. 486-496.

250. Abumeri, G.H. and Chamis C.C: Performance Evaluation of Conceptual Designs for High Temperature Composite Turbine Blades. 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Part 1, April, 1996, pp. 551-561.

251. Chamis, C.C. and Gotsis, P.K: Damage Tolerance of Composite Pressured Shells. 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Part 4, April, 1996, pp. 2112-2121.

252. Shah A.R. and Chamis, C.C: Cyclic Load Frequency Effect on Fatigue Reliability of Polymer Matrix Composites. 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Part 4, April, 1996, pp. 2133-2143.

253. Mital, S.K., Lee, H.-J., Murthy, P.L.N. and C. C.Chamis:Computational Simulation of Matrix Microslip Bands in Sic/Ti-15 Composite. International Journal of Damage Mechanics, Vol. 5, April 1996, pp. 138-149.

254. Tong, M.T., Singhal, S.N., Chamis, C.C. and Murthy, P.L.N: Simulation of Fatigue Behavior of High Temperature Metal Matrix Composites. ASTM Reprint from Standard Technical Publication, 1253, 1996, pp. 540-551.

255. Singhal, S.N., Abumeri, G.H., Shiao, M.C. and Chamis, C.C.: Probabilistic Assessment of Tailored Composite Structures. Communications in RMSL, Vol. 3, No. 2, July 1996, pp. 61-69.

256. Chamis, C.C: Reliability/Cost of Adaptive Intraply Hybrid Fiber Composite Structures. Probabilistic Mechanical & Structural Reliability Proceedings of the Seventh Specialty Conference by ASCE, August 1996, pp. 644-647.

257. Chamis, C.C, Murthy P.L.N., and Minnetyan, L: Progressive Fracture of Polymer Matrix Composite Structures. Elsevier Science B.V., reprinted from Theoretical and Applied Fracture Mechanics 25, 1996, pp. 1-15.

258. Chamis, C.C., Gotsis, P.K. and Minnetyan, L: Damage Progression in Bolted Composite Structures. Proceedings of the 1995 USAF Structural Integrity Program Conference ASIP, Vol. II, August 1996, pp. 663-679.

259. Abumeri, G. H. and Chamis, C.C: T/BEST: A Computer Code for Assessing the Benefits of Advanced Composites in Propulsion Structures. Proceedings of the 11th DoD/NASA/FAA Conference on Fibrous Composites in Structural Design, August 26-29, 1996, pp. III-163-181. (Presentation only, visual aids included.)

260. Gotsis, P.K., Chamis, C. C. and Minnetyan, L: Progressive Fracture of Blade Containment Composite Structures. Proceedings of the 11th DoD/NASA/FAA Conference on Fibrous Composites in Structural Design, August 26-29, 1996, pp. IV-3-26. (Presentation only, visual aids included.)

261. Chamis, C.C: Reliability and Risk of Aircraft/Engine Structures. Proceedings of the 11th DoD/NASA/FAA Conference on Fibrous Composites in Structural Design, August 26-29, 1996, pp. V-3-24. (Presentation only, visual aids included.)

262. Mc.Knight, R.L., Hartle, M.S., Gotsis, P.K. and Chamis, C.C.: Code Certification Process for Multidisciplinary Analysis/Design Optimization. 6th AIAA/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Part 1, September 1996, pp. 448-458.

263. Abumeri, G.H. and Chamis, C.C: Assessment of Engine Structures Enabling Technology Benefits for High Speed Aircraft. 6th AIAA/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Part 2, September 1996, pp. 1398-1408.

264. Chamis, C.C. and Gotsis, P.K: Infrastructure for Coupled Multi-Disciplinary Problems in Engine Structures. 6th AIAA/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Part 2, September 1996, pp. 1409-1418.

265 Gotsis, P.K., Chamis, C.C. and Minnetyan, L: Computational Simulation of Damage Progression of Composite Thin Shells Subjected to Mechanical Loads. Elsevier Science B.V., reprinted from Theoretical and Applied Fracture Mechanics 25, 1996, pp. 211-224.

266. Mital, S.K., Murthy, P.L.N. Murthy, Chamis, C.C: Computational Simulation of Microfracture in High Temperature Composites. Elsevier Science B.V., reprinted from Theoretical and Applied Fracture Mechanics 25, 1996, pp. 203-209.

267. Chamis, C.C. and Abumeri, G.H: Performance Evaluation of Conceptual Design for High Temperature Composite Turbine Blades. Proceedings of the American Society for Composites, 11th Technical Conference, October 1996, pp. 40-49.

268. Chamis, C.C., Murthy, P.L.N. and Singhal, S.N: Computational Simulation of Hot Composite Structures. NASA Reference Publication No. 1361, November 1996, pp. 95-106.

269. Sutjahjo, E and Chamis, C.C: Multidisciplinary Coupled Finite Element Procedures for Fluid Mechanics, Heat Transfer, and Solid Mechanics. Ames Research Center Computational Aerosciences Workshop 1996 Conference Proceedings, pp. 251-256.

270. Mital, S.K., Murthy, P.L.N. and Chamis, C.C: Computational Simulation of Microfracture in High Temperature Composites, Elsevier, Theoretical and Applied Fracture Mechanics, November/December 1996, pp. 203-209.

271. P.K. Gotsis, Chamis, C.C. and Minnetyan, L: Computational Simulation of Damage Progression of Composite Thin Shells Subjected to Mechanical Loads Elsevier, Theoretical and Applied Fracture Mechanics, November/December 1996, pp. 211-224.

272. Chamis,C. C., Gotsis, P.K., and Minnetyan, L: Progressive Fracture and Damage Tolerance of Composite Pressure Vessels. Proceedings of the International Composites Expo’97, January 1997, Session 5-C/1-8.

274. Chamis,C.C.,and Minnetyan, L: Probabilistic Assessment of Failure in Adhesively Bonded Composite Laminates. Energy Week, Book IV, conference papers, January 1997, pp. 232-239.

275. Chamis,C.C.,and Minnetyan, L: Probabilistic Evaluation of Bolted Joints in Polymer Matrix Composites. Agard-CP-590, January 1997, pp. 25/1-11.

276. Chamis, C.C: Probabilistic Approaches – Composite Design. Agard-R-815, February 1997, pp. 2/1-2/13.

277. Gotsis, P.K., Chamis, C.C. and Minnetyan, L: Progressive Fracture of Fiber Composite Build-up Structures. Journal of Reinforced Plastics and Composites,Vol. 16, No. 2/1997.

278. Minnetyan, L., and Chamis, C.C: Structural Durability of Damaged Metallic Panel Repaired with Composite Patches. Journal of Reinforced Plastics and Composites, Vol. 16, No. 3/1997.

279. Abumeri, G.H. and Chamis, C.C: Benefits of Advanced Structures Technology in Subsonic Propulsion Systems. AIAA/ASME/ASCE/AHS, 38th Structures, Structural Dynamics and Materials Conference, Part 4, AIAA, April 1997, pp. 2573-2583.

280. Chamis, C. C. and Minnetyan, L: Progressive Fracture Structural Analysis of Wind Tunnel Structures. AIAA/ASME/ASCE/AHS, 38th Structures, Structural Dynamics and Materials Conference, Part 3, AIAA, April 1997, pp. 2285-2294.

281. Chamis, C. C: Technology Insertion Benefits Assessment in Engines and Aircraft. AIAA/ASME/ASCE/AHS, 38th Structures, Structural Dynamics and Materials Conference, Part 3, AIAA, April 1997, pp. 2311-2319.

282. Minnetyan, L. and Chamis, C.C: Progressive Fracture of Composite Cylindrical Shells Subjected to External Pressure Journal of Composite Technology & Research, April 1997, Vol. 19, No. 2, pp. 65-71.

283. Shah, A.R., Murthy, P.L.N., and Chamis, C.C: Reliability of Thermomechanical Fatigue in Polymer Matrix Composites. Journal of Advanced Materials, Vol. 28, No. 3, April 1997, pp. 19-28.

284. Mital, S.K. Gotsis, P.K. and Chamis, C.C: Laminate Analogy for Composites Application to Infrastructures. Proceedings of 42nd International SAMPE Symposium, May 4-8, 1997, pp. 947-957.

285. Abumeri, G.H. and Chamis, C.C: T/BEST A Computer Code for Assessing the Benefits of Advanced Aerospace Technologies. Elsevier, Advances in Engineering Software, Vol. 28, No. 4, June 1997, pp. 231-238.

286. Gotsis, P.K., Chamis,C.C. and Minnetyan, L: Structural Integrity of Composite Containment Structures. Proceedings of the 1996 USAF Aircraft Structural Integrity Program Conference, June 1997, pp. 837-866.

287. Chamis, C.C: Fabrication Process Tailoring to Minimize Thermal Residual Stresses in Metal Matrix Composites. Proceedings of the Second International Symposium on Thermal Stresses and Related Topics, June 8-11, 1997, pp. 231-234.

288. Minnetyan, L. and Chamis, C.C: The Compact Tension, C(T), Specimen in Laminated Composite Testing. Published in Composite Materials, Fatigue and Fracture, 6th Vol. ASTM, STP 1285, 1997, pp. 531-550.

289. Chamis, C.C., Murthy, P.L.N., and Minnetyan L: Progressive Fracture in Composite Structures. Published in Composite Materials, Fatigue and Fracture, 6th Vol. ASTM, STP 1285, 1997, pp. 70-84.

290. Pai, S.S., and Chamis, C.C: Quantification of Thermal-Structural Uncertainties in Engine Combustor Composite Liners. ASME Technical Paper, No. 97-6T-108.

291. Gotsis, P.K., Chamis, C.C. and Minnetyan, L: Progressive Fracture of Blade Containment Composite Structures. Journal of Reinforced Plastics and Composites, Vol. 16, No. 15/1997, pp. 1407-1424.

292. Chamis, C. C: Probabilistic Composite Design. American Society for Testing and Materials, ASTM, STP 1242, October 1997, pp. 23-42.

293. Minnetyan, L, Gotsis, P.K. and Chamis, C. C: Progressive Damage and Fracture of Unstiffened and Stiffened Composite Pressure Vessels. Journal of Reinforced Plastics and Composites, Vol. 16, No. 18, pp.1711-24, 1997.

294. Chamis, C. C. and Gotsis, P. K: Laminate Analogy for Composite Enhanced Concrete Structures. Journal of Advanced Materials, Vol. 29, No. 1, October 1997, pp. 3-10.

295. Minnetyan, L., Lund, R.A., Chamis, C.C. and Gotsis, P.K.: Evaluation of Progressive Fracture in Woven and Non-Woven Composite Panels. 1997 USAF (ASIP) Aircraft Structural Integrity Program Conference, San Antonio, TX, Dec. 2-4, 1997, Session 9, pp. 1-24. (CD Rom)

296. Chamis, C.C. and Gotsis, P.K: Infrastructure Retrofit Design via Composite Mechanics, International Composites Expo ’98 proceedings, Session 13-E, pp. 1-8, January 1998.

297 Chamis, C.C and Minnetyan, L: Cyclic Fatigue Damage Health Monitoring of Composite Engine Structures, 3rd National Turbine Engine High Cyclic Fatigue (HCF) Conference, February 2-5, 1998, Session 12, pp. 34-43. (CD Rom)

298. Gotsis, P.K. and Chamis, C.C.: Computational Simulation of Reinforced Concrete Structures Enhanced with Fiber Composites, ASME Energy Sources Technology Conference, Houston, TX., February 1-4, 1998. (CD Rom)

299. Chamis, C.C: Probabilistic Composite Mechanics Assurance for Better-Cheaper- Faster Products, A IAA/ASME/ASCE/AHS 39th Structures, Structural Dynamics and Materials Conference, Part 3, 1998, pp. 1940-1951.

300. Minnetyan, L., Haung , D. , Chamis, C.C. and Abdi, F: Cyclic Fatigue of Composite Airfoil Structures, A IAA/ASME/ ASCE/AHS 39th Structures, Structural Dynamics and Materials Conference, Part 2, , 1998, pp. 1505-1514.

301. Shah, A.R. and Chamis, C. C: Probabilistic Assessment of Large Structures Under Pressure. A IAA/ASME/ ASCE/AHS 39th Structures, Structural Dynamics and Materials Conference, Part 2, 1998, pp. 1092-1102.

302. Abumeri, G.H. and Chamis, C. C: Benefits of Advanced Disc Sizing Criterion for Engines of High Speed Aircraft A IAA/ASME/ ASCE/AHS 39th Structures, Structural Dynamics and Materials Conference, Part 1, 1998, pp. 491-499.

303. Shiao, M. C. and Chamis, C. C: Probabilistic Evaluation of Fuselage-Type Composite Structures. Elsevier, Probabilistic Engineering Mechanics, 1998.

304. Minnetyan, L. , Chamis, C. C. and Gotsis, P..K: Damage Progression in Bolted Composites. Journal of Thermoplastic Composite Materials, Vol. 11, May 1998,

pp. 231-248.

305. Chamis, C. C.: Thermostructural Approach for Low Cost Fabrication Processing. SAMPE, Vol. 43, Book 1, 1998, pp. 665-677.

306. Chamis, C.C: Probabilistic Design/Analysis of Gas Turbine Rotors, Proceedings of Application of Probabilistic Design Methodologies to Gas Turbine Rotating Components, March 4-5, 1998, pp. 159-176.

307. Chamis, C. C. , Gotsis, P.K. and Mital, S.K: Meso-Mechanics and Meso-Structures: A Matter of Scale. Journal of Thermoplastic Composite Materials, Vol. 11, No. 5, 1998, pp. 479-490.

309. Chamis, C.C., Gotsis, P.K. and Minnetyan, L: Progressive Fracture and Damage Tolerance of Composite Pressure Vessels. Journal of Advanced Materials, Vol. 30, No. 1, June 1998, pp. 22-26.

310. Chamis, C.C., and Abumeri, G. H: Composite Fan Blades for High-Speed Aircraft. Aerospace Engineering, September 1998, pp. 32-34.

311. Gotsis, P.K., Chamis, C. C. and Minnetyan, L: Progressive Fracture of Fiber Composite Thin Shell Structures Under Internal Pressure and Axial Loads. International Journal of Damage Mechanics, Vol. 7, October 1998, pp. 332-350.

312. Gotsis, P.K., Chamis, C. C. and Minnetyan, L: Prediction of Composite Laminate Fracture: Micromechanics and Progressive Fracture. Composite Science and Technology, 1998, pp. 1137-1149.

313. Mauget, B.R., Minnetyan, L. and Chamis, C.C: Large Deformation Nonlinear Response of Soft Composite Structures via Laminate Analogy. Reprinted from Eighth Japan-U.S. Conference on Composite Materials, September 24-26, 1998.

314. Chamis, C.C: Thermostructural Approach for Low Cost Fabrication Processing. Journal of Advanced Materials, Vol. 30, No. 4, 1998., pp. 64-73.

315. Minnetyan, L., Mauget, B., Chamis, C.C., Huang, D., and Abdi, F: Progressive Fracture of Stiffened Composite Panels under Cyclic Fatigue. 1998 USAF Aircraft Structural Integrity Program Conference, San Antonio, TX, Dec. 1998, Session 7, Pages 1-13. (CD Rom)

316. Mauget, B., Minnetyan, L., and Chamis C.C: Computational Tracking of Composite Manufacturing with Fiber Preforms. 1998 USAF Aircraft Structural Integrity Program Conference, San Antonio, TX, Dec. 1998, Session 7, Pages 14-37. (CD Rom)

317. Chamis, C.C., Minnetyan, L., Mauget, B., Huang, D., and Abdi, F: Probabilistic Assessment of Fracture Progression in Composite Structures. 1998 USAF Aircraft Structural Integrity Program Conference, San Antonio, TX, Dec. 1998, Session 8, Pages 41-51. (CD Rom)

318. Chamis, C.C., Minnetyan, L., Mauget, B., Huang, D., and Abdi, F: Probabilistic Assessment of Fracture Progression in Composite Structures. 1998 USAF Aircraft Structural Integrity Program Conference, San Antonio, TX., Dec. 1998, Session 9, Pages 1-11. (CD Rom)

319. Chamis, C. C: Coupled Multidisciplinary Optimization of Engine Structural Performance. Journal of Aircraft, Vol. 36, No. 1, January –February 1999, pp. 190-199.

320. Minnetyan, L. and Chamis, C.C: Progressive Fracture of Adhesively Bonded Composite Structures. Theoretical and Applied Fracture Mechanics, Vol. 31, No. 1, 25, February-March 1999, pp. 75-84.

321. Minnetyan, L., Mauget, B., Abdi, F., Huang, D., and Chamis, C. C: Probabilistic Evaluation of Failure in Damage Composite Structures AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, Vol. 4, 1999, pp. 2927-2934.

322. Minnetyan, L. and Chamis, C. C: Damage Tolerance of Large Shell Structures. ASME, Journal of Pressure Vessel Technology, Vol. 121, May 1999, pp. 188-215.

323. Chamis, C. C. and McManus, H. L: Aging Effects in Polymer Composites. Proceedings 1999 International Composites Expo. Session 18-A, pp. 1-6. May 23-27, 1999.

324. Aiello, R. A. and Chamis, C. C: Quantification of Processing Effects on Filament Wound Pressure Vessels. 44th International SAMPE Symposium and Exposition, Vol. 44, Book 1 of 2 Books, pp. 180-189. May 23-27, 1999.

325. Abdi, F and Lorenz, R., Surdenas, J. and Delmondo, F., Chamis, C. C: A Priori Assessment for Flight Qualified Structural Integrity. 44th International SAMPE Symposium and Exposition, Vol. 44, Book 1 of 2 Books, pp. 868-875. May 23-27, 1999.

326. Minnetyan, L. and Chamis, C. C.: Progressive Fracture of Integrally Stiffened Composite Structures. 44th International SAMPE Symposium and Exposition, Vol. 44, Book 1 of 2 Books, pp. 916-930. May 23-27, 1999.

327. Murthy, Pappu L. N., Mital, Subodh K. and Chamis, Christos C., 1999 IDE Innovation Award. Integrated Composite Analyser (ICAN) for Polymer Matrix Composites (PMCs). Cleveland Enterprise Magazine, Pg. 78. Summer 1999.

328. Chamis, C.C.: Damage Tolerance and Reliability of Turbine Engine Components. RTO of NATO. RTO Meeting Proceedings 17 – Qualification of Life Extension Schemes for Engine Components. (Papers presented at the Workshop of the RTO Applied Vehicle Technology Panel (AVT)-organized by the former AGARD Structures and Materials Panel – held in Corfu, Greece, October 5-6, 1998.) Published March 1999.

329. Chamis, Christos C. and Gotsis, Pascal K., Infrastructure Retrofit Using Design Composite Mechanics. SAMPE – Journal of Advanced Materials, Vol. 31, No. 4, October 1999.

330. Chamis, Christos C., Computational Simulation Methods to Evaluate Design Concepts from Advanced Materials. International SAMPE Technical Conference Series, Vol. 31, pp. 405-416, October 1999.

331. Mital, S. K., Murthy, P.L.N. and Chamis, C. C., Computational Simulation of Continuous Fiber Reinforced Ceramic Matrix Composites Behavior. SAMPE – Journal of Advanced Materials, Vol. 32, No. 1. January 2000, pp. 46-59.

332. Chamis, C. C., Minnetyan, L. and Abdi, F., Rotorcraft Damage Tolerance Evaluated by Computational Simulation. (NATO) RTO AVT Meeting on “Application of Damage Tolerance Principles for Improved Airworthiness of Rotorcraft,” RTO Meeting Proceedings 24. February 2000, pp. 12-1 – 12-13.

333. Abdi, F., Latham, R., Delmondo, F. and Chamis, C.C.: Durability and Reliability Analysis for Flight Qualified Structural Integrity. 41st AIAA Structures, Structural Dynamics and Materials Conference, Atlanta, GA, April 3-6, 2000 – No. AIAA-2000-1513. (CD Rom)

334. Farhamand, R, Abdi, F., Huang, D. Jafroudi, H. and Chamis, C.C.: Life Prediction and Virtual Testing. 41st AIAA Structures, Structural Dynamics and Materials Conference, Atlanta, GA, April 3-6, 2000 – No. AIAA-2000-1721. (CD Rom)

335. Minnetyan, L and Chamis, C.C.: Computational Simulation of Composite Fatigue Life. 41st AIAA Structures, Structural Dynamics and Materials Conference, Atlanta, GA, April 3-6, 2000 – No. AIAA-2000-1721. (CD Rom)

336. Minnetyan, L., Chamis C.C. and Abdi, F.: Damage Tolerance of Fiber Composite Airfoils with Piezoelectric Adaptive Control System. 41st AIAA Structures, Structural Dynamics and Materials Conference, Atlanta, GA., April 3-6, 2000 – No. AIAA-2000-1504. (CD Rom)

337. Minnetyan, L., Chamis C.C., and Abdi, F.: Evaluation of Progressive Fracture in Composites at the Microstress Level. 41st AIAA Structures, Structural Dynamics and Materials Conference, Atlanta, GA., April 3-6, 2000 – No. AIAA-2000-1367. (CD Rom)

338. Abumeri, G. H., Kuguoglu, L. and Chamis, C.C.: Non-Deterministic Optimization – Composite Laminates, Beams and Blades. 41st AIAA Structures, Structural Dynamics and Materials Conference, Atlanta, GA, April 3-6, 2000 – No. AIAA-2000-1565. (CD Rom)

339. Minnetyan, Qiuzhan, L., Chamis, D.C. and Abdi, F.: Integrally Stiffened Composite Structural Durability Evaluated by Computational Simulation. 41st AIAA Structures, Structural Dynamics and Materials Conference, Atlanta, GA, April 3-6, 2000 – No. AIAA- 2000-1339. (CD Rom)

340. Minnetyan, L. and Chamis, C. C., Structural Response and Durability of Integrally Stiffened Composite Structures, “Improving Productivity Through Applications of Condition Monitoring,” Proceedings of the 54th Meeting of the Society for Machinery Failure Prevention Technology in cooperation with the American Society of Mechanical Engineers and the Society of Tribologists and Lubrication Engineers. A publication of the Society for Machinery Failure Prevention Technology (MFPT). Virginia Beach, VA, May 1-4, 2000, pp. 459-482.

341. Chamis. C. C., Murthy, P. L. N., Gotsis, P. K., Mital, S. K., Telescoping Composite Mechanics for Composite Behavior Simulation. Computer Methods in Applied Mechanics and Engineering, May 12, 2000, pp. 399-411.

342. Chamis, C.C. and Minnetyan, L., Computational Simulation of Aerospace Structures Fatigue-Life, 45th International SAMPE Symposium, Long Beach, CA, May 21-25, 2000. Volume 45, Book 2, pp. 1378-1392.

343. Chamis, C. C. and Mital, S. K., Mesomechanics Applied to Composites – A Matter of Scale, “Mesomechanics 2000,” Proceedings of an International Conference of Mechanics for Development of Science and Technology, held at Xi’an Jiaotong University, Xi’an, China, June 13-16, 2000. Volume II, pp. 623-630.

344. Published article in Cahners Research & Development Magazine regarding GENOA, a failure-analysis software. Software developed by researchers at Alpha STAR Corp., Long Beach, CA, NASA-GRC, Cleveland, OH and Clarkson University, Potsdam, NY. September 2000, Vol. 42, No. 9, pg. 149.

345. Chamis, C.C. and Abumeri, G.H.: Probabilistic Evaluation of Blade Impact Damage. 2000 USAF ASIP Conference – Session IX-Engines, San Antonio, TX, December 5-7, 2000. (CD Rom)

346. Chamis, C. C. and Minnetyan, L.: Defect/Damage Tolerance of Pressurized Fiber Composite Shells, Elsevier , Composite Structures, Vol. 51, No. 2, (2001) pp. 159-168.

347. Mauget, B. R., Minnetyan, L. and Chamis C. C., Large Deformation Nonlinear Response of Soft Composite Structures via Laminate Analogy, Journal of Advanced Materials, Vol. 34, No. 2, April 2001, pp. 21-26.

348. Minnetyan, L., Chamis, C. C., Abdi, F. and Huang, D., Probabilistic Cyclic Fatigue of Composite Structures, 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Seattle, WA, April 16-19, 2001, No. AIAA-2001- 1375, pp. 1-7. (CD Rom)

349. Li, Q., Minnetyan, L. and Chamis, C. C., Computational Simulation under PSD Fatigue Loading, 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Seattle, WA, April 16-19, 2001, No. AIAA-2001-1610, pp. 1-8. (CD Rom)

350. Minnetyan, L., Chamis, C. C., Energy Release Rates of Degrading Composite Structures, 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Seattle, WA, April 16-19, 2001, No. AIAA-2001-1641, pp. 1-8. (CD Rom)

351. Gaskin, J. G., Abumeri, G. H. and Chamis, C. C., Goodness of Fit Tests at All Percentile Levels for Probabilistic Simulation Methods, 42nd AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conference, Seattle, WA, April 16-19, 2001, No. AIAA-2001-1652, pp. 1-7. (CD Rom)

352. Minnetyan, L., Tomlinson, S., Chamis, C. C. and Abdi, F., Durability of Concrete Infrastructure, 46th International SAMPE Symposium, Vol. 46, Book 1 of 2 Books, pp. 970-984, May 6-10, 2001.

353. Minnetyan, L., Huang, D. and Chamis, C. C., Probabilistic Fatigue Life Evaluation of Composite Structures, 46th International SAMPE Symposium, Vol. 46, Book 1 of 2 Books, pp. 985-994, May 6-10, 2001.

354. Li, Q., Minnetyan, L. and Chamis, C. C., Structural Durability and Fatigue of Composites in Acoustic Environment, 46th International SAMPE Symposium, Vol. 46, Book 1 of 2 Books, pp. 995-1007, May 6-10, 2001.

355. Zhang, H., Minnetyan, L., Chamis, C. C. and Abdi, F., Microstress Level Damage Evolution in Composite Structures, 46th International SAMPE Symposium, Vol. 46, Book 1 of 2 Books, pp. 1008-1021, May 6-10, 2001.

356. Minnetyan, L., Abdi, F. and Chamis, C. C., Cyclic Fatigue Damage Evolution in Airfoil Structures, 46th International SAMPE Symposium, Vol. 46, Book 1 of 2 Books, pp. 1037-1048, May 6-10, 2001.

357. Kamat, S., Su, S., Forsyth, B. S., Keddy, C., Beeson, H. D. and Chamis, C. C., Filament Winding Simulation of a Composite Overwrapped Pressure Vessel, 46th International SAMPE Symposium, Vol. 46, Book 2 of 2 Books, pp. 1393-1401, May 6-10, 2001.

358. Huang, D., Abdi, F., Khatiblou, M. and Chamis, C. C., Impact and Tension after Impact Impact of Composite Launch Space Structure, 46th International SAMPE Symposium, Vol. 46, Book 2 of 2 Books, pp. 1402-1411, May 6-10, 2001.

359. Chamis, C. C. and Minnetyan, L., Lube-Free Composite Bearings: Are They Viable?, 46th International SAMPE Symposium, Vol. 46, Book 2 of 2 Books, pp. 1958-1966, May 6-10, 2001.

360. Chamis, C.C.: Probabilistic Fatigue: Computational Simulation. Presentation at the Fifth Annual Workshop on the Application of Probabilistic Methods for Gas Turbine Engines; sponsored by the FAA, U.S. Air Force, NASA and the U.S. Navy. Westlake, OH, June 11-13, 2001. (CD Rom)

361. Chamis, C.C. and Abumeri, G.H.: Probabilistic Substructuring for Assured Reliability Evaluations. First Annual Probabilistic Methods Conference (PMC), Irvine, CA, June 18-19, 2001. (CD Rom)

362. Mital, S. K., Murthy, P. L. N. and Chamis, C. C., Simplified Micromechanics of Plain Weave Composites, Journal of Advanced Materials, Vol. 33, No. 3, July 2001, pp. 10-17.

363. Mauget, B.R., Minnetyan, L. and Chamis, C.C., Computational Tracking of Composite Manufacturing with Fiber Preforms, Journal of Composites Technology & Research, Vol. 13, No. 4, October 2001, pp. 254-258.

364. Chamis, C.C. and Minnetyan, L., Probabilistic Evaluation of Composite Structures Fracture Life, 16th Annual ASC Conference, VA Tech.-Blacksburg, VA. ASC No. 140, September 9-12, 2001.

365. Abumeri, G.H. and Chamis, C.C.: Coupled Multi-Disciplinary Optimization for Structural Reliability and Affordability. NATO – Research and Technology Organization, Manchester, United Kingdom, No. 5 – Symposium-Part B (CD-ROM). October 8-11, 2001.

366. Chamis, C.C. and Minnetyan, L.: Integrally-Stiffened Composite Damage Tolerance Evaluated by Computational Simulation. Presented for the Biological Sketch of Professor George Simitses at the 2001 ASME International Mechanical Engineering Congress and Exposition (IMECE), New York, NY, November 11-16, 2001. (CD Rom)

367. Chamis, C.C. and Minnetyan, L.: A Multi-Factor Interaction Model (MFIM) for Damage Initiation and Progressions. Presented in the Session on Damage Initiation and Prediction in Composites at the 2001 ASME International Mechanical Engineering Congress and Exposition (IMECE), New York, NY, November 11-16, 2001. (CD Rom)

368. Chamis, C.C. and Minnetyan, L.: Cyclic Fatigue Damage Progression in Composite Structures. 2001 USAF ASIP Conference – Session IV-Fatigue, Williamsburg, VA, December 11-13, 2001. (CD Rom)

369. Chamis, C.C.: Probabilistic Methods for Structural Design and Reliability. Invited Plenary Lecture and Seminar for the Staff of RAFAEL, 42nd Israel Annual Conference on Aerospace Sciences, Tel Aviv and Haifa, Israel, February 20-21 and 24, 2002. (CD Rom)

370. Minnetyan, L. and Chamis, C.C.: Computational Simulation of Composite Fracture Toughness Parameters. 14th ASTM International Symposium on Composite Materials: Testing and Design, March 11-12, 2002, Pittsburgh, PA. Fourteenth Volume, ASTM STP 1436, pp. 224-237.

371. Abumeri, G.H. and Chamis, C.C.: A Method for Probabilistic Coupled Thermo-Structural Evaluation of Composite Structures. 43rd AIAA Structures, Structural Dynamics and Materials Conference, April 22-25, 2002, Denver, CO. – No. AIAA 2002- (CD Rom)

372. Minnetyan, L. and Chamis, C.C.: Design of Composite Structures with Uncertainties. 43rd AIAA Structures, Structural Dynamics and Materials Conference, April 22-25, 2002, Denver, CO – No, AIAA 2002-1475. (CD Rom)

373. Kuguoglu, L, Abumeri, G.H. and Chamis, C.C.: Durability and Damage Tolerance: Comparative Evaluation of Metallic and Composite Fan Blades. 43rd AIAA Structures, Structural Dynamics and Materials Conference, April 22-25, 2002, Denver, CO – No, AIAA 2002-1527. (CD Rom)

374. Abumeri, G.H. and Chamis, C.C.: Method/Computer Codes to Improve Confidence in Probabilistic Evaluations. 43rd AIAA Structures, Structural Dynamics and Materials Conference, April 22-25, 2002, Denver, CO – No, AIAA 2002-1278. (CD Rom)

375. Chamis, C.C. and Minnetyan, L.: Probabilistic Damage Tolerance for Specified Low-Risk Design. 43rd AIAA Structures, Structural Dynamics and Materials Conference, April 22-25, 2002, Denver, CO – No, AIAA 2002-1469. (CD Rom)

376. Zhang, H, Minnetyan, L. and Chamis, C.C.: Simulation of Energy Release Rates and Correlation with NDE Test Data. 47th International SAMPE Symposium, May 12-16, 2002, Long Beach, CA – Vol. 47, Book 1 of 2 Books, pp. 131-144.

377. Abumeri, G.H. and Chamis, C.C.: Coupled Multi-Disciplinary Methods for Structural Reliability and Affordability. 47th International SAMPE Symposium, May 12-16, 2002, Long Beach, CA – Vol. 47, Book 2 of 2 Books, pp. 1415-1424.

378. Minnetyan, L. and Chamis, C.C.: Cyclic Fatigue Degradation Response of Composite Structures. 47th International SAMPE Symposium, May 12-16, 2002, Long Beach, CA – Vol. 47, Book 2 of 2 Books, pp. 1632-1646.

379. Second Annual Probabilistic Methods Conference (PMC), Power Point Presentation, Probabilistic Simulation of the Human Factor in Structural Reliability. Newport Beach, CA, June 17-18, 2002. (CD Rom, pps)

380. Minnetyan, L. and Chamis, C.C.: Fiber Composite Thermomechanical Fatigue Damage Evolution via Progressive Ply Decomposition and Analysis Software. 17th Technical Conference of the American Society for Composites, October 21-23, 2002, West Lafayette, IN – No. 064. (CD Rom)

381. Minnetyan, L. and Chamis C.C.: Fiber Composite Thermomechanical Fatigue Damage Evolution Via Progressive Ply Decomposition and Analysis Software. Power Point Presentation at the 17th Annual Technical Conference of the American Society for Composites, Purdue University, West LaFayette, IN, October 21-23, 2002. (CD Rom)

382. Chamis, C.C.: Probabilistic Telescopic/Tunneling Mechanics for Composites. 17th Technical Conference of the American Society for Composites, October 21-23, 2002, West Lafayette, IN – No. 094. (CD Rom)

383. Minnetyan, L. and Chamis, C.C.: Probabilistic Fatigue Damage Progression and Fracture of Composite Structures. Power Point Presentation at the ASTM Symposium On Probabilistic Aspects of Fatigue Life Prediction, Miami Beach, FL, November 6-7, 2002. (CD Rom)

384. Gotsis, P.K., Chamis, C.C. and Minnetyan, L.: Application of Progressive Fracture Analysis for Predicting Failure Envelopes and Stress – Strain Behaviors of Composite Laminates: A Comparison with Experimental Results, Composites Science and Technology 62 (2002) pp. 1545-1559. Published by Elsevier Science Ltd.

385. Abumeri, G.H., Schmidt, J.F. and Chamis, C.C.: Aerodynamic Design of Exo-Skeletal Engine Fan Blades. 44th AIAA Structures, Structural Dynamics and Materials Conference, April 7-10, 2003, Norfolk, VA – No. AIAA 2003-1860. (CD Rom)

386. Minnetyan, L, Zhao, W. and Chamis, C.C.: Computational Damage Tracking of Detrading Adaptive Composite Structures. 44th AIAA Structures, Structural Dynamics and Materials Conference, April 7-10, 2003, Norfolk, VA – No. AIAA 2003-1566. (CD Rom)

387. Abumeri, G.H. and Chamis, C.C.: Dynamic Buckling of Adaptive Composite Shells. 44th AIAA Structures, Structural Dynamics and Materials Conference, April 7-10, 2003, Norfolk, VA – No. AIAA 2003-1809. (CD Rom)

388. Chamis, C.C. and Abumeri, G.H.: Non-Deterministic Dynamic Instability of Composite Shells. 44th AIAA Structures, Structural Dynamics and Materials Conference, April 7-10, 2003, Norfolk, VA – No. AIAA 2003-1480. (CD Rom)

390. Minnetyan, L. and Chamis, C.C.: Probabilistic Fatigue of Integrally Stiffened Composite Structures. 44th AIAA Structures, Structural Dynamics and Materials Conference, April 7-10, 2003, Norfolk, VA – No. AIAA 2003-1839. (CD Rom)

391. Kuguoglu, L., Abumeri, G.H. and Chamis, C.C.: Structural Evaluation of Exo-Skeletal Engine Fan Blades. 44th AIAA Structures, Structural Dynamics and Materials Conference, April 7-10, 2003, Norfolk, VA – No. AIAA 2003-1861. (CD Rom)

392. Zhao, W, Minnetyan, L. and Chamis, C.C.: Design of Smart Composite Structures for Durability. 48th International SAMPE Symposium, May 11-15, 2003, Long Beach, CA – Vol. 48, Book 1 of 2 Books, pp. 433-447.

393. Minnetyan, L. and Chamis, C.C.: Optimal Ply Layups for Composite Pressure Vessel Design, 48th International SAMPE Symposium, May 11-15, 2003, Long Beach, CA – Vol. 48, Book 1 of 2 Books, pp. 448-458.

394. Abumeri, G.H., Kuguoglu, L,H. and Chamis, C.C.: Composite Fan Blade Design for Advanced Engine Concepts, 48th International SAMPE Symposium, May 11-15, 2003, Long Beach, CA – Vol. 48, Book 1 of 2 Books, pp. 459-471.

395. Abumeri, G.H., Kuguoglu, L.H. and Chamis, C.C.: Computational Data Compression for Effective Storage/Retrieval, 48th International SAMPE Symposium, May 11-15, 2003, Long Beach, CA – Vol. 48, Book 1 of 2 Books, pp. 472-482.

396. Minnetyan, L. and Chamis, C.C.: Acoustic Fatigue of Composite Engine Structures, 48th International SAMPE Symposium, May 11-15, 2003, Long Beach, CA – Vol. 48, Book 2 of 2 Books, pp. 1786-1798.

397. Abumeri, G.H. and Chamis, C.C.: Non-Deterministic Tailoring of Advanced Composite Structures, ASC 18th Annual Technical Conference, October 19-22, 2003, University of Florida, Gainesville, FL, Paper No. 175 (CD Rom)

398. Zhao, W., Minnetyan, L. and Chamis, C.C.: Fracture Propagation in Composites with Biaxial Fiber Reinforcement. Journal of Reinforced Plastics & Composites, Volume 23, No. 2. 2004.

399. Chamis, C.C.: Probabilistic Simulation of Multi-Scale Composite Behavior. Theoretical and Applied Fracture Mechanics, Elsevier, Volume 41, Issues 1-3, pp. 51-61. April 2004.

400. Chamis, C.C. and Pai, S.S.: Probabilistic Fatigue: Computational Simulation. Journal of ASTM International, Vol.1, No. 8, Paper ID: JAI11560, pp. 15-29, September 2004.

401. Chamis, C.C.: Design of Smart Composite Structures in the Presence of Uncertainties. Journal of the Chinese Institute of Engineers (in honor of Prof. Sih), Vol. 27, No. 6, pp. 771- 781, October 2004.

402. Chamis, C.C. and Blankson, I.M., Exoskeletal Engine – Novel Engine Concept. SAMPE 2005, New Horizons for Materials and Processing Technologies Conference, Long Beach, CA, May 1-5, 2005. (CD Rom)

403. Chamis, C.C. and Minnetyan, L., Approximate Simulation of Polymer Composites Corrosive Degradation. SAMPE 2005, New Horizons for Materials and Processing Technologies Conference, Long Beach, CA, May 1-5, 2005. (CD Rom)

404. Minnetyan, L, Abdi, F., Huang, D. and Chamis, C.C., Progressive Fracture Simulation of Satin Weave Composite Structures. SAMPE 2005, New Horizons for Materials and Processing Technologies Conference, Long Beach, CA, May 1-5, 2005. (CD Rom)

405. Chamis, C.C. and Abumeri, G.H., Probabilistic Dynamic Buckling of Composite Shell Structures. Elsevier, Composites, Part A 36 (2005) 1368-1380.

406. Chamis, C.C. and Abumeri, G.H., Nonlinear Dynamic Buckling of a Composite Shell. NASA/TM-2006-214276 (Langley) “Collected Papers in Structural Mechanics Honoring Dr. James H. Starnes, Jr.” pp. 457-468. February 2006.